dieselsoot
Member
Attached is a drawing of my room, with deminsions and to scale.
This is what I want, but I'm open to suggestions.
3 rooms, cloning, veg, and flowering.
Hydroponic set up
Timers for the lights and watering.
Must eliminated the smell.
Black/white panda flim on the walls.
I was thinking and putting a wall in front the ac/vent to the 4' window and that room would be the flowing room aprox 6'x9'.
Then some how split the room up for the other too. I think the closet might be too small for the cloning, so it could be a supply room.
Fo some reason Im thinking the flowing room should be the biggest.
Or should I make them the same size and just alternate what the rooms are. There there will be no moving off the plants after the cloning stage is done.
Thinking 2 air cooled HPS in flowering, 2 air cooled MH in veg, and floresnt for the cloning.
Maybe run 6" duct for the lights and to a "y" that has a 8" fan then thru a scruber/filter. Either out the window or cut a hole in the floor and run it out a crawl space vent.
My 4' window is about 15' from the neigboors and in view. So Iam leaning towards a floor exit.
I could put a "y" on the A/C vent and direct it in both rooms, for the fresh air. If I need more, maybe cut another hole in the floor and use a fan to bring (cool) air in from under the house .
Osilating fan(s) in the veg and flowing rooms
My main electrical pannel in right out side. If I want to run 220V I will run power under the floor and come up and put a sub pannel in.
So what would be the best lay out to fit the most in there.
What size lights 600w?
What type of hydropontic system, Thinking the ebb type. What watering time intervals to start off with.
For the cloning rockwool or cubes?
How big of scruber would I need and is running 1 on the light duct ok.
I will have many more questions, but this will help.
Thanks
This is what I want, but I'm open to suggestions.
3 rooms, cloning, veg, and flowering.
Hydroponic set up
Timers for the lights and watering.
Must eliminated the smell.
Black/white panda flim on the walls.
I was thinking and putting a wall in front the ac/vent to the 4' window and that room would be the flowing room aprox 6'x9'.
Then some how split the room up for the other too. I think the closet might be too small for the cloning, so it could be a supply room.
Fo some reason Im thinking the flowing room should be the biggest.
Or should I make them the same size and just alternate what the rooms are. There there will be no moving off the plants after the cloning stage is done.
Thinking 2 air cooled HPS in flowering, 2 air cooled MH in veg, and floresnt for the cloning.
Maybe run 6" duct for the lights and to a "y" that has a 8" fan then thru a scruber/filter. Either out the window or cut a hole in the floor and run it out a crawl space vent.
My 4' window is about 15' from the neigboors and in view. So Iam leaning towards a floor exit.
I could put a "y" on the A/C vent and direct it in both rooms, for the fresh air. If I need more, maybe cut another hole in the floor and use a fan to bring (cool) air in from under the house .
Osilating fan(s) in the veg and flowing rooms
My main electrical pannel in right out side. If I want to run 220V I will run power under the floor and come up and put a sub pannel in.
So what would be the best lay out to fit the most in there.
What size lights 600w?
What type of hydropontic system, Thinking the ebb type. What watering time intervals to start off with.
For the cloning rockwool or cubes?
How big of scruber would I need and is running 1 on the light duct ok.
I will have many more questions, but this will help.
Thanks