The Best Deals Thread. Post Best Deals And Lowest Prices Links

Sub Zero

Sub Zero

Well-Known Member
Are you looking for a good deal on a RO DI 100 GPD, for around $84.00?
Check this out... http://cgi.ebay.com/RO-DI-water-purifier-100-gpd-5-stages-Reverse-osmosis_W0QQitemZ390064337574QQcmdZViewItemQQptZSmall_Kitchen_Appliances_US?hash=item5ad1a572a6

I bought this unit it's the real deal, and yes it comes with filters.
I also bought the $15 TDS meter, it's cheap and works great.
I did a side by side test at the hydro store, it is as good as the high end meters.
I could be just lucky with that meter...:bigjoint:
 
marvinev

marvinev

Well-Known Member
WaterFarm complete system. Includes Hydrofarm T5 fluoro grow light.( minus pellets and Nutes)
great condishhh only used once and i am upgrading check it out here. if you live in another state i could ship to you just email location and zip and i could estimate for you plus ill knock the price down a bit to cover some shipping.
http://losangeles.craigslist.org/lgb/grd/1541582730.html
 
D

DannyGreenEyes

Well-Known Member
Hey everyone, I have a newbie type question about Cool Tubes.

I bought three 400w HIDs from HTG Supply, 2 HPSs & 1 MH.

I'm about to start flowering and now I have to set up my veg room. I'll be taking the MH out of the main room to do it and I can't afford to deal with the heat problems caused by the cheap hood.

So here's my question. If I bought the MH from HTG, then do I have to buy the cool tube from them for it to fit?

+rep for any help. Thanks.

Also, is there anywhere I can get a big bag of something with Mycorrhiza in it? Something like MYKEs Tree & Shrub Transplanter with 7 spores per gram, I've had good success with it.
 
goofygolfer

goofygolfer

Well-Known Member
DannyGreenEyes said:
Hey everyone, I have a newbie type question about Cool Tubes.

I bought three 400w HIDs from HTG Supply, 2 HPSs & 1 MH.

I'm about to start flowering and now I have to set up my veg room. I'll be taking the MH out of the main room to do it and I can't afford to deal with the heat problems caused by the cheap hood.

So here's my question. If I bought the MH from HTG, then do I have to buy the cool tube from them for it to fit?

+rep for any help. Thanks.

Also, is there anywhere I can get a big bag of something with Mycorrhiza in it? Something like MYKEs Tree & Shrub Transplanter with 7 spores per gram, I've had good success with it.
Click to expand...
no you dont have to buy them you ould do a diy or get one off ebay

heres a couple of links 4 diy

https://www.rollitup.org/do-yourself/269191-new-ish-way-make-cool.html


https://www.rollitup.org/do-yourself/279224-diy-cool-tube.html

my personal fav

https://www.rollitup.org/do-yourself/161300-batwing-reflector-cool-tube-40-a.html

hope this helps
 
Sub Zero

Sub Zero

Well-Known Member
This the email they sent me, looks like they are willing to work with you...

Dear XXXXX

We welcome you to Plantlighting Hydroponics.

You can now take part in the various services we have to offer you. Some of these services include:

Permanent Cart - Any products added to your online cart remain there until you remove them, or check them out.
Address Book - We can now deliver your products to another address other than yours! This is perfect to send birthday gifts direct to the birthday-person themselves.
Order History - View your history of purchases that you have made with us.
Products Reviews - Share your opinions on products with our other customers.

For help with any of our online services, please email the store-owner: [email protected].
 
DaveCoulier

DaveCoulier

Well-Known Member
DannyGreenEyes said:
Hey everyone, I have a newbie type question about Cool Tubes.

I bought three 400w HIDs from HTG Supply, 2 HPSs & 1 MH.

I'm about to start flowering and now I have to set up my veg room. I'll be taking the MH out of the main room to do it and I can't afford to deal with the heat problems caused by the cheap hood.

So here's my question. If I bought the MH from HTG, then do I have to buy the cool tube from them for it to fit?

+rep for any help. Thanks.

Also, is there anywhere I can get a big bag of something with Mycorrhiza in it? Something like MYKEs Tree & Shrub Transplanter with 7 spores per gram, I've had good success with it.
Click to expand...
Danny, if you're looking to buy an inexpensive Cool-Tube, check out http://www.dchydro.com/product/2381/19-Cool-Tube-w-cord/

I promise you, its worth spending a bit of extra money for one already made. It'll be much better quality than anything any of us can make ourselves. Only problem is their cord is made for a hydrofarm ballast, so you'd need to buy an adapter cord. Or if your original reflector/hood came with your ballast, just switch out the cords like I did.

