The Flush

GoldenGanja13

Well-Known Member
Use a water hose and turn it on slow like and wait until water floods out from bottom at a very good rate, then wait 20 mins and use as much ph (6.5) water as possible and flush again. But make sure you add Molases to the 2nd flush so the plants still get something to eat.
 
Use a water hose and turn it on slow like and wait until water floods out from bottom at a very good rate, then wait 20 mins and use as much ph (6.5) water as possible and flush again. But make sure you add Molases to the 2nd flush so the plants still get something to eat.

so what if i used the bathtub would that be a bad idea i dnt know the pH of the regular house water. i use that water to water them do you think that would be alrite? also the fertillier stick i pushed in there i cant find it was like 4 weeks ago do you still think there in threre i used jobe's
 

GoldenGanja13

Well-Known Member
Bath tub water is fine, but if the ph is not set you will have problems with the plant taking in nutes. As for the fert stick, I dunno.
 

demonic1

Well-Known Member
If you did not use PH water to water your plants for this long, then you should be ok to flush without ph water. As for the time release nute stick......it is probably fully disolved now so just flush and you should be ok.
 

GoldenGanja13

Well-Known Member
You need a ph meter. They can run from 30 -80$ If you are going to continue to grow buy Nice one. when the ph is to low there are certain nutes the plants roots will not uptake and same for the ph being to high. Thats why you get your ph set.
 
Top