Club 600

[DST]

well i run the full fox farm line,and i am at the 2nd week of flower 1190-1330 ppms & ec of 1.7-1.9
and they are loveing it so far.

So for someone running a normal operating system brain like mine without an EC or ppm meter, 1330 is basically 1.33 ml of fert in a litre? (1000ml) or is that wrong....

I didn't explain the burned the shit comment. I burned all of my plants from too hot a mixture and all have recovered, but the dogs were the last and then only after continually watering with
magnesium for a gentle flush...had a cal/mag deficiency plus the hot load...finally re-potted in a coca/perlite mix and they seem a lot happier, but not hungry for nutes.


cof

Well I am glad the little girls are back on track bru.

is the pk 13/14 all you use in flower dst?

I use the BN upermix 5-2-4 throughout the whole grow, and then in flower PK13/14 added gradually over the flower period.

seeing nutes are the topic now I thought I would post my recipe.

I brew an organic guano kelp tea I use with every watering except for a week 4 or 5 quick flush with a 10 day flush at the end.


I use tap water and let it bubble for a couple days before I mix anything organic into it. The ph of the tap water is around 8. My soil is a mix of 6 parts FFOF, 2 parts earthworm castings,2 parts perlite, 1 cup of powderizd dol lime per cu foot of soiless mix.

The dry tea mix for flowering.
2/3 cup of
Peruvian seabird guano
Jamaican bat guano (in veg I use mexican bat guano)
Worm castings
and 5 tbs of maxicrop 1-0-4 powdered kelp extract.
I put this dry mix in pantyhose to act as a "tea bag"

5 tbs blackstrap molasses.
Mix into 5 gallons of dechlorinated water.
I let it brew for 24hrs and then use.

results-
Sout D for ya one more time genuity-
View attachment 1231977

Interesting how you use shit from different bats at different time, lol....too much, we use to use pantyhose(we call em tights) for straining our magics shrooms,

fuk me those look awesome bru!

 

[Heads Up]

so sannie ships to u.s??,if so can you give me a link.

and very well

I'll second that, fastest shipping so far and he is the fourth seedbank I've done business with overseas. Buy three packs of seeds, get really nice freebies and the shipping is free and fast.

http://www.sanniesshop.com/

check out the catagories in the top left and the freebies on the lower right.


cof

good lookin cof.....i see a few that i would like to add to my graden.

Not your run or the mill strains, and he has great info on his site for each strain.

 

[Heads Up]

Whodat, question. Your organic mix, how long after you brew a batch does it last? Beautiful girls.

What is pk13/14? Who makes it and is it available in the states?

My dog is sickly too and I go light with my nutes, everything at quarter strength.

 

[ENDLSCYCLE]

^^^^Nahh man...like the NPK values of a fertilizer....his P is13 and his K is 14

 

[1badmasonman]

Sour D is looking SICK whodat. Awesome job.

 

[DST]

Kind of, but the product is by Bio Nova and is called BN P-K 13+14
http://www.bionova.nl/SiteEN/En/pages/Detail1EN.asp?ID=340


complete range
http://www.bionova.nl/SiteEN/En/pages/Result2EN.asp

^^^^Nahh man...like the NPK values of a fertilizer....his P is13 and his K is 14

 

[DST]

Whodat, question. Your organic mix, how long after you brew a batch does it last? Beautiful girls.

What is pk13/14? Who makes it and is it available in the states?

My dog is sickly too and I go light with my nutes, everything at quarter strength.

there are a few companies that do similar products heads up. the BN one is pretty good though, imo.

 

[whodatnation]

Whodat, question. Your organic mix, how long after you brew a batch does it last? Beautiful girls.

Thanks HU- I think it could last a while as long as you feed the micro herd and have plenty of oxygen pumping into the brew. To my understanding they feed on the blackstrap molasses but I could be wrong. I noticed if you let it go longer than 2 days without adding more molasses its starts to stink in a bad way and has become anaerobic and should not be used. Hope that helps a little but I have allot to learn about the chemistry of organics before I can even begin to understand whats going on down there.


