Dwc Grow Club

atrumblood

atrumblood

Well-Known Member
Good mornin dude.


Man I am getting a lot of props for my plant :D .

So DL, I estimate I have about 3 - 5 weeks left on my grow before I harvest. You mentioned using some extras in my nutes to help the flowers really get the frosting packed on. Could you go over that with me really fast?

If possible I want to stick with the fox farm chain.
 
O

onthedl0008

Well-Known Member
To be honest man it looks like they are doing well right now with ur current nutes bro.. Im not at all familiar with fox farm so i wouldnt want to tell u to add something ur current nutes may already have.
What u could do however.. Is get urself some Natures Nectar. And Cal-Mag and administer those for a few weeks at this point.. The Nectar is just a form of fulvic acid that helps the plants uptake the nutes u are feeding them..
The Cal-Mag is simply micro nutes.. So if FF has an equivelant micro nute product pick it up u wont be dissapointed. Ive ran mine without and with it.. The frosting factor is one thing but its going to really help pack on the wieght and fill in the buds man.
Be real carefull without a meter. And make sure u mix the Nectar in a seperate container before putting it in the res. Direct application on the roots will fringe them.

Like i said ur plant looks great. But these 2 supplements will help pack on wieght and especially make um frost up real nice.
 
Mindmelted

Mindmelted

Well-Known Member
atrumblood said:
Good mornin dude.


Man I am getting a lot of props for my plant :D .

So DL, I estimate I have about 3 - 5 weeks left on my grow before I harvest. You mentioned using some extras in my nutes to help the flowers really get the frosting packed on. Could you go over that with me really fast?

If possible I want to stick with the fox farm chain.
Click to expand...
Sure looks sweet.The fox farms additives worked great for me on the White Berry grow.
 
(Butters)

(Butters)

Well-Known Member
atrumblood said:
Good mornin dude.


Man I am getting a lot of props for my plant :D .

So DL, I estimate I have about 3 - 5 weeks left on my grow before I harvest. You mentioned using some extras in my nutes to help the flowers really get the frosting packed on. Could you go over that with me really fast?

If possible I want to stick with the fox farm chain.
Click to expand...
With 3-5 weeks left, you could think about picking up some Humboldt Gravity. It adds bud weight and density and you add it about 3-4 weeks before harvest. Just make sure your temps aren't too high or this will burn them.

-Butters :bigjoint:
 
onewize1

onewize1

Well-Known Member
hey i got a question. my babies are seedlings either og kush or grape ape i have them in a 10 gal res with reg water 9havent got my ph meter yet) they only have their round leaves and the first two pointy ones. when do i start adding nutrients. the roots haven't come through the rockwool yet and the water only has super thrive. and how often should i change the water. i plan on switching them to a18 gal res later
 
Integra21

Integra21

Well-Known Member
Here is the link to my grow. Started soil for mothers, but switched to my own dwc concocktion for the clones and up. I feel mine is unique because it was designed to be used in a very short grow room,3ft4in., and that's floor to ceiling. I have 1 tub for veg that is about 6in tall and I fill with 2.5 gallons of water untill the 3.5in net pots are 50% submerged. The tub holds 8 clones and has four 12in. triangle shapped air stones hooked to a General Hydroponics Dual Diaphram air pump. The res temps are usually between 75F-85F. I know this is high, but I feel the rediculous amount of air being put into the tub, compensates for that. Have healthy roots and a fairly large root mass. The flowering tub is an inch shorter at 5in. tall and had six 5.5in nets and four 3.5in. It has since been changed to eight 3.5in. net pots. Did this because the larger pot and more hydrotron was wasting precious root space and was wasting money in unrequired hydrotron. It had ten 12in airstones hooked up to 2 of the same gh air pumps but has been changed to six 5.5 air discs and two 12in. sticks. If you can imagine how shallow this tub is, i also had to change out the 5.5in net pots because the bottoms would sit on the air stones and crush the roots leaving the lip of the pot about a half inch above the lid of the tub. I had some fantastic results even though my setup is probly got a lot of dont do's in it.

Here's the link: https://www.rollitup.org/advanced-marijuana-cultivation/221184-balls-out-first-grow-whie.html

but incase all the talking didnt catch your interest, here are some pics from my journal:









 
O

onthedl0008

Well-Known Member
Wow man seeing some awesome stuff in here lately. Very clean and proffesional kinda makes my little spot look unworthy lol. Good stuff.
 
MuntantLizzard

MuntantLizzard

Well-Known Member
onewize1 said:
hey i got a question. my babies are seedlings either og kush or grape ape i have them in a 10 gal res with reg water 9havent got my ph meter yet) they only have their round leaves and the first two pointy ones. when do i start adding nutrients. the roots haven't come through the rockwool yet and the water only has super thrive. and how often should i change the water. i plan on switching them to a18 gal res later
Click to expand...
its okay to start with about 300 ppm for seedlings and clones even if no roots are pokeing out, superthirve wont work without the nutes present to work with. I use it in soil only because i have never seen a difference. if your nutes are fresh your ph should be correct.
 
MuntantLizzard

MuntantLizzard

Well-Known Member
Integra21 said:
Here is the link to my grow. Started soil for mothers, but switched to my own dwc concocktion for the clones and up. I feel mine is unique because it was designed to be used in a very short grow room,3ft4in., and that's floor to ceiling. I have 1 tub for veg that is about 6in tall and I fill with 2.5 gallons of water untill the 3.5in net pots are 50% submerged. The tub holds 8 clones and has four 12in. triangle shapped air stones hooked to a General Hydroponics Dual Diaphram air pump. The res temps are usually between 75F-85F. I know this is high, but I feel the rediculous amount of air being put into the tub, compensates for that. Have healthy roots and a fairly large root mass. The flowering tub is an inch shorter at 5in. tall and had six 5.5in nets and four 3.5in. It has since been changed to eight 3.5in. net pots. Did this because the larger pot and more hydrotron was wasting precious root space and was wasting money in unrequired hydrotron. It had ten 12in airstones hooked up to 2 of the same gh air pumps but has been changed to six 5.5 air discs and two 12in. sticks. If you can imagine how shallow this tub is, i also had to change out the 5.5in net pots because the bottoms would sit on the air stones and crush the roots leaving the lip of the pot about a half inch above the lid of the tub. I had some fantastic results even though my setup is probly got a lot of dont do's in it.

Here's the link: https://www.rollitup.org/advanced-marijuana-cultivation/221184-balls-out-first-grow-whie.html

but incase all the talking didnt catch your interest, here are some pics from my journal:









Click to expand...

Wheres your lab coat??? is this a NASA gro??
 
You must log in or register to reply here.
Top