To further describe my watering... I made a prett simple pump to hose system.
-From Home Depot-
-5/8" black tubing 3x10 foot lengths
-one 5/8" tee fitting
-three 5/8" barb connectors
-ring clamps
From Petsmart
-one dog wash hose with a quick faucet connection on one end, and a shower head on the other.
--- The dog was thing is also made of 5/8" tubing, you just want the rubber quick connect and the shower head.
You'll also need a heavy duty pump.
It works like this...
Pump output gets the quickconnect end, with the tee right after it.
This will allow the water two places to go, I'll explain later...
From one end of the tee attach the 5/8 black tubing, the full length using the barb connectors to get the full 30 feet, and on the far end the shower head.
Basically we just madt the doggie shower thing have a 30 foot tube instead of a 4 foot one so far... And attached a tee in the line.
So,
That tee...
When you want to stop the flow out of the shower head, you just pinch the line...
The open ended tee lets the water out from the pump, otherwise the quick connect would blow off the plug, and the pressure would build up in the line...
The tee guarentees no pressure buildup. That's all it's for.
