10x5 2000w hps

[go go kid]

im used to a 1000 watt in a 1m x 1m x2m tent, small fans in celing of tent to lower heat, uk is cold most of the year. 9 clones per tent. sadly ive never weighed out the grow from any of my grows, not on total weight anyway

 

[budolskie]

im used to a 1000 watt in a 1m x 1m x2m tent, small fans in celing of tent to lower heat, uk is cold most of the year. 9 clones per tent. sadly ive never weighed out the grow from any of my grows, not on total weight anyway

Yes uk myself fingers crossed my 8inch fan can get rid of heat quick in the summer, whats the max temps your tent gets up to please

 

[budolskie]

Few the seeds have came out already, potted a couple more up also the environment in the propogator

 

[budolskie]

Nearly have enough for my next run now..
Still havnt plugged the heated propagator in as of yet..

will that get them growing a bit faster?
Once i have plants big enough to take clones i will to side by sides in each propogator with heat and no heat.

 

[budolskie]

So the seeds went in bin with my heating needing repaired and also my shower.

So binned and started over

I have
9 gelato 45
9 runtz x layer cake
1 glukies (s1 i made that iv never tried)

I have the fan blowing on the side wall lower then the trays to strengthing the stems

Would it be ok to add nutes now

 

[budolskie]

Little update on the seeds, much better then previous attempts will pot them up in next few days into summit a little bigger before there final 8.5ltr pots

0.7 ec 5.9ph 60ml a day with syringe

 

[budolskie]

Forgot the pics

 

[sicpuppy]

Well first attempt at a journal,

Upgrading from a 8x4 with 2x600w hps to a 10x5 with 2x1000w hps....

Still using my 8" rhino fan

Just busy setting finishing setting it tomorrow, need to hang the lights and place trays in

Coco perlite 60/40
Shogun nutes
Coco a&b
Cal mag
Silicon
Active boost
Pk
Buddha tree flower burst

Going to pick 18 out of this bunch of clones

someone after my own heart, am using 2 1000 watt hps cooltube, 2 led350watt sun bright as side lighting, and i think its a 100 watt bloom led over a slower grower, hope to see pic when you set it up, what fan system are you using

 

[budolskie]

someone after my own heart, am using 2 1000 watt hps cooltube, 2 led350watt sun bright as side lighting, and i think its a 100 watt bloom led over a slower grower, hope to see pic when you set it up, what fan system are you using

An 8 inch rhino can fan theres picture on the first page and a 6 inch rhino for intake to a rhino temp controller

 

[sicpuppy]

An 8 inch rhino can fan theres picture on the first page and a 6 inch rhino for intake to a rhino temp controller

nice hope its a good grow dude

 

[budolskie]

Cheers bro, stay tuned enjoy the ride

 

[budolskie]

Set the tent back up and put 1 deck drain to 1 tray need a washer to do the other drain and tray.

Gona let the run off run to a condensate pump and be pumped down the drain out side of grow room

 

[sicpuppy]

nice

 

[budolskie]

Couple pictures from today think im gona pot up into 8.5ltr over weekend get under the hid

 

[CaptainCAVEMAN]

Nice setup man.

 

[Kola_Kreator]

Well finally getting this shit run out,

Ready for the next pips

10 motor crasher
10 blue sunset sherbet
5 lemon acia

What happened on your first run?

 

[budolskie]

What happened on your first run?

Had a shit year or so after a neighbour flood with big tent up and down, then needing repairs in my house..... last run i flowerd straight from clone and when i changed tent humidity shocked them i cut the tops off and yeild was lower then normal but still fire smoke... fingers crossed i get back into my routine like old 8x4

 

[Kola_Kreator]

Had a shit year or so after a neighbour flood with big tent up and down, then needing repairs in my house..... last run i flowerd straight from clone and when i changed tent humidity shocked them i cut the tops off and yeild was lower then normal but still fire smoke... fingers crossed i get back into my routine like old 8x4

Good luck for this run mate. If you set up your Coco on an auto water system and water every hour your lights are on the transpiration from your plants will create a lot of humidity. Then you just need to make sure you have enough airflow moving through to compensate and set the humidity where you want it. An 8 inch fan with built in humidity control is probably the go.

 

[budolskie]

Good luck for this run mate. If you set up your Coco on an auto water system and water every hour your lights are on the transpiration from your plants will create a lot of humidity. Then you just need to make sure you have enough airflow moving through to compensate and set the humidity where you want it. An 8 inch fan with built in humidity control is probably the go.

I have a humidistat and humidifier aswell just never used them yet, once i get this condensate pump set up and the run off pumping away fine il do the auto feed, i have the manifold and everything built and the lines

 

[budolskie]

Heres what i have built so far