Hash

P

puff.the.magic.dragon

Active Member
anyone know a good site that shows you step-by-step directions for making good hash or just have some good step-by-step directions from experience they could share with me? thanks.:joint: (smoke 2)
 
F

fdd2blk

Well-Known Member
i bought a Bubblator last year. it is basically a small washing machine. i got mine at everbodydoesit dot com. though i made the mistake of not reading the fine print and received mine with a UK plug on it and wired for 220. i changed the plug and added an outlet next to my dryer. worked. they do sell them wired for 110. maybe a different site. thing work great. you use it with bubble bags. it like washing your fine linens. you can repeat washing until the water returns clear and it will not break up the plant matter. it paid for itself at 400$s after the third use. the clubs love the hash i bring them. felt melt bubble. i love it. my cat meows to me for it. i rate this product as a must have!
 
battosai

battosai

Well-Known Member
puff.the.magic.dragon said:
anyone know a good site that shows you step-by-step directions for making good hash or just have some good step-by-step directions from experience they could share with me? thanks.:joint: (smoke 2)
Click to expand...
im looking over this site for good hash making techniques, if i cant find some ill write some posts describing them. a great book that you can buy always for under $15 dollars (i search around and found it for $10, shipping included about a year ago) is called cannabis alchemy by D. Gold. it gives detailed information on what kinds of alcohols and ethers you can use, and how to build refluxing apparatuses for making it. i've tried a lot of what the book says (minus the portion of acetylating the thc to make it even more potent) and its scientifically sound. (meaning it worked).

im sure you can find websites with the information, you just have to search for the right words.

ill briefly describe a method for making hash, and if no one can find and post a good tutorial already written ill be forced to write one.

this, btw, is a cheap yet productive method. i'll also include the isomerization process that turns your CBD (the precursor for THC) into THC to hieghten the percentage of your finished product. isomerization converts low rotating forms of thc into high ones (delta 6, delta 9)



grind up your leaves or bud that you wish to make into hash. use a blender for this. i recommend kiefing your material with a screen first, just bc i like to add the outer crystal into the oil to make a gooball. this tho, is a matter of preference and doesnt need to be done.

so you throw all this material into a glass fishbowl. the thrift stores have perfect imitation lab equiment. none of this stuff really gets too hot, (if done correctly) so dont be scared. (we'll call this with its lid a refluxer)

pour in a good amount of 99% isopropyl (100% is best, no less than 98%) you can find it at supermarkets like meiher. now put a "V" or "U" shaped lid on top. metal or glass whatever. ill take a picture of mine so you can see. put a bag of ice on top to keep the "U" shaped piece cold, and but the whole unit on a washcloth in a few inches of boiling water in a pan. therefore your boiling water heats the alcohol inside the second container. still with me? an hour later strain it. the boiling shouldnt get about 212F bc thats the limit of water.
now is the fun part. get some clean water and some odorless 100% mineral spirit (paint thinner) . mix the alcohol equally with water in a big mason jar. leave about 1/4 of the container empty because we're going to pour in an eye balled amount of paint thinner. put the lid on, tip back and forth, open the lid and release pressure. do this for about 5-10 minutes til your clear mineral spirits is heavily tinted with oils. use ingenuity to seperate the mineral spirits from the alco-water mix. the spirits float on top. either get a syringe and suck it out or have a container with a little hole on the bottom so water can drain. NOTE mineral spirits may deterriorate many plastics right away. test before you poor. now you've seperated them. now mix the min spirits into 4 times its amount of water. do the tip and pressure release for five minutes then remove the spirits again, discarding the water. this washes impurities out of it. evaporate on a plate in a well ventilated area or put it back into the fishbowl and use boiling water to evaporate it. CAUTION min spirits evaporates more quickly so use a lower temperature.

your hash is finished, unless you want to convert them cbd's into thc and the thc into a higher rotating form.

isomerization: throw your finished product back in the refluxer, if its not there already and add more isopropyl. this time its most important to have 99% or above. (100% ethyl alcohol is preferred, 99% iso is fine) add 2-3 drops of 100% sulfuric acid (get this at autozone its called electrolyte [battery acid]) electrolyte is only 33% acid i think so do the math on what to add. 1 drop of 100% sulfuric for each gram of oil you mixed in.

reflux for 1 hour in the apparatus. do the process from earlier, mix water then add min spirits, remove the min spirits and put them in 4 parts water for washing. only this time the water you use will contain 5% baking soda. wash with this method 3x, then again a few more times with regular water to clean it. remove the min spirits, put them back in the refluxer to evaporate, viola. super hash.

can you get more potent than isomerized hash? yep. but im not going to explain it because it deals with even more dangerously explosive environments. plus ive never done it so im not going to bullshit you.

http://img54.imageshack.us/img54/7730/drawingrt6.jpg

cant find my camera so i drew it.
 
C

Calcutta

Active Member
if you make your home brew spirits your wondering what to do with the leftover's after the second run right???? well not any more. fill a big glass jar with chopped up leaves an tips from the plant ya just pulled, pour in the alcohol rated bout 98%, well it was last time i made spirits which was only last week, fill it all the way up so all your leaves and tips are covere close the lid bury it in the back yard for month or longer, i normally wait 3 months, dig your jar up make up a jig that can squeeze the left over alcohol out of all the leaves and tips, once the solid mass of leaves and tips dry ya got beautiful hash, the left over alcohol which has turned into a oily state will make some nice butter.
 
Paradox

Paradox

Well-Known Member
that google video is actually pretty awesome, makes it look so simple compared to other methods.
 
superskunkxnl

superskunkxnl

Well-Known Member
Calcutta said:
if you make your home brew spirits your wondering what to do with the leftover's after the second run right???? well not any more. fill a big glass jar with chopped up leaves an tips from the plant ya just pulled, pour in the alcohol rated bout 98%, well it was last time i made spirits which was only last week, fill it all the way up so all your leaves and tips are covere close the lid bury it in the back yard for month or longer, i normally wait 3 months, dig your jar up make up a jig that can squeeze the left over alcohol out of all the leaves and tips, once the solid mass of leaves and tips dry ya got beautiful hash, the left over alcohol which has turned into a oily state will make some nice butter.
Click to expand...
What the fuck:confused:which planet do you hail from?
 
You must log in or register to reply here.
Top