My first indoor grow! Hybrid recirculating DWC whatchamachalit w/ pics

[tonetone]

hey everyone,

the subject says it -- i have two 22 gallon storage totes each filled with 17.5 gallons of water = 35 gallons in my little contraption. there is a water pump that runs a 1/2" water out line inside of an 1-1/2" pvc line that i built. the pvc connects to the totes via a bulkhead that i improvised and the pump does not run constantly -- just for a half an hour every 2 hours to help move the nutrients around a little more. i have four small air stones in each reservoir that are powered by the smallest commercial air pump -- i might meander to the store and get 8 large air stones because that would really wreak havoc on those roots.

tone

 

[jesus of Cannabis]

looks good until you said you were selling them.

Give them away for free and spread the love.

and selling stuff on here is against the law without consent from RIU him/herself...................FYI

 

[tonetone]

i appreciate the heads up

 

[Weedler]

I would swap out to black air tubing when you get a chance moisture in your airline can cause algae to grow and clear tubing is easy breeding ground.

 

[Shafto]

Good looking start. I'd getthe power bar off the floor though. When there's water around it's always a good idea to keep power off the floor.

 

[Stay@homeGROWER]

very nice! I've been thinkin about trying a hydro/aero setup and upon my research DWC seems to be the complete package....

how many can you fit in one of those things. Is six the max, what if did a SOG with little veg time???

 

[watajob]

This grow is very similar to my first indoor grow. I had two totes. one had four pods with hydro rocks, and the other had six. The problem i found with this was spacing. The inability to get light to all of the plant, and the plants can't grow to their potential when being so close together. When its possible for an experienced grower to get the same yield as you out of two plants in each tote... maybe even more. This is great experience though. It taught me a ton. I noticed you said you put 17 gallons in each? I kept between 5-8 gallons just to make sure the pump was well covered. Then the pump dispersed the water to tubes which watered each pod. It worked well.

Im Subscribed.. I hope this works out for ya man.

Keep us updated

 

[tonetone]

thanks for the feedback! yeah it seems to be going pretty well -- before i built this i had a little aeroponic bucket that i had built that was growing them but obviously was not doing the trick. i think that after i get off work tomorrow or maybe during lunch ill run and get some black air tubing and move the power strip onto my little grow stand.

about the water level... currently i have 3-3/4" net pots (they seem heavier duty than the regular 3" and are cheaper than the 3" heavy duty net pots in my area) and i have the water level maybe 4" down from the top so the water is just barely in the bottoms of the pots. my question is -- how close does the water level need to be to the bottoms of the pots?

 

[tonetone]

hey home grower -- im really not sure how well this is going to work. i have a hunch they are going to be too cramped in here but what i am sort of aiming for right now is to find a few good mothers so in the future ill just need to cut new holes in some lids. the pots with the small straws are a strain i have been buying for awhile, the pot with the large straw is the widow and all the other ones are a jamaican/afghani mix. i hope to have some good progress within the next couple days!

 

[NorCalTransplant]

looks good until you said you were selling them.

Give them away for free and spread the love.

and selling stuff on here is against the law without consent from RIU him/herself...................FYI

How can selling something on a forum be "against the law"? Against forum rules, maybe, but agains the law? Hmmmm....

 

[tonetone]

it's no biggie i was just trying to offer a way to save some cash to some people -- an EZ Cloner at $300ish seems a litttle outrageous where i can make a 14 site and sell it for $80.

 

[watajob]

hey home grower -- im really not sure how well this is going to work. i have a hunch they are going to be too cramped in here but what i am sort of aiming for right now is to find a few good mothers so in the future ill just need to cut new holes in some lids. the pots with the small straws are a strain i have been buying for awhile, the pot with the large straw is the widow and all the other ones are a jamaican/afghani mix. i hope to have some good progress within the next couple days!

You will want your mother to be from soil

 

[tonetone]

oh why do you say that???

 

[BeaverHuntr]

it's no biggie i was just trying to offer a way to save some cash to some people -- an EZ Cloner at $300ish seems a litttle outrageous where i can make a 14 site and sell it for $80.

They sale them on craigslist, but start a thread or drop me a email with a link of your system so I could take a look in case I may want to buy one. And yes the EZ Cloner is mass expensive.

 

[Flo Grow]

oh why do you say that???

WORD ! Why is that ? That's like saying your bud should only be grown in soil too.

They sale them on craigslist, but start a thread or drop me a email with a link of your system so I could take a look in case I may want to buy one. And yes the EZ Cloner is mass expensive.

WORD on that too ! lol
Info please !

ToneTone,

Nice ass set up !
Very clean too !
PLUS REP !!!

I'd love to see something like this done with 2 coolers like mine or larger, like Boomers ! lol

 

[tonetone]

hey guys ill try to have something up in the next day or so with regards to my cloner. this coming saturday 12/4/10 i'll be doing my second round of nutrients. this previous saturday 11/27/10 i did 87.5 ml of flora micro, grow, and bloom. this coming saturday i plan to drain the system and then do 175 ml of flora micro, grow, and bloom.

 

[tonetone]

yeah flo grow i was actually thinking about using 5 gallon drinking coolers but just couldn't justify spending the money on them at the moment. as long as i run the pump only ever so often it doesn't generate enough heat to affect the water temperature. i initially was going to use the pump inline but i really just don't trust those barbed fittings that much lol.

my next design is going to be two rectangular coolers -- the excellent part about coolers is that their lids are about an 1" thick which means you can use a self-feed bit and make a counter-sunk insert for net pots.