subb
Well-Known Member
Alrighty, so I've been busy this weekend constructing my grow box.
So far I have just about everything I need (still a few things left) And I already started building it.
The box is 2' x 1.5 ' x 3'.
So far I've insulated and lined it with Mylar and setup my light mounts to hang.
Check it out so far:
Here is a better closeup of the PVC CFL light fixture (the pc fan is not mounted in the pic):
And here are my main plans:
So next I'm, going to try and tackle the exhaust, I'm still not 100% sure how I want to set it up. My plans probably won't work well because I'd like to have some extra insulated ducting for noise control.
Lights:
-Sun System 150w HPS for Flower
-Custom PVC CFL light fixture (holds 4x 26w CFLs) - 104 watts - for Veg
-2 side light fixtures (not pictured) holding 2x 26w CFLs each for an additional 104 watts total. Both Veg and Flower
Exhaust:
-Soler & Palau TD-125 inline fan
-Hoping to have insulated ducting in there somehow, maybe up along the left side
Next up:
-Construct side light/fan fixtures
-Construct carbon scrubber
-Get and install insulated ducting with carbon scrubber, mount this whole system
-Cut hole for power cord, test for light leaks; patch any leaks.
So what do you guys think so far? This is my first box, but I took my time with researching and planning, and I really think it paid off, at least so far. I haven't run into any major issues yet.
P.S. I just mounted those PVC pipes at the top of the box to hang the lights, a good cheapo method for doing this is: Take a soda cap, drill 2 holes in it. Drill 2 holes in your box, zip tie the cap to the wall, fit a 1/2" PVC pipe into these caps like shower curtain rods - works great! I cut little notches out of the tops so it's easier to slide the pipe in. It can be a pain to snap them into place, but once in, they aren't going anywhere. Sure beats another stop at home depot!
Be sure to check back!
So far I have just about everything I need (still a few things left) And I already started building it.
The box is 2' x 1.5 ' x 3'.
So far I've insulated and lined it with Mylar and setup my light mounts to hang.
Check it out so far:
Here is a better closeup of the PVC CFL light fixture (the pc fan is not mounted in the pic):
And here are my main plans:
So next I'm, going to try and tackle the exhaust, I'm still not 100% sure how I want to set it up. My plans probably won't work well because I'd like to have some extra insulated ducting for noise control.
Lights:
-Sun System 150w HPS for Flower
-Custom PVC CFL light fixture (holds 4x 26w CFLs) - 104 watts - for Veg
-2 side light fixtures (not pictured) holding 2x 26w CFLs each for an additional 104 watts total. Both Veg and Flower
Exhaust:
-Soler & Palau TD-125 inline fan
-Hoping to have insulated ducting in there somehow, maybe up along the left side
Next up:
-Construct side light/fan fixtures
-Construct carbon scrubber
-Get and install insulated ducting with carbon scrubber, mount this whole system
-Cut hole for power cord, test for light leaks; patch any leaks.
So what do you guys think so far? This is my first box, but I took my time with researching and planning, and I really think it paid off, at least so far. I haven't run into any major issues yet.
P.S. I just mounted those PVC pipes at the top of the box to hang the lights, a good cheapo method for doing this is: Take a soda cap, drill 2 holes in it. Drill 2 holes in your box, zip tie the cap to the wall, fit a 1/2" PVC pipe into these caps like shower curtain rods - works great! I cut little notches out of the tops so it's easier to slide the pipe in. It can be a pain to snap them into place, but once in, they aren't going anywhere. Sure beats another stop at home depot!
Be sure to check back!