1000w SCROG From Seed To Weed!! Multiple Strains!!!

[legallyflying]

I used 1" pvc and a roll of "bailing wire". I had both laying around so no big deal. There are pics in my journal. Nice thing about that is you can make whatever size holes you want. I think mine are around 2". If you don't glue the legs in, you can always come back later and change the height. Caution... hand cramp alert while stringing all that wire

 

[TheOrganic]

Nice advise legal thanks. I like that for changing the height. I imagine you cant adjust to much as it gets going but I was thinking about that how when I put my screen in and if I need to change it for the first part. Building the wood square around and laying screen would lock me in. I believe I will be going 2 Home depot to get pvc.

 

[TheOrganic]

30ish days old

Whooa man that took a long time to upload pics fucking boonies man! I pulled them out too get good pics.
First two pics are Sage.
The Sage is acting a little like some of my first grow with the undercupping. I think I was off on my PH and she was the one that didnt like it but I don't think its heat stress cause I am keeping her away from light more than others so will see. And tell me what you guys think I am no pro.

Second two pics are White Rhino

Third two pics are MK-Ultra, This pheno is a sativa dominate looking plant she is stretchy and growing like crazy I just tied her down to level her out.

Forth first pic is Kings Kush

And last two close up pics are Vanilla kush with my trusty old pipe.

Her are my stats, I was in the room for approx. 45min to go from 506ppm to 1455ppm just for some info. Temps are good and humidity isnt bad.
And also If anyone can help me with were exactly is the sensor part for my sentinel, If you look close there is a sensor like circle to the left of the photocell, Is that the sensor for everything or is the opening that I have a close up of for the temp. I just want to have it as close as I can too be even with tops so it is a accurate reading.
Goes in order 2pics Sage, 2pics White rhino, 2pics MK-Ultra, 1pic Kings Kush,3pics Vanilla kush.

 

[Kiki007]

Whooa man that took a long time to upload pics fucking boonies man! I pulled them out too get good pics.
First two pics are Sage.
The Sage is acting a little like some of my first grow with the undercupping. I think I was off on my PH and she was the one that didnt like it but I don't think its heat stress cause I am keeping her away from light more than others so will see. And tell me what you guys think I am no pro.

Second two pics are White Rhino

Third two pics are MK-Ultra, This pheno is a sativa dominate looking plant she is stretchy and growing like crazy I just tied her down to level her out.

Forth first pic is Kings Kush

And last two close up pics are Vanilla kush with my trusty old pipe.

Her are my stats, I was in the room for approx. 45min to go from 506ppm to 1455ppm just for some info. Temps are good and humidity isnt bad.
And also If anyone can help me with were exactly is the sensor part for my sentinel, If you look close there is a sensor like circle to the left of the photocell, Is that the sensor for everything or is the opening that I have a close up of for the temp. I just want to have it as close as I can too be even with tops so it is a accurate reading.
Goes in order 2pics Sage, 2pics White rhino, 2pics MK-Ultra, 1pic Kings Kush,3pics Vanilla kush.[/QUOT

TO - looking awesome!!

 

[legallyflying]

the sensor for temp, humidty, and CO2 should be in the part of the controller that has some ventilation slats in it. Looking good man!

I would try to get that king kush to even out a little more. How much space left to grow do you have? Are you going to veg for a couple weeks longer? I would if you have the time. I ran three different strains last time and they stretched ALLOT during the first 7 days then really started to slow down. I flipped as soon as they hit the screen, I think it was a little early, this time I am doing some more pre-flip training, and jsut letting them go from day 5 on.

 

[TheOrganic]

Thanks for the input on sensor wasn't for sure. I have quite a bit of space yet. I'm not setting a specific time on how long to veg.I wanna go almost 2months so they are nice and mature but will see. And yes the kings kush has two lower branches starting to shoot out but are slowing down. The MK ultra is the one outta control I tied it down real good before pics there are prob 10diff tops going. I will take some more pics when the start to shoot out of their LST. Thanks for the advice its my first scrog so I'm anticipating when to lay screen.

 

[legallyflying]

Sounds good. Don't really know soil time frames. Once my clones get about that size they simple explode. Every time I open the tent they are bigger. Its pretty amazing really so much that I have to take steps to slow them down as I take cutting one week into flowering. For only a month from seed they are looking pretty money. I would bet that grwoth rates will increase from here on out.

How much grow height do you have? (total height - (height of pots + height of hood and hanger + minimum distance from lights) ?

 

[TheOrganic]

Nice Id imagine doing hydro is perfect for fast growth. My height from top of pots to ceiling is 6ft, And my hood is 7in deep.

