HulkNugs Medical Indoor Grows

Hulk Nugs

Hulk Nugs

Well-Known Member
quickrip said:
Hey Hulk, I think that the leaves turning at the end of flower is pretty normal since the plant is focuseed on making buds and everything. I know mine lokked pretty bad especially the last week. Then your remove the leaves and there's nothing but beautiful goodness underneath. Long story short I dont think there was anything to worry about. How about some more pics buddy.
Click to expand...
Thanks for your feed back quick rip

yea your right at the end the fan leaves start turning yellow taking the last little bit of energy out of them but this is different. The fan leaves are like burnt crisp i touch them and they break apart. Not all the fan leaves just some, the lights were 8 inch's away from the tallest cola witch had the most ugly looking fan leaves.

I will take some pics tonight when lights come back on.

Hey quick don't you have a 40 pint dehumidifier ?
 
jigfresh

jigfresh

Well-Known Member
Hey hulk... not sure what's going on with those leaves. Looks weird. I've had that happen a couple times on a few leaves, they get all brittle and stuff. Like everyones saying, I wouldn't worry too much.

I also agree that the buds are looking really nice. Looks like mine. Should be some real nice smoke. I like the querkle high a lot.
 
Hulk Nugs

Hulk Nugs

Well-Known Member
jigfresh said:
Hey hulk... not sure what's going on with those leaves. Looks weird. I've had that happen a couple times on a few leaves, they get all brittle and stuff. Like everyones saying, I wouldn't worry too much.

I also agree that the buds are looking really nice. Looks like mine. Should be some real nice smoke. I like the querkle high a lot.
Click to expand...

I will get up there agian bro we will compare both are querkle harvest oging to be nuts to taste to different types of the same strain!!

Yea this round i went the the aggrisive feeding so i am guessing thats why i am seeing the sensitive leaves even the light was not even 10 inchs away so might have had somthing to do with it.

Just took a sample nug its drying for a day or so then i will try her out cant wait !!!!!!!!!
 
captain chronizzle

captain chronizzle

Well-Known Member
Hulk Nugs said:
Thanks for your feed back quick rip

yea your right at the end the fan leaves start turning yellow taking the last little bit of energy out of them but this is different. The fan leaves are like burnt crisp i touch them and they break apart. Not all the fan leaves just some, the lights were 8 inch's away from the tallest cola witch had the most ugly looking fan leaves.

I will take some pics tonight when lights come back on.

Hey quick don't you have a 40 pint dehumidifier ?
Click to expand...
i think you gave them a spike of nutes at one point. always burns the fuck outta the leaves in flower. its like the nutes are being pushed out the ends of the leaves in a desperate attempt to transpire it off. been there, done that. you will learn to err, on the side of caution.
 
quickrip

quickrip

Active Member
Hulk Nugs said:
Thanks for your feed back quick rip

yea your right at the end the fan leaves start turning yellow taking the last little bit of energy out of them but this is different. The fan leaves are like burnt crisp i touch them and they break apart. Not all the fan leaves just some, the lights were 8 inch's away from the tallest cola witch had the most ugly looking fan leaves.

I will take some pics tonight when lights come back on.

Hey quick don't you have a 40 pint dehumidifier ?
Click to expand...
Sorry for not replying to this earlier I didnt see it for somne reason. anyway I do have a 40 pt and it doesnt quite do the job for me its going back soon. Captain might be right with the nute spike Idea. I also had a watering this round where the ph was off and had similar crispy leaves. Good luck with your ladies I know youll figure it out. Let me know if I can help at all.
 
Hulk Nugs

Hulk Nugs

Well-Known Member
quickrip said:
Sorry for not replying to this earlier I didnt see it for somne reason. anyway I do have a 40 pt and it doesnt quite do the job for me its going back soon. Captain might be right with the nute spike Idea. I also had a watering this round where the ph was off and had similar crispy leaves. Good luck with your ladies I know youll figure it out. Let me know if I can help at all.
Click to expand...
No worries Rip, but you are right that unit does not do the job. After looking it up it is $40 more for the 70pint, just need to check the coach cushins.

Listening to you guys i went and checked my meter and the numbers were off, so i need to grab some solution and get it calibrated.

Thanks for the support, Rip!!

burnonehomie said:
Props. Seriously.
Click to expand...
Welcome to the grow Burnonehomie, thank you !!

Just in time for the chop and harvest!!

Will get a update on the girls soon!!
 
Hulk Nugs

Hulk Nugs

Well-Known Member
Ok does any one know how to get all the resin off the work gloves ???

Just got done trimming it all up and dam two gloves covered in resin/trichs and the snips i used, gave me a nice little ball!!

Going to spend some time with the family when they go back to sleep i will get a update on here for you all!!
 
Hulk Nugs

Hulk Nugs

Well-Known Member
We are at the Harvest Ladies and Gents !!

Spent about 4 hours this morning chopping up all the colas/nugs. First went and took off all the burnt tips/leaves and big fan leaves, then went back and cleaned them up for good trim to make something.

So lets check the girls out, after 8 weeks of nutes and 1 week of flush(two days lights out).
[video=youtube;vwzaecS_X-c]http://www.youtube.com/watch?v=vwzaecS_X-c[/video]

Ok now lets see the girls with out the Fans
[video=youtube;nvDPCNxja7w]http://www.youtube.com/watch?v=nvDPCNxja7w[/video]

Some Still shots
 

Attachments

quickrip

quickrip

Active Member
Hulk Nugs said:
Ok does any one know how to get all the resin off the work gloves ???

Just got done trimming it all up and dam two gloves covered in resin/trichs and the snips i used, gave me a nice little ball!!

Going to spend some time with the family when they go back to sleep i will get a update on here for you all!!
Click to expand...
Yeah freeze the gloves and it will all come off easily. Enjoy your scissor hash bro.
 
Hulk Nugs

Hulk Nugs

Well-Known Member
thanks you St8, i will its almost dry anoter couple days

Right on Rip i will use that trick next time thank you!!
 
cazador

cazador

Active Member
Hulk Nugs said:
Ok does any one know how to get all the resin off the work gloves ???

Just got done trimming it all up and dam two gloves covered in resin/trichs and the snips i used, gave me a nice little ball!!

Going to spend some time with the family when they go back to sleep i will get a update on here for you all!!
Click to expand...


Hulknugs , Get a bottle of Everclear, put a small amount into a small sealable jar deep enough to dip your scissors and to rub the resin off your gloved fingers into the jar.
This is the easiest way to keep the scissors clean to make trimming go quicker/easier. When your done let the jar sit in a warm well vented area for a day or so (you can speed it up in a warm oven to a few hours) depends on the amount of everclear left in the jar.
When the everclear evaporates your left with a nice sized piece of black hash. enjoy. hope it helps.
 
You must log in or register to reply here.
Top