Light Movers?
- Thread starter Coors
- Start date
KuLong
Well-Known Member
Need more data.
Dominathan
Well-Known Member
They use a lot less power, considering one moving light can replace 4 stationary ones in a nice grow room! Go for the movers man!
KuLong
Well-Known Member
I know what a light mover is. Was that sarcasm?
The data needed from you (for example):
Size of a grow room. Answered.
Other data that would be useful would be information on your light set up.
If you have 2 400/600w HPS lights, then no, you would not need a light mover.
If you have one 1000w HPS in a room that size, then no, you would not need a light mover.
If you have one 250/400/600w HPS, then yes, a light mover would be ideal in that grow space.
cannabis420420
Well-Known Member
instead of a light mover how about buying another light 
KuLong
Well-Known Member
As mentioned above by dominathan, less power. Which of course would cut down on overhead.instead of a light mover how about buying another light
hellraizer30
Rebel From The North
I agree! and if your using it to span a large area you wont be happy with what you get.instead of a light mover how about buying another light
the price on a mover is almost the same as a ballast.
Dominathan
Well-Known Member
I like it when my name gets said.
Thanks!! I was not trying to be sarcastic, just a bad stoned joke.
you think 1 x 1000 hps is enough for that space? I was going to go with 2 x 1000. As far as my light supply goes I already have more lights than I know what to do with. currently I have 2x 400MH, 2x 600HPS, and 2x 1000HPS. Everything that I've seen says that a 1000 will cover about a 5x5 foot area. so I figure 2 would cover a 10x5. or be a little over kill for a 9x4.
what are some advantages to a light mover?
SCARHOLE
Well-Known Member
Hobbes got 2.4 g per watt using a light mover.
INCREDIBLE
I believe he said that they did better than the plants under another light......
INCREDIBLE
I believe he said that they did better than the plants under another light......
.
"I'm growing hydro in a closet roughly 2x8ft."
One 600 watt and a light mover. I'd go for the 5.0 over the 3.5 Light Rail just for the more powerful/resilient motor, and the slower moving motor. Here's my 8'x3' grow cage, 600W and a light rail.
I find that marijuana grows better with a moving light source rather than a stationary one, both to get the plant from different angles (get areas normally in shadow) and to give the light receptors on the plant a rest - plants don't normally get 12 hours of direct, constant light, especially from the same source. My yield is well above 1 gram per watt with this system.
http://www.lightrail3.com/garden/LR5.php
Pics of my garden: SSD, KM, BG, BL, T, Flo, RD
.
"I'm growing hydro in a closet roughly 2x8ft."
One 600 watt and a light mover. I'd go for the 5.0 over the 3.5 Light Rail just for the more powerful/resilient motor, and the slower moving motor. Here's my 8'x3' grow cage, 600W and a light rail.
I find that marijuana grows better with a moving light source rather than a stationary one, both to get the plant from different angles (get areas normally in shadow) and to give the light receptors on the plant a rest - plants don't normally get 12 hours of direct, constant light, especially from the same source. My yield is well above 1 gram per watt with this system.
http://www.lightrail3.com/garden/LR5.php
Pics of my garden: SSD, KM, BG, BL, T, Flo, RD
.
KuLong
Well-Known Member
If you are going to put 2x 1000w in your space, I would put just one 1000w on a light mover.
Would cut down on overhead cost (as mentioned before) and cut down on heat accumulation.
[FONT="]so worth the money because, when you move your light you can reach all the leaves instead of just the top ones and since the light moves the hot spots no longer exists therefor you can run the light closer to the plants getting a better use of your wattage which results in better yields. [/FONT]
JohnnySocko
Active Member
I've read a couple threads on em and the arguments make sense from a mathematical P.O.V: heat, electricity, even canopy.... I think someone had 2ea 600's in a 4x8 and was kicking ass with it; again pardon me if I can't recall the thread or exact specifics