Integra21
Well-Known Member
OK, First, I apologize bob for this mini hijack, but I'm sure you will like the info to, so here we go.
Here is My Hydrogen MiniGen. You can see I used their drian to waste valve. I have it wall mounted and it produces very little heat. I can place my hand directly on the sides or top and it just feels warm. The Mini is ment for rooms smaller than 10x10, and mine defietly qualifys, but it struggles to keep my ppms at 1500. The weird thing is, if I go in the room, my breathing easily gets it above 1500ppm and the unit shuts off. As soon as I leave, it turns back on and bounces between 1300-1450ppm. As stated above, I am hoping this is from the propane tank being at about 10-20F. As far as the cooling, I think they list higher than nessasary cooling for safety sake. With my drain to waste, I have the flow adjusted down to barely above a ro trickle and it keeps it ice cold. But since it is so cold, condensation forms in the unit itself, and if any damage is caused by this, the packaging staes this voids the warranty. I am planning on just using a 5 gal bucket for cooling when I get a chance and will post how well this works. It will be just a bucket with no chiller, but I'm fairly confiident it will get the job done no problem. If you are using the full size and not the mini, you may need a larger res or a chiller, but Im just guessing since I have never used it. Any other questions feel free to ask. Its probly better if you ask in my journal so I'm not putting all of this info in Bobs. The Link is in the sig.
Here is My Hydrogen MiniGen. You can see I used their drian to waste valve. I have it wall mounted and it produces very little heat. I can place my hand directly on the sides or top and it just feels warm. The Mini is ment for rooms smaller than 10x10, and mine defietly qualifys, but it struggles to keep my ppms at 1500. The weird thing is, if I go in the room, my breathing easily gets it above 1500ppm and the unit shuts off. As soon as I leave, it turns back on and bounces between 1300-1450ppm. As stated above, I am hoping this is from the propane tank being at about 10-20F. As far as the cooling, I think they list higher than nessasary cooling for safety sake. With my drain to waste, I have the flow adjusted down to barely above a ro trickle and it keeps it ice cold. But since it is so cold, condensation forms in the unit itself, and if any damage is caused by this, the packaging staes this voids the warranty. I am planning on just using a 5 gal bucket for cooling when I get a chance and will post how well this works. It will be just a bucket with no chiller, but I'm fairly confiident it will get the job done no problem. If you are using the full size and not the mini, you may need a larger res or a chiller, but Im just guessing since I have never used it. Any other questions feel free to ask. Its probly better if you ask in my journal so I'm not putting all of this info in Bobs. The Link is in the sig.