Club 600

Don Gin and Ton

Don Gin and Ton

Well-Known Member
and on the leaving thing!?!? your crazy to. the cats in the 600 are as solid as it gets. you tell by the way they carry themselves. nothing but good guys n good karma. now if we could only get some chicks up in here :lol:
 
Dezracer

Dezracer

Well-Known Member
The rest of my goodies are on the Fedex truck to be delivered today, stoked! All that will be left to do by tonight is to run the new electrical from the panel. As of now it's temporarily running from an extension cord that's on a dedicated outlet. I have the materials ro run the electrical but need more time.

The HD ext cord is fine with just one 600 running but 2 will overload it since the veg room is running off the same cord. I've only turned the 2nd one on once so I could check it out and had it plugged into a separate cord on a separate circuit.

Can't wait!!
 
genuity

genuity

Well-Known Member
Don Gin and Ton said:
and on the leaving thing!?!? your crazy to. the cats in the 600 are as solid as it gets. you tell by the way they carry themselves. nothing but good guys n good karma. now if we could only get some chicks up in here :lol:
Click to expand...

i'm jus so dame high right now!!!
but for real it would be nice
 
Dezracer

Dezracer

Well-Known Member
Don Gin and Ton said:
right here bru, been for afternoon drinks with the lads from graft haha i know early friday eh! muahahahaa it got a bit deep one of the lads let on he was abused as a kid. he's in a bad way self loathing issues. one of those nowt you can say to help but just talkin it out.

on the plus side i think i hope anyway the lad at basementlighting has highlighted why outside my crib stinks of ganj.

im running CAN> COOLTUBE> DUCT > COOLTUBE> DUCT> FAN >VENT OUT

he reckons i should take the can off the end and let it suck through duct from the room. whilst running another 5" fan attached direct to the Can filter and then out as the longer the distance between filter and fan reduces the efficacy!?!? its an out there theory but at the min im willing to try anything.
Click to expand...
I've got mine running the same as yours but most likely different fans. I'm now wondering if I'll have the same issue as you once the second 600 and table are in use. Maybe I'll take his advice as well and run another fan on the filter. Maybe a bit different though like pull air from outside the room throught the lights and back out and run the second fan connected to the filter on some ducting to exhaust the room.
 
Dezracer

Dezracer

Well-Known Member
Dude, you are just too much with that pic. That stoner chick face will most likely haunt my dreams tonight, lol
 
ZEN MASTER

ZEN MASTER

Well-Known Member
Don Gin and Ton said:
right here bru, been for afternoon drinks with the lads from graft haha i know early friday eh! muahahahaa it got a bit deep one of the lads let on he was abused as a kid. he's in a bad way self loathing issues. one of those nowt you can say to help but just talkin it out.

on the plus side i think i hope anyway the lad at basementlighting has highlighted why outside my crib stinks of ganj.

im running CAN> COOLTUBE> DUCT > COOLTUBE> DUCT> FAN >VENT OUT

he reckons i should take the can off the end and let it suck through duct from the room. whilst running another 5" fan attached direct to the Can filter and then out as the longer the distance between filter and fan reduces the efficacy!?!? its an out there theory but at the min im willing to try anything.
Click to expand...

what up bro? one fact and one opinion. fact: those fans(inline, exhaust) are desinged to pull air. dont get me wrong, they do work , for the most part, if you have the air pushing through. but they work much, much better and are more efficient when pulling. opinion: i have mine as such < FAN(on top outside of tent) < DUCTING <LIGHT <DUCTING <LIGHT <DUCTING(hanging out of the other side of the tent sucking cool air from the floor. i think you might do a little better if you just take your ducting loose and turn your fan around. hope that helps bro.


PEACE!!!
-ZEN-
 
Outdoorindica

Outdoorindica

Well-Known Member
DST that picture you asked about with the super frosty fan leaves is my lovely MK Ultra. Im so glad I did not listen to the hype of feminised MK always being hermie. Just gotta figure things out for yourself. She smells soo good and I am very happy with her main cola, for the most part what I heard was small buds and shit on the MK but the top isnt so small. Not with the 600 shining down on it. Dont think it had much choice but to grow good buds. Most of my shit is very frosty. Im thinking of making some cannabutter this run. I tried before but failed miserably. But found a total different method. One that makes more sense. I think if Dave Warden uses the slow cooker method, it must be good. Butter or bubble hash, not sure yet....
 
