Twisted leaves? pics +rep

Thor1911

Well-Known Member
Just going to get straight to the point
12292010500.jpg
Nute def? over nute?

Recipe for success to the drop, and 10ml of aquasheild per gal
Day 11 flower
Tap water(set out for 48hr), dwc
PH 5.8-5.9
temps -> 74-76
Sorry pictures from phone
12292010499.jpg
Those two branches that were coming up just died. Heat stress? The top of the plant is about 8in underneath a 600, the top is fine tho the new shoots just died (Boron def?). They look burnt almost.

I think I have a little boron def. The pic at the top is my lemon skunk, on bottom my ak47. Both showing def signs of b

anyone to confirm?
 
8 inches fromt he canopy with a 600w is BAD my man. You want a good 15-25 inches away from the lamp. I would suggest you move it about 18 inches from the canopy and wait a week to see any results. Happy Growing.
 

Thor1911

Well-Known Member
its 76 degrees at the top of the canopy. I have it cooled fairly well, I don't believe its a heat related problem.
 

DankShasta

Active Member
its 76 degrees at the top of the canopy. I have it cooled fairly well, I don't believe its a heat related problem.

One thing though, and this is minor. You say your Canopy is 76, but in those photos the serrated edged, tips of your leaves definetly show high heat. See how the little tips are all bending up? Maybe you have some hot spots? I normally use 600s, and I've been at 8-10 inches without problems, but i would say your plant is transpiring a little too much for some reason. Not a big deal, but I'd think about it.

Also for the 15-25 inches ??? From the canopy? With a 600? That's way too far away. I'd rather deal with cooling at 8 inches than lose 80% of my PAR value, lol.
 
Also for the 15-25 inches ??? From the canopy? With a 600? That's way too far away. I'd rather deal with cooling at 8 inches than lose 80% of my PAR value, lol.[/QUOTE]

Ooops, I ment 10-15 inches. Depends on what style of light, ventaltion and air movement. Could always use the hand method to.
 

Thor1911

Well-Known Member
Just readjusted the ph of the buckets, they were at 5.4-5.5.
One of the plants was at 5.9, but all others were pretty low.

I'm going through a battle against powder mildew right now, its not to bad I've just been able to sustain it down. Thinking about buying a sulfur burner just to take care of it
 
Top