*How To Make THC DROPS.

GoodFriend

Lumberjack
so have you guys made any? is it worth it? i read most of the posts but couldnt really tell lol but that could be cuz im stoned but who really knows
nobody yet... the ones who CAN are too lazy... and the rest of us are waiting for a mass of trim to use for multiple things... haha

someday someone here will do it and make a lil faq entry about it....
 

b-rad

Well-Known Member
ok lol well once i cut my plant well see how much i get and if there is enough ill do it and do a write up on it. unless someone beats me to it lol
 

Klown

Well-Known Member
I was looking around and some people were calculating the output of 1 oz./ 1 cup and the doses are incredible.
 

Klown

Well-Known Member
20 drops per ml
30 ml per ounce
and 8 ounces to a cup

20 x 30 x 8 = 4800 drops
divide that by the average dose of 3 drops (4800/3)and you have 1600 doses that will get you super high according to anecdotal evidence.
compare that to the same ounce smoked. Assuming you smoke a measily .3g at a time 28.5/.3 =95 doses, which wouldnt get you as high.
 

moon47usaco

Well-Known Member
So why would you need an ounce... Just cut all the ingredients and do a small scale test... Like cut all by 1/4 how much could that change... It is basically a cooking recipe... No... ??

I think 400 doses is plenty for any head... =]
 

stubborn

Active Member
So why would you need an ounce... Just cut all the ingredients and do a small scale test... Like cut all by 1/4 how much could that change... It is basically a cooking recipe... No... ??

I think 400 doses is plenty for any head... =]
I agree. And to hell with using glycerol... use everclear!!! If worried about the strength of alcohol, use less alcohol than what would completely soak the green and make something that will tumble it around so all of the green gets constantly wet. Or better yet, use a lot of alcohol and when finished, throw that shit in a blender with some fresh pineapple.
 

AristoRaver

Well-Known Member
I agree. And to hell with using glycerol... use everclear!!! If worried about the strength of alcohol, use less alcohol than what would completely soak the green and make something that will tumble it around so all of the green gets constantly wet. Or better yet, use a lot of alcohol and when finished, throw that shit in a blender with some fresh pineapple.
I got about a half a shot left of green dragon just sitting in my cabinet :mrgreen:
Shits so potent tho that you cant help but pass out within the next 4 hours, especially if you sit down. Then its just over lol. On average, 1 shot of the green dragon will last someone about 7-8 hours. Mine wasnt as potent tho seeing as we used an ounce of mid instead of nugg lol. If we would have made it with nug, we would only use about a drop. Theres TONS of recipes for TONS of different variations of the drink tho.
 

pandabear

Well-Known Member
Green Dragon (drink)

From Wikipedia, the free encyclopedia

Jump to: navigation, search
This article is about the drink. For other uses, see Green Dragon.
Green Dragon is an alcoholic beverage made by leaching the leaves of the cannabis plant in a high-proof alcohol, most commonly vodka. The THC dissolves into the alcohol resulting in a dark green or brown liquid. Sugar is often also dissolved in the alcohol to mask the extremely bitter taste of the dissolved cannabinoids.
Contents

[hide]
[edit] Preparation

Green Dragon is a method for extracting the active ingredients found in cannabis buds. These chemicals, mainly tetrahydrocannabinol or THC, are insoluble in water, but much more soluble in organic solvents such as alcohol. In addition, the chemicals responsible for the bitter and "grassy" taste of cannabis buds are insoluble in alcohol, but more soluble in water. The best results are obtained by using an extremely concentrated alcohol, such as vodka.
There are two methods for extracting the cannabinoids from the buds. The first involves heating the alcohol to improve its power as a solvent. The cannabis buds are stewed in about 25cl of spirit, preferably heated in a water bath to reduce the possibility (probability, in the case of heating high-proof alcohols such as Everclear) of ignition of the alcohol vapours. The temperature of the spirit should be maintained below the boiling point of ethanol (78.4º C) to prevent the buildup of fumes. The majority of the soluble cannabinoids will be extracted by this method after about 20 minutes of heating.
The second method, which is considerably more low-tech, involves leaving cannabis buds, leaves, stems, and seeds in the spirit for several weeks or months. Over time the cannabinoids will leach from the plant matter in much the same way as in the heating method. It is common to simply open a new bottle of spirit, poke several cannabis buds into the bottle (it may be necessary to pour off or drink some of the spirit first) and reseal. The bottle must be kept tightly sealed to prevent the alcohol evaporating from the spirit. The bottle must be kept in a dark place because tetrahydrocannabinol decomposes under the influence of light.
There is some evidence to suggest that baking the dry buds and leaves prior to adding them to the alcohol in either method increases the potency of the resulting preparation[1][2]. This is because the baking process converts insoluble tetrahydrocannabinol acids into soluble THC (see decarboxylation).

[edit] Uses

Although Green Dragon can be consumed neat, it is more often served mixed with other drinks, such as soft drinks, flavored waters and vanilla extract. A popular [3][4] recipe involves mixing 3 parts lemon-lime soda, 1 part Green Dragon and a dash of honey or sugar.
 

AristoRaver

Well-Known Member
That would be the one pandabear ^_^
We even made the mixed drink using soda and honey. It looks like bubbly throw up tho once you mix it with the soda lol.
We let it sit for about 4 months, then had at lol. Now its been about 9 or 10 months that the half shot has been sitting there and I've been waiting for the right time to take it :mrgreen:
Kinda intimidated by it tho I must admit lol
</IMG>
 

peter parker

Well-Known Member
i read this today and me and some friends are gonna make the glycerin recipe i will keep you posted im going to get some glycerin right now from the wine store
 

moon47usaco

Well-Known Member
I like the glycerin idea better... =] You could add that to anything and it would not look like bubbles and throw up... =]
 

peter parker

Well-Known Member
so i got the glycerin, i found it at a wine shop $16 a litre. now i just need some killer and the patience to wait 2 months lol. for the first run i am using only a 1/4oz. weed and 1/4 cup glycerin. picture below. i will keep you updated :joint: :peace:
 

Attachments

GoodFriend

Lumberjack
nice!!!

and instead of doing droppers... what about filling gel caps with the glycerin/pot stuff?

make you're own thc pills =]
 

AristoRaver

Well-Known Member
Cant wait to hear how it turns out!

Only thing stopping me from trying it is $ lol.

And THC pills would be AWESOME! Make it happen lol
 

Klown

Well-Known Member
I agree. And to hell with using glycerol... use everclear!!! If worried about the strength of alcohol, use less alcohol than what would completely soak the green and make something that will tumble it around so all of the green gets constantly wet. Or better yet, use a lot of alcohol and when finished, throw that shit in a blender with some fresh pineapple.

only thing if you use alcohol, can't do it near work or near heavy machinery...

Well well... arnt we supossed to not be doin green at work anyway??

just saying!!!!:-?
 

bearo420

Well-Known Member
yeah saw someone talk about synthesizing weed. its been done with marinol, but the problem with weed is, its not 1 chemical. its hundreds that make us high. people who take marinol supposedly still smoke and complain because it just aint the same. so if you really wanted to lab create weed. youd be isolating like the 100 different chemicals that make the so called weed high and trying to reproduce them. But thc itself is done. try marinol and if your going to make the other ingredients that would just be too long and too much for your lifetime. but it could give your kids a jump start.
 
Top