Afghan Kush in AG
- Thread starter purpdaddy
- Start date
- Status
purpdaddy
Well-Known Member
i sell them.my cost on that one was 2500.00.if i were to sell it or rent it out, sell:4500.00 rent:116.00 a month w/medicare/medicaid,private insurance.They not cheap to rent and it will really help a person that has low-level blood O2 concentraton,.! minute you swear they dyin and put tem on this,yhey can go do whatever! it is called an O2 concentrator. If one is not in use,try it,they have to be maintenanced to keep up the 98% pure oxygen airflow,i have a lil device that checks it for me!...but it cant hurt!
Katatawnic
Well-Known Member
Purp, click "quote" to get the BBcode for YT vids.
It doesn't work for posting a playlist, but to post one YT vid you just copy/paste the 11 characters after of the "youtube.com/watch?v=" part of the vid's URL into the YT BBcode.[youtube]blqCTvOvilw[/youtube]
purpdaddy
Well-Known Member
[youtube]0GdmHOJTW0Y[/youtube][/quote]Purp, click "quote" to get the BBcode for YT vids.
[youtube]blqCTvOvilw[/youtube]
purpdaddy
Well-Known Member
onthedl0008
Well-Known Member
Whaddup Purps. Looking forward to the pix of the seedling man. Good to here u have green going again bro.
Hahah nice WWXNL looking forward to that to. Good stuff.
Hahah nice WWXNL looking forward to that to. Good stuff.
purpdaddy
Well-Known Member
just odered this,
The GrowLab has all the features you could ask for - and more! Outfit the GrowLab with the ventilation fan, lighting system and growing system of your choice and you will have the brightest, slickest, most affordable grow room available.
The GrowLab utilizes thermal film on the interior which is highly reflective, waterproof, and extremely insulative (offering 97% thermal protection). This film is also non-toxic and won't release any harmful gasses that can damage sensitive plants. All of the zippers used in the tent are extremely durable.
The GrowLab utilizes intake/exhaust ports that allows them to adjust to fit various sizes of ducting. Drawstrings eliminate the need for duct hose clamps and make installation of ducting and fans quick and easy. The GrowLab also utilizes the same type of socks to allow cords and tubing to enter or exit the structure while keeping light from doing the same. All GrowLab models have a sock port in the back corner of the roof where the exhaust fan can be attached. Instead of strapping the fan to the interior of the tent you can simply sit the fan in the port on the roof for an easy and effective mounting solution. Not only does this make for a secure, light-tight fit (there is no chance of the fan breaking away from the straps due to vibration and falling on the plants), it also takes one more piece of heat-generating equipment out of the grow room (although the fan can still be strapped to the interior if desired). Passive intake ports are located near the floor of the tent and have a velcro cover that can be opened and closed easily depending on how the ventilation is setup.
The GrowLab frame is constructed of 0.80mm thick metal poles, making it very rugged for everyday use. The poles are also powder coated to prevent rust, aid in installation and enhance their appearance. The poles that make up the ceiling framework are moveable, making it much easier to adjust the positioning of lights, filters or anything else you may end up hanging from them. The ceiling poles have been improved to handle significantly more weight, especially at the center (where most other tents have a tendency to sag). Their new design also allows them to snap in place, so while they are still moveable, they will stay where you want them instead of sliding around.
The new corner fittings are made from a polymer that bends under extreme pressure instead of just snapping prematurely. These fittings are much stronger than competing fittings (plastic or metal) and won't rust like metal fittings. Their design also makes installation much easier than other tents, since the frame poles slide easily into the fittings with little or no resistance. No metal tabs that rust in place or break off.
All GrowLab models ship with complete, full color, illustrated instructions.
Specifications:
Material:
Interior: highly reflective thermal film
Exterior: waterproof black canvas
Recommended lighting:
T5 fluorescent system
Dimensions:
Assembled: 2' wide x 2' deep x 5'3" tall / 24" x 24" x 63" tall / 60 x 60 x 160cm
Packed: 2.7' wide x 0.9' deep x 0.36' tall / 32.3" x 11 " x 4.3 " tall / 82 x 28 x 11cm
Ports:
Exhaust: (3) - 5" / 127mm (port adjusts to fit smaller-diameter ducting and equipment as well)
Cord access: (2) - 4" / 101mm
Miscellaneous:
Intake windows: 3
Doors: 1
my hid setup will have a cooltube with a fan and then multiple fans in the room so i dont think heat will ne an issue.ill get the box rollin this weekend.
The GrowLab has all the features you could ask for - and more! Outfit the GrowLab with the ventilation fan, lighting system and growing system of your choice and you will have the brightest, slickest, most affordable grow room available.
The GrowLab utilizes thermal film on the interior which is highly reflective, waterproof, and extremely insulative (offering 97% thermal protection). This film is also non-toxic and won't release any harmful gasses that can damage sensitive plants. All of the zippers used in the tent are extremely durable.
