I'm not *ucking around making hash (reloaded)

[IAm5toned]

wow... just wow... thats fucking incredible.

looks easy too once you got it setup right...

 

[Steadmanclan]

mmmmmmm hash... i had a bowl of sourD hash through the bong for breadfast this morning. sooo tasty. i wish my harvest was big enough to produce 83 grams!!

 

[True Stoner]

WOW thats all i have to say!!! CAn you list the steps you did and the settings!!

 

[doublejj]

What to do with 83g of fresh hash?....

Puck it!

Ran some of the chunks thru a coffee grinder, powered!

Made my own puck press.

Used good old US Nickles as dies! Look close you can see Jefferson's Monticello!

1g hash pucks!

It's going to take me awhile to puck it all up!

Peace
doublejj

 

[Steadmanclan]

that is without a doubt one of the coolest things i've ever seen done with hash..

fucking nickels??!! brilliant!

 

[doublejj]

Thanks, I'm a bit of a DIY kinda guy I guess!

I'm going to get some 5c paper rolls!

Peace
doublejj
P.S. Ask any questions you have, I'll try to answer.

 

[fdd2blk]

i can't believe you are doing that on the kitchen table. that better not leave marks.

 

[worm5376]

i can't believe you are doing that on the kitchen table. that better not leave marks.

you got some rep coming your way LOl, but apparently i have to spread the wealth till i get back to you

 

[doublejj]

i can't believe you are doing that on the kitchen table. that better not leave marks.

Can you tell that my wife is away? lol!

Peace
doublejj
P.S. Oh shit, she reads these posts!

 

[fdd2blk]

i put some powdered bubble hash in a sealed jar after it was dry. i know there was no moisture left in it because it didn't sweat in the jar. after about 4 weeks it got really gooey. i dumped it all in my palm and within minutes had a huge pressed ball of dark black goodness.

 

[doublejj]

was it on spin cycle or what?? for how long?

Sorry dawnish, I just realized I hadn't responded to your question.

I washed everything in ice water on the longest wash setting (18min) then drained & strained. Refilled & washed again.

Then reloaded the 'working' bag with fresh trim & repeated. So I washed each batch twice for a total of 4 wash cycles. Used 120# of ice.

Peace
doublejj

 

[doublejj]

The pucks are piling up!

I had heard that much of our money tests positive for drugs, but I didn't realize that it applied to coins also!

 

[northeastern lights]

J notice how your hash coins aren't really dark., I've been making coins too but with a clay extruder and I use dimes. If you heat it up a little they will press better and be darker. Not that it matters but if you don't use heat they are crumbly and will fall apart easier. I had to put wax paper over my dimes so the hash pucks will come off without sticking.

 

[That 5hit]

yeah i kind of wondered why his was not turning darker like i have seen in other keif to hash videos
but i still love the whole setup
do i have to use a new washing me.

{edit} never mind i all most threw up thinking about using an old washer
lintty hash

but i wonder if i could run plain water threw it a few times then try making hash with it

and are you running it on a regular wash or what

and give more detail on the trash can screen
are there 3 of them
100 mic
55 mic
35 mic
is there space between them

and what mic screen is the trim in

 

[That 5hit]

J notice how your hash coins aren't really dark., I've been making coins too but with a clay extruder and I use dimes. If you heat it up a little they will press better and be darker. Not that it matters but if you don't use heat they are crumbly and will fall apart easier. I had to put wax paper over my dimes so the hash pucks will come off without sticking.

how could he add heat to it
could he using plyer hold the nickel over a flame to heat them up then put them in the press???

 

[doublejj]

J notice how your hash coins aren't really dark., I've been making coins too but with a clay extruder and I use dimes. If you heat it up a little they will press better and be darker. Not that it matters but if you don't use heat they are crumbly and will fall apart easier. I had to put wax paper over my dimes so the hash pucks will come off without sticking.

Try Pam as a mold release!

Peace
doublejj

 

[doublejj]

how could he add heat to it
could he using plyer hold the nickel over a flame to heat them up then put them in the press???

I know what he means, heat the pipe while it's in the press.

This stuff is so fine it's forming-up with only pressure, no heat.

Peace
doublejj

 

[That 5hit]

do i have to use a new washing me.

{edit} never mind i all most threw up thinking about using an old washer
lintty hash

but i wonder if i could run plain water threw it a few times then try making hash with it

and are you running it on a regular wash or what

and give more detail on the trash can screen
are there 3 of them
100 mic
55 mic
35 mic
is there space between them

and what mic screen is the trim in

 

[doublejj]

yeah i kind of wondered why his was not turning darker like i have seen in other keif to hash videos
but i still love the whole setup
do i have to use a new washing me.

{edit} never mind i all most threw up thinking about using an old washer
lintty hash

but i wonder if i could run plain water threw it a few times then try making hash with it

and are you running it on a regular wash or what

and give more detail on the trash can screen
are there 3 of them
100 mic
55 mic
35 mic
is there space between them

and what mic screen is the trim in

Yeah, I couldn't bring myself to use an old washing machine.

Filled the washer with about 40# of ice 2 working bags full of trim & filled with water. Set the Doper to the longest (18min) wash cycle & drained. Left the bags inside & re-filled with water & ice & ran a second time.

Then re-filled the working bags with fresh trim & repeated everything.

Drained everything through "ACE", Doper's sidekick!

The 5gal bucket fits into a hole in the lid of ACE! It has about 50 1/2" holes drilled in the bottom & sides. I left the bottom in to support the raw bubble bags.

The 3 (100,55,35) bags are lining the bucket. The water passes thru all 3 at once. I have a large wood paint stirrer I used to move things around inside the bags as they were draining. Having 100% mesh really made the draining go faster. I found that if I kinda bounce the bucket a little up & down, it would clear the sides of the mesh bags & drain faster.

edit: I don't know the mesh of the working bags, looks like about the same as 'pantyhose' material.

Peace
doublejj

 

[That 5hit]

how much for $$ washer
and are you only going to ever use that one for hash making

and did you try to run a cycle after the hash was made to make sure nothing was left in the pipe lines