Test my knowlege?. Do you need help? I can anwser some questions

[tip top toker]

Its because everywhere on earth has the same force of gravity. Pulling every object towards to middle or so called center.

wrong the earth isn't uniform, there are deviations in magnitude and direction

 

[mr.smileyface]

Can someone post up a link to where this guy lost all his rep?

https://www.rollitup.org/general-marijuana-growing/292715-2-ozs-hash.html

 

[Delux83]

ok bro here we go
lights 400w room 5x4x8 temps run from 73 at night usually around 82 during the day but some times as high as 86 humidity usually at 16 but gets as high as 21% on 2 of my 6 plants the leaves are curling they are only a few weeks old dont know why the leaves are curling. they havent been feed yet started with the first set of ture leaves but more of the leaves on the plant are doing it case it matters strain is WW

 

[mr.smileyface]

wrong the earth isn't uniform, there are deviations in magnitude and direction

The earth is oval anyways

 

[Delux83]

oh my only guess would be heat stress but this plant is the farthest from the light closest to the door. oh and the door stays open during lights on

 

[tip top toker]

are you from the states? haha no wonder you think hash is better. You only smoke good weed when its imported from BRITISH COLUMBIA. And the green hash you guys smoke down there is quite a laugh. haha You ever seen gold hashish? stamped bricks? your a newb son. I bet you havent even smoked good weed

well if i were reading that, as i am, i'd think the poster was a bit of a dick

anyways, bleary morning not thinking straight, i don't have any business in this thread, don't want to troll. *yawn* good luck with your rep battle

 

[mr.smileyface]

ok bro here we go
lights 400w room 5x4x8 temps run from 73 at night usually around 82 during the day but some times as high as 86 humidity usually at 16 but gets as high as 21% on 2 of my 6 plants the leaves are curling they are only a few weeks old dont know why the leaves are curling. they havent been feed yet started with the first set of ture leaves but more of the leaves on the plant are doing it case it matters strain is WW

Ok your humidity is wayyy to low for veging. its sappose to be 60-75. The leaves are transpiring more moisture than the roots are giving them. I think you should raise your light to 2 feet away. I keep my 400 mh 18 inches over fresh seedlings.
When you put your plants in flower you should run the lights 9pm-9am.
Now to fix your problem here. Take a spray bottle and give them a good spray down. Raise the lights... Put a bucket of water in the room to increase RH.
Ps. if you dont know what your seedling is run your light 16/8. hopefully a MH.

 

[Delux83]

yeah i have a digital ballast so cfl for seedlings mh veg hps flower mommie wow im a big boy now lol

 

[mr.smileyface]

yeah i have a digital ballast so cfl for seedlings mh veg hps flower mommie wow im a big boy now lol

my seedlings are born under the 400watt mh. Im just picking moms right now. 75 kush seedlings, 15 mango and 15 god bud..I have 23 white widows germinating right now!

 

[1stworks]

thank mr smileyface.


Heres one i cant find.


2003 ford f150

can you get ABS blink codes from
this truck by grounding a plug?

Under right hand kick pannel
there is a plug with a piggy back
plug w/ one orange and one gray wire
they loop back in to the conector.
Is this the ABS plug?

Thanks

 

[1stworks]

Iam comming up on my first harvest
and will have extra to sell to the dispensary.

I dont have a relationship w/ any.I can
give small sample and go from there.

So would you take a CHECK from
an established dispensary for extra meds or cash only????

or would you put add up on craigs list
and find my own paitents???

Iam in Colorado w/ my mmj card.

thanks

 

[oregon024]

Test my knowledge huh.Heres one for you.Name all uses for rootone cloning powder?

 

[mr.smileyface]

thank mr smileyface.


Heres one i cant find.


2003 ford f150

can you get ABS blink codes from
this truck by grounding a plug?

Under right hand kick pannel
there is a plug with a piggy back
plug w/ one orange and one gray wire
they loop back in to the conector.
Is this the ABS plug?

Thanks

Im a GMC fan.... Fords last longer tho.
Since i dont have much car/truck experiance i cant tell you.

 

[mr.smileyface]

Iam comming up on my first harvest
and will have extra to sell to the dispensary.

I dont have a relationship w/ any.I can
give small sample and go from there.

So would you take a CHECK from
an established dispensary for extra meds or cash only????

or would you put add up on craigs list
and find my own paitents???

Iam in Colorado w/ my mmj card.

thanks

Go make a relationship there. I wouldnt try and sell weed on the internet. Legal or not. you might have some criminal troubles.
Go there bring some meds and make your self known.

 

[1stworks]

Thats cool...

Thanks for your response.

 

[mr.smileyface]

Test my knowledge huh.Heres one for you.Name all uses for rootone cloning powder?

You still use powder? weird.
Well i think you use it to root clones....
Rootone has an added fungicide to help fight diseases usually associated with the humid,
moist conditions necessary to grow cuttings.

 

[tip top toker]

Test my knowledge huh.Heres one for you.Name all uses for rootone cloning powder?

use enouhg and it turns a mug o' coffe into a thickened mans drink! rarrrrrrr

 

[oregon024]

You still use powder? weird.
Well i think you use it to root clones....
Rootone has an added fungicide to help fight diseases usually associated with the humid,
moist conditions necessary to grow cuttings.

That a pretty simple answer I thought you new stuff.It has many uses in a grow room besides growing clones.You don't know I'm not telling.

 

[mr.smileyface]

That a pretty simple answer I thought you new stuff.It has many uses in a grow room besides growing clones.You don't know I'm not telling.

Im dont use that powder stuff anymore. Im gelin. I cant think of anything else the "magic" powder will do.
There is no substitutes in my room.

 

[smokingrubber]

What should I do about the tips turning white? The tops are creeping toward the light and getting tip-scortched. I can't raise the light any more. The tops are mostly about 12-13 inches away but a couple are as close as 10". 2x1000w

Should I top them or bend them down? It's pretty thick so moving them out of the light isn't really going to happen. Do they sell a little UV hat I can dress the fukrs up with?

You can check the last page of my journal for pics. I'm at work so I can't repost them. +rep for any insight and experience you're willing to share.