all i can say is your truly stupid. Did you not look at the pics on the drying rack? do they look like they have leaves dumbass? sorry you dont know how to grow mr 20 posts.
Hydroponics
- Thread starter potroast
- Start date
phxfire
New Member
ONCE AGAIN YOU MEASURE ONES ABILITY TO GROW BECAUSE OF HOW MANY POSTS ONE HAS MADE ON THIS FORUM.... KID GROW UP.... YOU ARE LIVING IN YOUR PARENTS BASEMENT... JUST STOP... I DONT CARE... YOUR POST WAS A LIE... I DONT LIE... 28 oz off of one 3ft tall plant... IN-FUCKING-POSSIBLE
MR.28oz a plantwatts131313
Member
you can get 28 oz off a plant that is only 3 to 4 feet tall, it just has to be one wide big mother fucker.....not sayin he's speaking the truth but it def is possible, just a long veg time and basically just growin max 5 plants or got a huge fuckin garage all for ur ladies. with min. 4 600s for flower and a t5 or two to veg the clones. i dont use metal halide cause it simply isnt needed when ur growin this way, cause this way you have a hundred tops to every plant. im not speakin from expierence sayin i get 28 oz off a plant. but i know it is possible. but u really gotta have apoint to prove to get it haha
heres a pic of my little shithole right now, im plannin on completley changin my setup after this harvest. i just relocated so this is a rooom that got put together in an hr. kinds are pineapple express, aurora indica, and raspberry cough.
heres a pic of my little shithole right now, im plannin on completley changin my setup after this harvest. i just relocated so this is a rooom that got put together in an hr. kinds are pineapple express, aurora indica, and raspberry cough.
RyaNayR
Well-Known Member
I am using a drip system (aerogarden) to grow some seedlings that i germinated in soil... Do i need to be turning the pump off in cycles or running it 24/7? after leaving the pump off accidentally over night they suddenly grew a few new roots for the first time since being in the aerogarden... but until now none have grown new roots and now they have all grown new roots at once... also, i am using the Recipe for Success starter kit nutrients from Technaflora (makers of B.C Grow, B.C Bloom, etc) and have applied the recommended nutrients for the veg stage, but then quickly flushed that out and decided to just stick to the nutes recommended for the transplant stage, as instructed by the sheet in the kit, because i have removed them from soil and into water, thus that's a transplant. two of the sprouts are curling their leaves under like an m shape (first set of leaves after seed-leaves) but another is turning yellow...i have been using Root66 rooting mixture as part of the regimen recommended by the kit... as well as the SugarDaddy and ThriveAlive-B1 Green...
I used 2 tsps of Root66, 2 tsps SugarDaddy, 1 Tsp ThriveAlive-B1 Green.. or actually a little bit less of each than that...
I used 2 tsps of Root66, 2 tsps SugarDaddy, 1 Tsp ThriveAlive-B1 Green.. or actually a little bit less of each than that...
I'm guessing this has been answered multiple times, but after lots of searching I still haven't found any conclusive answer.
I'm soon starting my first grow, and I'm thinking about setting up a 1m x 1m x 2m tent, containing two DWC's put under a ScrOG. I'm wondering what kind of lighting that would be suitable for such a setup. My plan so far is to use 2x 250W CFL (25.000 Kelvin). Would this work, and compared to other solutions how good?
The reason for using CFL is mostly cost, combined with less required know-how of more complex technical solutions. I know a HID wouldn't be too much work, but the ballast is a turn off.
I'm soon starting my first grow, and I'm thinking about setting up a 1m x 1m x 2m tent, containing two DWC's put under a ScrOG. I'm wondering what kind of lighting that would be suitable for such a setup. My plan so far is to use 2x 250W CFL (25.000 Kelvin). Would this work, and compared to other solutions how good?
The reason for using CFL is mostly cost, combined with less required know-how of more complex technical solutions. I know a HID wouldn't be too much work, but the ballast is a turn off.
doniawon
Well-Known Member
cgrizzle your putting your 28 oz. plant on every thread. by now nobody gives a fuck. you had your own thread and that was cool, but this is too much. congrats on a 28 oz plant that was vegged forever and had 1.5 kw on it. your g/watt was still probably under .5 g per watt. so what do you want.. and what was your confirmed dry weight.. bet youll never tell.
teddiekgb123
Well-Known Member
Sure it will work......but how well. I would get a 400w switchable light. You can't beat HID light intensity.
jasonam1987
Member
my 6 gydro plants im growing stopped growing after 1 week of being transplanted for dirt as a seedling to the hydro system...on the other hand the other 4 plants i left in the dirt are still growing considerably bigger. Can the stunted growth be due to shock there has been no neg or pos effects from the transplant? im using 15 gallon tank with all florcare products.
jason1976
Well-Known Member
my set up is as follows. 1 5 gallon bucket , airstone 160 gph pump,8 micromister heads, 4 cfl 150 watt sunlight bulbs, soon to be 8. i have started using humbolt oneness, pretty easy stuff, i leave my misters and bubble stone on 24-7. any advice for me? like nutes should i use other nutes with oneness? i have a digital ph tester and buffering solutions, also general hydroponics up and down that i regulate ph with twice a day. i used rockwool in hydroton as medium. my seedlings now im usung new stuff as a medium. it white poly ...
LetsGetLifted
Member
Hey guys first time hydro grower. I was just wondering what is the most efficient way to change out your water every week or so?
BoomerBloomer57
Well-Known Member
Easy fill and drain adaptors. Connect the hose and drain. Refill from the main res of 100 gallons
of mixed r/o and tap.
Super easy.
of mixed r/o and tap.
Super easy.
Attachments
killacreepz
Member
my cf is going up from 4 to 6 by the next day?? ive got an nft system, its a small system like less than a foot long, i have 4 plants in their, and 3 r healthy but 1 isnt as healthy. iv tried everthing from washing out whole system with ph water incase of salt build up on spreader mat. ive thrown 40 litres of ph'd water over plants spreader mat and roots and system. ive even left it running with just water no nutes. i c that 3 of my plants r ok but 1 looks deficient with drying up lower leaves, but the top leaves r healthy on the unhealthy looking 1, im not sure if the roots are root bound, even though there are roots from the same plant growing down the tray and at the sides of the rockwool slab. ph goes up also daily to more alkaline and cf rises daily also. any suggestions thankyou.
talk2sampson
Member
completely new to hydro. what nutrients should i feed clones that are about a week old? i dont want to burn everything up or lock it up. any advice would be greatly appreciated!
doniawon
Well-Known Member
none or 1/4 strength none if u see no roots. u hydro cloneing?
talk2sampson
Member
I am using a 24 site ebb n grow, all roots showing in rockwool before transfered. roots have taken im asuming its been a week since ive put them in there. Thanks for the fast response doni!
doniawon
Well-Known Member
set your ppms to 800. . set your controller to water 3 times a day they may look weak for a day or so but everthing will work out.
Master Yoda420
Active Member
Can anyone give me some advice ? It's my first hydro set-up...I've been flowering my Kush plant for 4 weeks and the buds look ready already(!!)...it's supposed to take 9 weeks according to Green House Seeds. Is it possible its much faster in hydro ??? Could they be ready...they are 50-80% red/orange trichcombs.
Any advice?
Any advice?
ShoAL paTroL
Well-Known Member
There not done.u gota let them go at least 4 1/2 more weeks. Don't forget to flush