Looking for ideas on Ac Infinity t6 active intake / exhaust

[1ManGrow]

I believe with that controller you can set a min and max fan speed for each separate unit\controller
So for the intake you can set the fan speed max to 2
For the exhaust you can set the min to 3 and max to whatever.

Pretty much what I did but I set exhaust to 4 intake at 2 @ 83f. And at 3 / 1 under 83 . So far it has worked out but my leds are only at 110w now and can go to 620w. So will see what happens when I have to raise light intensity.

 

[1ManGrow]

Pretty much what I did but I set exhaust to 4 intake at 2 @ 83f. And at 3 / 1 under 83 . So far it has worked out but my leds are only at 110w now and can go to 620w. So will see what happens when I have to raise light intensity.

Edit . I am using to controller 67 to do this.

 

[1ManGrow]

"Two" it won't let me edit my post .

 

[RIS]

"Two" it won't let me edit my post .

after a specific amount of time you won't have the ability to edit.

 

[Treesomewanted77]

I’ve been running my T6 for couple years now constant with no issues. Just clean them out when they get dirty and should be good for a long time. They are great fans. In my setup I don’t even run an intake fan just the exhaust set on 2 and it pull enough air through the tent.