Oh and regarding Myco, check out uncle bens thread about that. The last page or two I changed my mind about their effectiveness and put up a link that gives some important info about it.
 
MoN3yb4Gs

MoN3yb4Gs

Well-Known Member
goofygolfer said:
I think this thread is awesome and it can save folks lots of $$$. Keep up the good work guys and gals
:blsmoke:
If anyone is looking for a good ph meter the milwaukee 600 is now 22.50 w/ free shipping and they also have milwaukee tds cd97 / 15.95 remember if you spend like 18.95 or so shippin FREEEEEEE . eseasongear.com http://search.store.yahoo.net/cgi-bin/nsearch?catalog=yhst-83212413117752&query=Milwaukee%20pH%20600.&searchsubmit=Go&vwcatalog=yhst-83212413117752&.autodone=http://www.eseasongear.com/tdsecmeters.html . bongsmilie
Click to expand...
I need a ph meter. I was thinking about this http://www.eseasongear.com/hahi98phphte.html
Any suggestions on a good tds meter?
What's the cheapest multi-function pen or combo meter
you've found?
 
Earl

Earl

Well-Known Member
Hanna =
Accuracy ±0.1 pH

Pinpoint =
accuracy ±0.01 pH

When you eventually need to replace the probe,
and you will with any brand, even Hanna or Pinpoint,
you can upgrade to a "dual junction lab grade" probe
and really enjoy fast response with the PinPoint.(ebay$50)
You can't upgrade the hanna

The pinpoint will last longer
and give 10x more accurate readings.
 
goofygolfer

goofygolfer

Well-Known Member
MoN3yb4Gs said:
I need a ph meter. I was thinking about this http://www.eseasongear.com/hahi98phphte.html
Any suggestions on a good tds meter?
What's the cheapest multi-function pen or combo meter
you've found?
Click to expand...
thats the one i have . its been good to me so far .just remember to keep the probe moist. a speck of paper towel and some 4.0 cal fluid will do it. i also have the hanna ppm meter also . i check calibration every other week. and its been spot on. although there are better ones on the market. i like the one i have .
 
N51

N51

Well-Known Member
these is a copy and paste from ebay these seller has allkinds of sizes,i got one for 52.00 bucks for a 8 "inline fan and 28.50 for shipping:bigjoint:
NEW 8" METAL INLINE 526 CFM TUBE FAN



click picture to enlarge





THIS IS A SALE OF A BRAND NEW NEVER OUT OF BOX 8" METAL INLINE TUBE FAN 526 CFM, RETAILS AT 159.99 COMES WITH MOUNTING BRACKET AND ELECTRICAL HOOK UP CONNECTION BOX, 110VOLT
WILL NOT CORRODE IN A IONIZED AREA. THE METAL FAN IS THE TOP ONE OF THE TWO PICTURES, PLASTIC FANS ARE ALSO AVAILABLE SAME COST

here is the link for the sellers page : http://stores.ebay.com/GLOVE-AND-SAFETY-CLOSEOUTS__W0QQ_sacatZgloveandsafetycloseoutsQQ_sidZ880757996?_nkw=inline+fans
 
goofygolfer

goofygolfer

Well-Known Member
if anyone is looking to do some low tech automation ,here's another product for you .its a simple plug in thermostat .you can get it @ home depot. $ 28.97 they'll ship it for free if you spend $49.00 http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&productId=100028788&langId=-1&catalogId=10053&ci_sku=100028788&ci_src=14110944&cm_mmc=shopping-_-googlebase-_-D26X-_-100028788&locStoreNum=119&marketID=26
The DUCSTAT® Temperature Activated Plug-In Control for automatic on-off operation of INDUCTOR® In-Line Duct Fans. Also controls 110V lights, dampers, fans, etc. Unit is designed to turn on and off when detecting a temperature change from the ambient. 5 Amp maximum load, replaceable 5 Amp fuse for safety. Grounded power cord and switched outlet. 3 user adjustable settings: function, trigger point and sensitivity. Temperature range is 40 F to 110 F to meet a wide range of applications. Plugs into 110V receptacle. ETL (C/US) Listed. 1 Year Limited Warranty.

  • Simplifies the installation of Suncourt INDUCTOR® fans
  • This unit mounts on the duct downstream from an INDUCTOR® fan
  • Controls various devices, including alarms, heat lamps, lights, etc
  • Temperature range: 40 F to 110 F. Rated at 5 Amps
  • ETL (C/US) listed. Tested to ANSI/UL Standard 507 and CSA 22.2
  • MFG Brand Name : Ductstat
  • MFG Model # : DS100
  • MFG Part # : DS100
 
You must log in or register to reply here.
Top