Gastanker
Well-Known Member
I'm not familiar with that fan but as long as it is able to pull/push through the filter you should be golden. Small tents really don't need huge fans - I run a 4x4 with a 1kW light and my 440 cfm fan running at 1/4 speed. Most 100+ CFM fans should be sufficient. The best way to configure is pulling through the filter so if you can mount your filter inside the tent it would be ideal, your fan could still be mounted outside the tent. It is possible to have it all on the outside and push through the filter - I've done this with success but it is not as ideal.Hello peeps, great thread.
I've got a dr60 II & I'm a week into my first grow. Love the jardin but thing is I haven't set up my ventilation & odour control yet (and this is important as I live in an apt)
I'd like to ask you lot if a 100mm TD silent fan with a C.Filter would be enough for extraction & smell? As mentioned earlier in the thread there's not much room in these tents, so I was gonna have the fan & filter on top of the tent and obv connected to the tent with accoustic ducting fed into the vent hole on the top of the tent. Would this work ok?
And sorry to be a noob but what fans would you recommend for inlet?
I'm running an LED in there and I've just got an oscilating fan outside the tent, which is blowing through the open panel at the bottom.
the temps stay around 77-80 as it is now but I want to put a little clip on fan inside the tent so I can close the panels and have it lightproof (or at least almost lightproof)
Many thanks & muchos +rep for help with my noobness