Oh and thanks DST and 1BMM appreciate it

 

[Hotsause]

My dogs have been real sensitive to nutes. I burned the shit out of them a month ago and they are just now recovering.


cof

Well heres the Problem Cof i flushed them out and started with a PPM level of 426 i dont think they should be burning...

 

[Dezracer]

Getting burnt out a bit working on the new room. I felt that I had planned it out well considering I'd been actually thinking of doing this for about 8 weeks now but I seem to be hitting bump after bump here. So far I've got all of my plants in their new homes and under their lights. I hooked up the 150HPS and hung it over the autos, have one of the T5 fixtures over the seedlings and clones and the original 600 is hooked up and running over it's new location.

Latest drama is that I closed off the veg/mother area using Panda film and discovered that I put the exhaust for the cooltubes in the wrong spot by about a foot so now my 6" ducting has to run through the plastic which is a little difficult to get light tight once it's cut and put around the ducting. It also made it so I can't hang one of my T5 lights where I wanted to, dammit man...

I also didn't account for needing a second intake and exhaust in that area to keep temps down so while I'm working in there it gets pretty warm with just a cirulation fan going. I think I'm going to have to pick up a sheet of OSB or something and divide the two areas with that so I can get a nice seal around the ducting where it passes through. Then I guess I'll use the Panda film to just handle the light leaks around the doors.

I did have a little pick me up today though when my second 600 showed up so at least I got that going for me, lol.

I just really want to have this all handled in the next couple of days so I'm not distracted when I go start a few little jobs I hooked up. I know that if it's not done, I'll be thinking about it while working and it will just take longer to do the work. More time = less money, you know?

 

[genuity]

DST,
1.33 of fert per liter sounds about right,do not quote me on that!!!

i do love that sour d corner whodat.....

 

[curious old fart]

...I think I'm going to have to pick up a sheet of OSB or something and divide the two areas with that so I can get a nice seal around the ducting where it passes through. Then I guess I'll use the Panda film to just handle the light leaks around the doors.

You might try the insulfoam as a room divider

http://www.lowes.com/pl_Insulated+Sheathing_4294858106_4294937087_?cm_cr=Insulation-_-Web+Activity-_-Insulation+A1+Activity+9.21.10-_-SC_Insulation++Accessories_Area1-_-22108_5_Insulated_Sheathing

This is a lowe's site, but it is available thru any home improvement store.


cof

 

[whodatnation]

cof thats just like the stuff I use in my room but the surface is silver instead of white, oh and I think I got the one inch instead of the 1/2 inch. Its cheap and easy to work with

 

[curious old fart]

The`silver side is what I meant.


cof

 

[Dezracer]

I use that stuff to insulate my walls in the grow rooms. OSB is cheaper is why I was thinking of picking it up instead of the insulfoam. It's about 1/3 the price if you get the foam that's 1/1/4" thick which is what I like to use.

 

[curious old fart]

Mr West

Your message box is full.


cof

 

[mr west]

Mr West

Your message box is full.


cof

sorry mate its empty now lol

 

[shnkrmn]

I figure when plants start to lay over on their sides, it might be time to consider ending their existence. This can be considered true at any time in a plant's life. To wit:

 

[whodatnation]

I figure when plants start to lay over on their sides, it might be time to consider ending their existence. This can be considered true at any time in a plant's life. To wit:

LOL that just means you got some PHAT ASS BUDS!

 

[whodatnation]

Just thought I would post some pics of the good old days (last harvest) lol these buds were flopping around all over the place
Oh and the last pic is some scissor hash that turned into a skull as we sparked it up...mmmmmmm tasty
BTW you can tell my camera skills were wayyyy off from the effects of all the beer and hash. What ells do you expect from a trim party?! Everyone hates trimming but it def beets working the late shift at any other job -peace