got a new batch

mudd1280

Well-Known Member
why yes more an airoponic and the roots will sit inside of the 4" pipe and feed down them when watering from the sprayers.


here is some of the flowering room P9250200.jpgP9250201.jpg

here is some of the vegP9250202.jpgP9250203.jpg
and now to the new clonesP9250207.jpgP9250210.jpgP9250212.jpgP9250208.jpg
and here is the seedlings i just got, the bigger one is of the white rhino and the 2 sprouts are of the sweet toothP9250213.jpgP9250205.jpg
 

Attachments

mrgreenlungz

Active Member
why yes more an airoponic and the roots will sit inside of the 4" pipe and feed down them when watering from the sprayers.


here is some of the flowering room View attachment 1179611View attachment 1179612

here is some of the vegView attachment 1179615View attachment 1179616
and now to the new clonesView attachment 1179620View attachment 1179618View attachment 1179617View attachment 1179625
and here is the seedlings i just got, the bigger one is of the white rhino and the 2 sprouts are of the sweet toothView attachment 1179626View attachment 1179628
Damnit man it's coming along. How's it hangin in your neck of the weeds? Hope you guys are feeling better. So did you stay under 50 for the whole shit and shebang?
 

stumps

Well-Known Member
You got it going good. good luck with the new system. I saw a vid of the roots growing all the way to the rez. just a thought you might want to set your return water up so the roots can get to the rez and have the rez set up as a bubbler. lol actuley just smoked some of your stuff. HEHE found a bud I had stashed away. Ok also had a few hits of mrgrrens stuff too. wow
 

mrgreenlungz

Active Member
You got it going good. good luck with the new system. I saw a vid of the roots growing all the way to the rez. just a thought you might want to set your return water up so the roots can get to the rez and have the rez set up as a bubbler. lol actuley just smoked some of your stuff. HEHE found a bud I had stashed away. Ok also had a few hits of mrgrrens stuff too. wow
More where that came from...
 

Attachments

mudd1280

Well-Known Member
got some updated pics here is some close ups PA030229.jpgPA030227.jpgPA030228.jpgPA030230.jpgPA030231.jpgPA030232.jpg

heres the room as i come up to itPA030235.jpgPA030248.jpgPA030238.jpg

and for the stumps and greenlungs favePA030249.jpgPA030250.jpgPA030258.jpgthe white rhino from the guys that count

these are the clones i just pulled out of the cloner box i made for $30, blueberry PA030251.jpg lime green sticky,PA030252.jpg and purple HawaiianPA030256.jpg these are sweet tooth from seed PA030255.jpg this is the roots starting on the P.W.PA030259.jpg i used a layer of perlite in the bottom to see if it helps with the root growth. i also cut holes for drain in to the red cups as well PA030269.jpg PA030272.jpg
 

mrgreenlungz

Active Member
got some updated pics here is some close ups View attachment 1192118View attachment 1192119View attachment 1192120View attachment 1192121View attachment 1192122View attachment 1192123

heres the room as i come up to itView attachment 1192126View attachment 1192125View attachment 1192124

and for the stumps and greenlungs faveView attachment 1192129View attachment 1192130View attachment 1192128the white rhino from the guys that count

these are the clones i just pulled out of the cloner box i made for $30, blueberry View attachment 1192134 lime green sticky,View attachment 1192139 and purple HawaiianView attachment 1192133 these are sweet tooth from seed View attachment 1192136 this is the roots starting on the P.W.View attachment 1192135 i used a layer of perlite in the bottom to see if it helps with the root growth. i also cut holes for drain in to the red cups as well View attachment 1192132 View attachment 1192138
The WR is looking healthy as fuck, we're looking forward to our harvest out here. Keep up the hard work and it will pay off, how far into flower are you?
 

Mikov

Member
this is a good setup.

two suggestions i can chip in,
and i'm just sharing knowledge, i'm not saying your setup isn't awesome, because it is :clap:

number one is:
check if the floor those pots are sitting on is cold(it looks like a hard cement floor so it probably is), and if the bottom of the pots are colder than the top because of it. if so you should try to get them up a little bit on a table of some sort, to about hip height if you can(that'd be ideal). or just put a couple bricks under each pot with some cloth on the top brick. you want to help hold in the slight heat the roots get. a nice stable temp throughout the entire root system will promote its growth. and it'll keep your ladies from getting too cold. i think a root will be more comfortable growing in room temp soil or even slightly warm soil rather than cold soil.

numebr two is:
i wouldn't have your seedlings in a clear dixie cup. light could be penetrating deeper than you think from the sides, and light kills roots on contact. being white(white reflects something like 80 or 90% of light) the perlite could be reflecting light from the sides up into where the roots want to be. just take some duct tape or electric tape and wrap that cup up. that way the perlite won't be glowing a bright white, and the roots will feel comfortable to grow out against the sides, and won't be punished for doing so. again this will promote root growth. if they grow out to the sides anyway, and light gets on them, you'll see them start to yellow and eventually brown and die, and that's no bueno.

these are small things, and you'll have a good grow regardless, but like i said before it's just some friendly suggestions. the small things matter if you want that extra ounce or qp.

i admire your engineering, very innovative hydro table, and cheap too :clap: well done dude. you could get a 25 buck 250 gal/hr pump from a grow or pet store and just shove it in your reservoir. besides getting a little more sprinkle in your tubes, it'll take up less space because it'll be under water in the reservoir, and it'll be ridiculously quiet because of the same reason. the sound of the water pouring into your res will be louder than the pump, THAT'S how quiet they are under water, totally worth the 20 or 30 bucks in my opinion.

hope you can take something from all that, bravo mudd :mrgreen: you'll have plenty.

i'll sub :bigjoint: i wanna see this through.
 

