hellraizer30
Rebel From The North
mine is kinda at a angle
Here you go: http://www.aquahub.com/store/product39.html I am building a custom bucket system using 3 of these that I will be posting on the board soon.My advice is to build a better controller like the aquahub. The constant drain pump dry heaving to maintain water level with the cap is annoying.
So how big of a problem is this and is there anything you can do to prevent it in the first place? If it does happen how do you trim the roots?this does happen, its up to you on removing the roots clogging the hole.
I got the kit this week. It looks promising.Here you go: http://www.aquahub.com/store/product39.html I am building a custom bucket system using 3 of these that I will be posting on the board soon.
i'm scanning through page after page can't seem to find the info i'm looking for
i'd like to know, what's the maximum number of bucket sites this system could support?
if i were to purchase lots of 6 sites extensions, would i be able to expand the cap n gro into a 80 bucket system?
perhaps even a 100 bucket system? and would i need to switch to a bigger reservior at same point?
k thx
You could run as many as you could fit on a your rez which could be 10,000 gals if you needed and you would have some serious pipe running between the buckets. Run as many as you want the only thing is you do want some reserve left in your rez, how fast you can fill your system (wont do you much good if it takes an hour to fill it). I am running 3/4 hose between my buckets just for added flow. RW for all your medium or just clones?I run 75 on a 95 gallon rez and it is still half full + some left at end of flood.
I use rw if that makes a diff.
Just take your time its pretty fool proof. I did however extend the float switch wires so I could mount it on the wall not on the bucket.I got the kit this week. It looks promising.
I like the idea of moveing the timer box off the bucket, no more bending over to see the timer!! thats my next upgrade thanks for the great idea +repJust take your time its pretty fool proof. I did however extend the float switch wires so I could mount it on the wall not on the bucket.
Yup one of the main reasons I wanted to build my own.Just take your time its pretty fool proof. I did however extend the float switch wires so I could mount it on the wall not on the bucket.
So 40min round trip?takes about 20 min to fill using 1/2" hose
I had 29 and in the last 4 weeks they were taking 30 gals a day, so your right! I wouldnt go over 30 with a 55gal resRoots in the line: Make sure the line connected to the pot is at least 18" long before the "T". Roots in the line are not a problem as long as they do not get to the T. That will clog the other plants along the line.
Expansion Packs: More than 48 pots is difficult to operate properly. The pot system fills and drains too slow, plus the reservior level would drop too fast. When the plants are in full growth mode they'll drink 20 gallons (48 plants) a day so 55 gallons just isn't enough.
8-10 pots in a 5'x10' area under 2k lights is PERFECT. Veg for 2-3 weeks and you'll get 3-3½ lbs yield (GH or AN nutes).