The GrowLab utilizes intake/exhaust ports that allows them to adjust to fit various sizes of ducting. Drawstrings eliminate the need for duct hose clamps and make installation of ducting and fans quick and easy. The GrowLab also utilizes the same type of socks to allow cords and tubing to enter or exit the structure while keeping light from doing the same. All GrowLab models have a sock port in the back corner of the roof where the exhaust fan can be attached. Instead of strapping the fan to the interior of the tent you can simply sit the fan in the port on the roof for an easy and effective mounting solution. Not only does this make for a secure, light-tight fit (there is no chance of the fan breaking away from the straps due to vibration and falling on the plants), it also takes one more piece of heat-generating equipment out of the grow room (although the fan can still be strapped to the interior if desired). Passive intake ports are located near the floor of the tent and have a velcro cover that can be opened and closed easily depending on how the ventilation is setup.
The GrowLab frame is constructed of 0.80mm thick metal poles, making it very rugged for everyday use. The poles are also powder coated to prevent rust, aid in installation and enhance their appearance. The poles that make up the ceiling framework are moveable, making it much easier to adjust the positioning of lights, filters or anything else you may end up hanging from them. The ceiling poles have been improved to handle significantly more weight, especially at the center (where most other tents have a tendency to sag). Their new design also allows them to snap in place, so while they are still moveable, they will stay where you want them instead of sliding around.
The new corner fittings are made from a polymer that bends under extreme pressure instead of just snapping prematurely. These fittings are much stronger than competing fittings (plastic or metal) and won't rust like metal fittings. Their design also makes installation much easier than other tents, since the frame poles slide easily into the fittings with little or no resistance. No metal tabs that rust in place or break off.
All GrowLab models ship with complete, full color, illustrated instructions.
Specifications:
Material:
Interior: highly reflective thermal film
Exterior: waterproof black canvas
Recommended lighting:
T5 fluorescent system
Dimensions:
Assembled: 2' wide x 2' deep x 5'3" tall / 24" x 24" x 63" tall / 60 x 60 x 160cm
Packed: 2.7' wide x 0.9' deep x 0.36' tall / 32.3" x 11 " x 4.3 " tall / 82 x 28 x 11cm
Ports:
Exhaust: (3) - 5" / 127mm (port adjusts to fit smaller-diameter ducting and equipment as well)
Cord access: (2) - 4" / 101mm
Miscellaneous:
Intake windows: 3
Doors: 1
my hid setup will have a cooltube with a fan and then multiple fans in the room so i dont think heat will ne an issue.ill get the box rollin this weekend.
FoxCompany426
Well-Known Member
You got the exact same shit I did. It's nice man, I like it. I just need to get a bigger fan. All I got is a 4" 80CFM fucking piece of shit. I'm thinking of getting one of those nice ones. The turbine ones. Expensive though, lol.
purpdaddy
Well-Known Member
yea the BP is very easy to use with very lil maintenance.I was gonna build a box today for the new starain but i ordered another BP unitYou got the exact same shit I did. It's nice man, I like it. I just need to get a bigger fan. All I got is a 4" 80CFM fucking piece of shit. I'm thinking of getting one of those nice ones. The turbine ones. Expensive though, lol.
onthedl0008
Well-Known Member
What up purp. Looks like ur gonna be all setup for this grow. Kinda getting me excited haha. Good stuff.
purpdaddy
Well-Known Member
yea man,i got the new strain in (NLxWW)and i got frantic!so i i started ordering shit that will benefit this grow.The AG is just too small(i miss my BP)HAHA.But its all good in the hood.
onthedl0008
Well-Known Member
Yea man im happy for ya. After everything ur back on ur feet. Wanna see this one succeed my friend. Let the haters hate man. U got this one coming back to u haha.
Its gonna be green in there soon im sure.
Its gonna be green in there soon im sure.
purpdaddy
Well-Known Member
it is green now.im just waitin for them to get big enough to take pics,one popped completely out the sponge and i can see the other one coming out.i just put the NLxWW into germ yesterday.This AG is a RAPID ROOTER!
purpdaddy
Well-Known Member
damn sorry to hear that! get a small growtent like i ordered
purpdaddy
Well-Known Member
ok..heres a lil update...
one sprouted with the head still in the seed,,im not cuttin it and gonna wait to see what it does its a couple days old and still looks good.The other is looking just fine.
ph 5.8-5.9 ppm somewhere around 375-400(truncheon).BP system and growlab on its way as well as hids.Ill get it all next week.(HOPEFULLY)
and the nlXww is cracking!It should be planted by tuesday!
one sprouted with the head still in the seed,,im not cuttin it and gonna wait to see what it does its a couple days old and still looks good.The other is looking just fine.
ph 5.8-5.9 ppm somewhere around 375-400(truncheon).BP system and growlab on its way as well as hids.Ill get it all next week.(HOPEFULLY)
and the nlXww is cracking!It should be planted by tuesday!
Attachments
- Status