Mikov

Member
oh by the way if you can't get the pots off the floor because you don't have the room, just put an insulting material under them. not a carpet cuz that could attract bugs and get could moldy, but something to that extent. i would say a heat pad that you could adjust, but you've got lots of pots lol

good luck you've got my support.
 

mudd1280

Well-Known Member
i have the clear dixie cups in side of red ones to block the light from getting in to the roots but your right it might still reflect some light and the thing with the pots are the ceiling height is only 7 foot so iv been thinking on some thing that wont take from my height and still insulate the pots from the floor
 

mudd1280

Well-Known Member
and the pump on the video is sufficent i just needed to add more water to the rez and it worked so much better right now i have it tore apart for the room to transplant things. but i was thinking of the 250 gph pump for $25 at the hydro shop, but the pump that is on there is a 1000 gph pump that i had laying around so i think it work. and thanks for the info and support
 

mrgreenlungz

Active Member
this is a good setup.

two suggestions i can chip in,
and i'm just sharing knowledge, i'm not saying your setup isn't awesome, because it is :clap:

number one is:
check if the floor those pots are sitting on is cold(it looks like a hard cement floor so it probably is), and if the bottom of the pots are colder than the top because of it. if so you should try to get them up a little bit on a table of some sort, to about hip height if you can(that'd be ideal). or just put a couple bricks under each pot with some cloth on the top brick. you want to help hold in the slight heat the roots get. a nice stable temp throughout the entire root system will promote its growth. and it'll keep your ladies from getting too cold. i think a root will be more comfortable growing in room temp soil or even slightly warm soil rather than cold soil.

numebr two is:
i wouldn't have your seedlings in a clear dixie cup. light could be penetrating deeper than you think from the sides, and light kills roots on contact. being white(white reflects something like 80 or 90% of light) the perlite could be reflecting light from the sides up into where the roots want to be. just take some duct tape or electric tape and wrap that cup up. that way the perlite won't be glowing a bright white, and the roots will feel comfortable to grow out against the sides, and won't be punished for doing so. again this will promote root growth. if they grow out to the sides anyway, and light gets on them, you'll see them start to yellow and eventually brown and die, and that's no bueno.

these are small things, and you'll have a good grow regardless, but like i said before it's just some friendly suggestions. the small things matter if you want that extra ounce or qp.

i admire your engineering, very innovative hydro table, and cheap too :clap: well done dude. you could get a 25 buck 250 gal/min pump from a grow or pet store and just shove it in your reservoir. besides getting a little more sprinkle in your tubes, it'll take up less space because it'll be under water in the reservoir, and it'll be ridiculously quiet because of the same reason. the sound of the water pouring into your res will be louder than the pump, THAT'S how quiet they are under water, totally worth the 20 or 30 bucks in my opinion.

hope you can take something from all that, bravo mudd :mrgreen: you'll have plenty.

i'll sub :bigjoint: i wanna see this through.
+ REP for the knowledge

mudd i totally forgot that you have cement floors
 

mudd1280

Well-Known Member
i have pic of the fastest rooting clone ever. jk . but the split of perlite on the bottom is working great check it out.PA050288.jpgPA050293.jpgPA050294.jpgPA050289.jpg

also took some night pics of the flower here you guys go. enjoi PA050283.jpgPA050277.jpgPA050287.jpgPA050282.jpgPA050279.jpgPA050284.jpg


and the White Rhino PA050296.jpg and the Sweet Tooth PA050297.jpg
 

Mikov

Member
wow that perlite is working like a root magnet, i'll have to give layering it like that a try.
 

mudd1280

Well-Known Member
so I went a buddy's house tonight and took a few shots off of the camera and this is the Lime Green Sticky PA070332.jpgPA070335.jpgPA070337.jpgPA070341.jpgPA070331.jpgPA070334.jpgPA070336.jpgPA070333.jpgPA070338.jpgPA070339.jpgPA070340.jpgPA070330.jpg
 

mudd1280

Well-Known Member
and i cut some more clones tonight to keep a good rotation goingPA080343.jpgPA080344.jpg W.W =White Widow, B.B.=Blue Berry, P.H.=Purple Hawaiian, B.K.=Bubba Kush. also took some of the flower roomPA080347.jpgPA080348.jpgPA080345.jpg
 

mudd1280

Well-Known Member
got some pics for you guys first of the White Rhino PA110368.jpgPA110369.jpg
next some of the flowering bud pornPA110376.jpgPA110396.jpgPA110402.jpgPA110399.jpgPA110386.jpgPA110387.jpgPA110392.jpgPA110375.jpgPA110378.jpgPA110388.jpgPA110380.jpgPA110385.jpgPA110389.jpgPA110390.jpgPA110397.jpgPA110382.jpg
and then some roots from the last clonesPA110371.jpg
some of the new clonesPA110372.jpg
with a video of the cloner box I made for less than $50 [video=youtube;OJKcVHOZPVU]http://www.youtube.com/watch?v=OJKcVHOZPVU[/video]
 

Attachments

Mikov

Member
how'd you get your pump to pulse like that? or is it a consistent spray and you're just making it do that?
 
Top