Secret Jardin Darkroom Club

bajafox

bajafox

Well-Known Member
Maybe you can saw off about 3 inches on all 8 poles that go in each corner, that way you reduce it by 6 inches. Just be careful and do it on the ends that go in the corner sockets, not where the poles connect in the middle
 
Henry Brown

Henry Brown

Member
Hmmmm that's a good idea, I MIGHT do that...plus rep.

I was wondering though, if I was to get the DR90 ll, will a 1000 watt benefit over a 600 watt in such a small tent?
 
D

durbanmistyman

Well-Known Member
yea your plants would benefit from the 1k vs the 600 more lumen = more growth. the problem is are you going to be able to keep your temps down in that small of a tent and the 1k is going to be sucking a lot more electricity.
 
C

cheeze me

Well-Known Member
Im looking to buy either dr 60 or 90, could i get away with 600w in the dr60? Room temps where tent is stay around 12-15c
 
Henry Brown

Henry Brown

Member
Alright looks like I'm getting the 600 watt. One question, does the tent come with a pulley system to raise and lower the light? If not, where would I find a nice cheap one? Thanks in advance.
 
S

str8og

Member
hey his tread is great i've been looking for something like this. i have a dr-120 and a dr-80 and i am looking for a way where thay can be connected for air flow, exhaust. i was thinking about putting 1.(6) inch in-line boost fan pulling air from my basement into thr dr-80 which i will be doing veg w/ 1. (4) blub T-5 and a (6) inch oscillating fan. next step there will be another (6) inch in-line boost fan pulling air from the veg tent unto the dr-120 where i will be doing flowering using 2. sun systems 150 watt hps lighting systems, 1. (6) inch can fan max (334 cfm), and 1. can carbon filter. TELL ME WHAT YOU THINK AND IF IT WOULD WORK PLEASE LET ME KNOW.
 
genuineapbts

genuineapbts

Active Member
I am wondering if anyone here has a Secret Jardin Twin? I am really considering buying one of these. I am just worried that it will not be big enough. I would like to run a 12 plant hydro setup. Any input on what size darkrrom and lighting would be great.

Thanks So Much!
 
N

Nash11

Active Member
I figure this can be a good thread to post my first post. Great site btw.

I'm looking at the DR90II. Repeating what already has been posted before the rough dimensions are 3'x3'x6'. I'm thinking about going the 600W route but can't help but wonder if that would be too much. 400W seems ideal but having a 600W helps facilitate a possible future upgrade.

Thoughts?
 
Lt. Dan

Lt. Dan

Well-Known Member
Welcome Nash11,

I'm a bit new to all this but, this is what the web page where I got my lights from said.
400 watt = 2'x2' to 3'x3'
600 watt = 3'x3' to 4'x4'
1000watt = 4'x4' to 5'x5'

Cheers and Happy Growing,
 
daz321

daz321

Active Member
hi everyone, just changed from a dr60 to a dr100 i am running 2x 600w cooltubes more watts the better , 1x 4" fan for extraction and a passive intake, temps stay at 80-82f
 
Griffta

Griffta

Active Member
Hello peeps, great thread.
I've got a dr60 II & I'm a week into my first grow. Love the jardin but thing is I haven't set up my ventilation & odour control yet (and this is important as I live in an apt)
I'd like to ask you lot if a 100mm TD silent fan with a C.Filter would be enough for extraction & smell? As mentioned earlier in the thread there's not much room in these tents, so I was gonna have the fan & filter on top of the tent and obv connected to the tent with accoustic ducting fed into the vent hole on the top of the tent. Would this work ok?
And sorry to be a noob but what fans would you recommend for inlet?
I'm running an LED in there and I've just got an oscilating fan outside the tent, which is blowing through the open panel at the bottom.
the temps stay around 77-80 as it is now but I want to put a little clip on fan inside the tent so I can close the panels and have it lightproof (or at least almost lightproof)
Many thanks & muchos +rep for help with my noobness
 
nas2007

nas2007

Well-Known Member
HI to all tent growers and nice to see this thred growing, i see alot of tent growers having to water they plants in the tents one by one and then taking the run off water out, i know sounds eazy if you got 1 or 2 plants, butt if your growing something like 6+ plants it is quit alot of work specialy if your growing in coco whre you have to water like nearly every day, now if you have a good run to drain set up please do share your system i wud love to know if other tent growers have come up with some good adeas!!!
 
teryy

teryy

Active Member
Long time no post...my bad. well im back. just got a 1000 watt for my growlab 120, air cooled hood pasive intake filter fan so on. got a portable a/c just for my babys.. i have panda film covering my window with holes cut out for the tent snd a/cs hot air. temps in tent with light, fan and a/c on where 71-78 for my 8 hour test. problem is the panda film is puffing up with air due to the blinds blocking it from freely flowing. im in an townhouse type apt, so im up and downstairs. but still wanna be lowkey. how can i fix this? dont want people to see the vents. any stealh window tips? reps to everyone for keeping my thread around..
 
endogarden

endogarden

New Member
nas2007 said:
HI to all tent growers and nice to see this thred growing, i see alot of tent growers having to water they plants in the tents one by one and then taking the run off water out, i know sounds eazy if you got 1 or 2 plants, butt if your growing something like 6+ plants it is quit alot of work specialy if your growing in coco whre you have to water like nearly every day, now if you have a good run to drain set up please do share your system i wud love to know if other tent growers have come up with some good adeas!!!
Click to expand...
I am using a Secret Jardin DR II 240 (8'x8'x6.7') for flowering.
I have (3) 3.5'x3.5' flood tables sitting 5" above the floor on wooden blocks.
I have 3 27 gal tote/rubbermaid rezs stacked on moulded plastic stackable shelving from Home Depot.
I have a Shop Vac with built in water pump, specifically made for emptying flooded basements, etc. I use it to empty the trays, I have 1/2" black plastic hosing attached going through a (dry)wall and draining into a manifold I fashioned under the sink.

This works pretty well for me currently, but I don't like running to waste, so I am going to fashion a "ebb & grow" style control bucket for use with my 3 flood tables, to be used similar to the way the "ebb & grow" buckets are utilized.

I strongly recommend having a Shop Vac w/ a built in pump, it's unbelievably convenient to be able to remove any liquid to a drain easily. Never carrying buckets of anything anywhere.
 
You must log in or register to reply here.
Top