Is Calibrating the AC Infinity probe needed?

shnkrmn

Well-Known Member
You would need a properly calibrated hygrothermometer to compare. The probe is likely to be closer out of the box. You are right that averaged errors are still errors.
 
  • Like
Reactions: xox

SofaKingHigh_

Well-Known Member
How should I proceed in this process? I feel as if I am about to make things worse if I just get an average of all the readings and offset the settings. Thank$!
If it’s new it should be close but you will definitely want to get an accurate hydrometer to calibrate. Those small ones are junk and go out of calibration in less than a year.
 

TCH

Well-Known Member
If it’s new it should be close but you will definitely want to get an accurate hydrometer to calibrate. Those small ones are junk and go out of calibration in less than a year.
Those small ones in my experience are never even calibrated. Lol. Mine have all been off between 6 and 9% so like 3-5 rh% or so.
 

TCH

Well-Known Member
Never hurts to test em. I have found 24 hours or more to be ample time to really let them settle.

 

1212ham

Well-Known Member
How should I proceed in this process? I feel as if I am about to make things worse if I just get an average of all the readings and offset the settings. Thank$!
First off, the stated accuracy of most hydrometers is +/- 3%, or even 5%.

I use 62% Boveta packs to calibrate.

ACI probes are fast and the most accurate hydrometers I own. I tested two new ones recently and they were both about +1%, my 2 year old probe is -2%. In my tent, using ACI Cloudcoms with 0.1% resolution, the 2 new probes tracked within less than 1%!
The probes are great, but my damn Cloudcom won't graph or log data! They are too busy capturing the market to fix the bugs. :cuss:

My Inkbird probes are a few years old and still very fast responding, but not so accurate. Fortunately, they can be calibrated.
 
Top