Dezracer

Dezracer

Well-Known Member
ZEN MASTER said:
what up bro? one fact and one opinion. fact: those fans(inline, exhaust) are desinged to pull air. dont get me wrong, they do work , for the most part, if you have the air pushing through. but they work much, much better and are more efficient when pulling. opinion: i have mine as such < FAN(on top outside of tent) < DUCTING <LIGHT <DUCTING <LIGHT <DUCTING(hanging out of the other side of the tent sucking cool air from the floor. i think you might do a little better if you just take your ducting loose and turn your fan around. hope that helps bro.


PEACE!!!
-ZEN-
Click to expand...
I believe his fan is pulling air already. He's refferring to his can filter at the beginning of the string there, I think. I think I'm going to switch to what you've got going by taking my filter out of the run that the lights are on too. Seems to make more sense to me than what I've got now. Besides, I could then control the speed at which the air is drawn through the filter without affecting the cooling of my lights. IT's actually how I installed everything at first but then I got the new filter and didn't have a decent fan for it so I just stuck it before the first light to stop filling the garage with sweet funk.

It's working good so far but I'm only using one of the lights right now with only a few plants. I don't think it's going to work very well once I fill the whole space with flowering ladies. Guess I'll be needing another fan :mad:
 
DST

DST

Well-Known Member
Hey JL73, never grown CB, but I think someone here has, if not I have seen it on RIU (maybe yours, haha.)
Awesome breakfast bowl G! Not sure your day would be much after all that lot, lol.

Dezracer, empty yer blerry inbox, I just wrote a whole message to be told to fek off, Computer Say's NO! hehe.

EDIT: oh, and good darts on the Friday, I mean Thursday avvo drinks Don!
 
Dezracer

Dezracer

Well-Known Member
Starting a new batch of cannabutter. Crokpot is warming and melting the straight butter as I type. Tried to make a batch over the weekend but forgot to pick up something to strain it (cheesecloth) and was a bit pissed at maself about it. Threw it out only to later realize I could've just used a t-shirt :wall:. May not have worked quite as good but would've worked. Wasted 1oz. of trimmings and airy little popcorn buds. :finger: is all I say to maself that night.

Making a new batch today with a little over 1/2oz of same batch of trimmings and buds and 2 sticks of butter. I typically use a higher cannabis to butter ratio but it's all I have left and I'm not about to grind up the SLH to put in there.
 
ZEN MASTER

ZEN MASTER

Well-Known Member
Dezracer said:
I believe his fan is pulling air already. He's refferring to his can filter at the beginning of the string there, I think. I think I'm going to switch to what you've got going by taking my filter out of the run that the lights are on too. Seems to make more sense to me than what I've got now. Besides, I could then control the speed at which the air is drawn through the filter without affecting the cooling of my lights. IT's actually how I installed everything at first but then I got the new filter and didn't have a decent fan for it so I just stuck it before the first light to stop filling the garage with sweet funk.

It's working good so far but I'm only using one of the lights right now with only a few plants. I don't think it's going to work very well once I fill the whole space with flowering ladies. Guess I'll be needing another fan :mad:
Click to expand...

hey dez your are correct. i read his psot a bit wrong, my bad.
also i want to make an edit, forgtot to put in a whole part of a sentence:
what up bro? one fact and one opinion. fact: those fans(inline, exhaust) are desinged to pull air. dont get me wrong, they do work , for the most part, if you have the air pushing through. but they work much, much better and are more efficient when pulling. opinion: i have mine as such < FAN(on top outside of tent) < DUCTING <LIGHT <DUCTING <LIGHT <DUCTING hanging out of the other side of the tent, then i have it going into one of the other top duct holes sucking out moisture and heat from the ceiling of the tent, with an open vent at the bottom of the tent sucking in cool air from the floor. i think you might do a little better if you just take your ducting loose and turn your fan around. hope that helps bro.

kinda makes a difference in my description i guess, also if it gets a little warm i have my window a/c unit configured,and ducted to one of the side duct holes to blow in the cold air.

now as far as the filter issue, i dont need them. the NL doesnt really have a loud smell at all, thats why i chose it. didnt want to have to hassle with carbon filters when i started(may be reconsidering though). but maybe its the filter. cause where ever, or however your gonna have that filter positioned its going to be having air from inside the tent going through it, as it is now. so, i dont know maybe its the filter, maybe the "filter" needs to be turned around, maybe some one else near by has an op going.LOL. but that just my opinion on the filter, because i really have no experience with them. sorry. sorry Don G.


PEACE!!!
-ZEN-
 
You must log in or register to reply here.
Top