When I kick into flower with 1000w It will be colder then really cold so hopefully the air sucking from other room in basement will help cool that sucker down and let me run as close as possible. I do have a quantum dimmable ballast also so if the 1000w gets too much in the end I can kick it down.

 

[frogster]

Subscribed.. +rep .... Looking good.. We started our clones out roughly at the same time. ( I have a few late ones).. I have a few plants I may need to start bending over,,, A few others have nodes so close its ridicules.. I will keep track of your grow...

 

[TheOrganic]

Frogster
I started from seed. That's good too have those short nodes. All but MK-Ultra And Sage(funny that both are TH-SEEDS) are wanting too stay short. But thats the beauty of scrog to manipulate that just need too get screen in pretty soon(4-5days) I bought some chicken wire and the square's are 1x2 I've seen screens like this so It should be good.

 

[TheOrganic]

I spilled some nutes on low fan leaves couple weeks ago and are really showing but Iám not worried. Those will be cut off later anyway after screen I believe or should I keep them and pull them up screen when time comes?
The MK-ultra busted a side from LST but I think it will b oK.
Also that damn SAGE is undercupping more on the older fan leaves but new growth is good. That shit is haunting me from first grow almost all fan leaves(except a few) and some big bud leaves were doing that.
I heard this is a PH thing and possible heat so this is kinda what Iám leaning on, I have a hanna ph meter that is calibrated now, damn assholes send me the meter and says its calibrated and it was off by a lot(had to get the 4.01 and 7.01 packs).
But anyway here's some pics I was bored after work so thought what the hell.

 

[Kiki007]

I spilled some nutes on low fan leaves couple weeks ago and are really showing but Iám not worried. Those will be cut off later anyway after screen I believe or should I keep them and pull them up screen when time comes?
The MK-ultra busted a side from LST but I think it will b oK.
Also that damn SAGE is undercupping more on the older fan leaves but new growth is good. That shit is haunting me from first grow almost all fan leaves(except a few) and some big bud leaves were doing that.
I heard this is a PH thing and possible heat so this is kinda what Iám leaning on, I have a hanna ph meter that is calibrated now, damn assholes send me the meter and says its calibrated and it was off by a lot(had to get the 4.01 and 7.01 packs).
But anyway here's some pics I was bored after work so thought what the hell.

TO - are you sure that's spilled nutes?? looks suspicious to me.. everything else looks awesome... you are coming along great!

 

[TheOrganic]

I believe it some spray from my Mayan(humboldt) those leaves were touching soil before, I watered tonight and was very careful. Nutes were ph'd at 6.5. Awhile back I discovered that Equilibrium is very High in PH so my run off was 7.15.
Hope this helps And all feed back is welcomed this is my 2nd indoor.
P.S.
Oh ya I read that thread On THCfarmer and Hygrozyme sounds like some good stuff. Guy on their really did his tests with it and with others good read thanks GoldenGanja and KIKI.

 

[Kiki007]

I believe it some spray from my Mayan(humboldt) those leaves were touching soil before, I watered tonight and was very careful. Nutes were ph'd at 6.5. Awhile back I discovered that Equilibrium is very High in PH so my run off was 7.15.
Hope this helps And all feed back is welcomed this is my 2nd indoor.
P.S.
Oh ya I read that thread On THCfarmer and Hygrozyme sounds like some good stuff. Guy on their really did his tests with it and with others good read thanks GoldenGanja and KIKI.

yes he did - I won't grow without hygrozyme! It's that awesome for a newbie like me.... keeps me from f***king up the plants.

 

[legallyflying]

Man, that 1k looks AWFUL close to those plants..

 

[TheOrganic]

Man, that 1k looks AWFUL close to those plants..

OH its still under 400 and I did raise a bit since that pic.

 

[legallyflying]

Phew. I was like damn dude... 1,000 watts like 8" away... How are those plants not extra crispy?

I got a light mover for my 39th birthday. . Installed it in my veg tent. Pretty pimp!

 

[TheOrganic]

No cripy just on a few leaves at bottom were mayan spilled on. I did a little test too on a real small leaf on bottom by putting a drop of mayan on it made the same look.

I'm gonna throw screen in tonight. I was gonna use your Idea with PVC but I just so pressed for time I gotta use wood.
I measured about a 1 foot from top of bucket to top of screen. Hope it will work.

 

[legallyflying]

That should work just fine. I need to exand by screen for the upcoming plants. 5 more this time around

 

[Kiki007]

TO - updated pics.... ?? come on man we're all on the edge of out seats! Also - I want to see what your Greenhouse King's Kush is going to do throughout this grow.!