Hags
Well-Known Member
So why extract the dxm from the cough syrup? So you dont feel like shit and have a way betetr trip. Plus you can just parachute the stuff no nasty taste or anything.
Needed:
Tussin DM (ONLY with DXM only, no other ingredients! Guffensten?sp? is ok)
Plastic Ziplock Bags (Gallon Size)
40oz bottle with cap (had one laying around and works fine you can use any glass jar or closable bottle)
Clear Ammonia (Walmart has it for 97 cents for a jug)
Zippo Lighter Fluid (Walmart 2.47)
Scissors
Glass Pyrex Dish
Measuring cup with mL
Razor blade
Bowl or wide mouthed bottle
How:
Take the tussin and put it all in the empty and clean 40. Look at the tussin and see how many mL the bottle had. Measure out the same amount of the clear ammonia and add to the 40 as well. Shake this for 30 seconds. The overall volume (tussin in mL + ammonia in mL) now needs to by multiplied by .10 or 10%. Take that number and pour out the equivalent in lighter fluid and add to the 40 (so if your overall volume is 100mL (50mL tussin + 50mL ammonia), you should come up with 10mL of lighter fluid to add). Once added, close the bottle tight and shake shake shake for 5 min. When done shaking, add the entire contents of the bottle to a ziplock bag and hang it so that a bottom corner is facing straight down to the floor. After a few minutes you will notice a red layer and a thinner clear layer on top. The layers need to be completely bubble free, it should look like a mirror between the red and the clear layers, nothing there. Once bubble free carefully take the bag (still corner down) and hold it over the bowl. Snip a small hole in the corner of the bag and let the red stuff drain out. When the clear layer approaches let a little of the clear out and the pinch the corner right away. You dont want ANY red, it contains ammonia and you dont want that in your final product! Still pinching the corner of the bag, go to your pyrex dish and let all of the clear liquid out in to the dish.
Take the bowl with the red stuff or whatever you have it in and put it back into the 40. Add the same amount of lighter fluid again and repeat everything between 3-8 times depending on the amount of lighter fluid you have and patience. Repeating this with the same red liquid just gets more of the DXM out of the red stuff. So the more times you repeat the steps, the higher yield you will have.
When done pouring the clear liquid into the pyrex dish, stick that shit out side and hit it with a blow dryer. I did everything i could not to breathe this stuff in, so wear a mask of some sort or just leave it alone. The blow dryer just speeds up the evaporation. Depending on how you are evaporating the liquid, it usually takes me about an hour for all of the clear liquid to have evaporated and leave me with the dxm extract. Take your razor blade and scrape it all up. If it gooiey at all, its not done. This should be bone dry crystals. Do not snort or smoke! Only for ingestion. I usually bag mine up in gel caps and swallow them.
enjoi
Needed:
Tussin DM (ONLY with DXM only, no other ingredients! Guffensten?sp? is ok)
Plastic Ziplock Bags (Gallon Size)
40oz bottle with cap (had one laying around and works fine you can use any glass jar or closable bottle)
Clear Ammonia (Walmart has it for 97 cents for a jug)
Zippo Lighter Fluid (Walmart 2.47)
Scissors
Glass Pyrex Dish
Measuring cup with mL
Razor blade
Bowl or wide mouthed bottle
How:
Take the tussin and put it all in the empty and clean 40. Look at the tussin and see how many mL the bottle had. Measure out the same amount of the clear ammonia and add to the 40 as well. Shake this for 30 seconds. The overall volume (tussin in mL + ammonia in mL) now needs to by multiplied by .10 or 10%. Take that number and pour out the equivalent in lighter fluid and add to the 40 (so if your overall volume is 100mL (50mL tussin + 50mL ammonia), you should come up with 10mL of lighter fluid to add). Once added, close the bottle tight and shake shake shake for 5 min. When done shaking, add the entire contents of the bottle to a ziplock bag and hang it so that a bottom corner is facing straight down to the floor. After a few minutes you will notice a red layer and a thinner clear layer on top. The layers need to be completely bubble free, it should look like a mirror between the red and the clear layers, nothing there. Once bubble free carefully take the bag (still corner down) and hold it over the bowl. Snip a small hole in the corner of the bag and let the red stuff drain out. When the clear layer approaches let a little of the clear out and the pinch the corner right away. You dont want ANY red, it contains ammonia and you dont want that in your final product! Still pinching the corner of the bag, go to your pyrex dish and let all of the clear liquid out in to the dish.
Take the bowl with the red stuff or whatever you have it in and put it back into the 40. Add the same amount of lighter fluid again and repeat everything between 3-8 times depending on the amount of lighter fluid you have and patience. Repeating this with the same red liquid just gets more of the DXM out of the red stuff. So the more times you repeat the steps, the higher yield you will have.
When done pouring the clear liquid into the pyrex dish, stick that shit out side and hit it with a blow dryer. I did everything i could not to breathe this stuff in, so wear a mask of some sort or just leave it alone. The blow dryer just speeds up the evaporation. Depending on how you are evaporating the liquid, it usually takes me about an hour for all of the clear liquid to have evaporated and leave me with the dxm extract. Take your razor blade and scrape it all up. If it gooiey at all, its not done. This should be bone dry crystals. Do not snort or smoke! Only for ingestion. I usually bag mine up in gel caps and swallow them.
enjoi
