How did "YOU" build your hydroponics system??
- Thread starter dopeyG
- Start date
BendBrewer
Well-Known Member
I bought some buckets, totes, hose, clamps, fittings and pumps and went to town.
BendBrewer
Well-Known Member
Not complicated at all. I pump water out of the reservoir to the top of the buckets and let gravity do the rest.
BendBrewer
Well-Known Member
Just a submersible pump like for a pond. Mine is 600+ GPH but I don't run it at full bore. (maybe it is 300+ not sure)
Something like this:
http://www.google.com/products/catalog?q=submersible+pump&hl=en&safe=off&prmd=ivnsr&bav=on.2,or.r_gc.r_pw.&biw=1042&bih=823&um=1&ie=UTF-8&tbm=shop&cid=7746747894634133078&sa=X&ei=dqskTujQBofiiAKxp932CQ&ved=0CJkBEPMCMAQ
Something like this:
http://www.google.com/products/catalog?q=submersible+pump&hl=en&safe=off&prmd=ivnsr&bav=on.2,or.r_gc.r_pw.&biw=1042&bih=823&um=1&ie=UTF-8&tbm=shop&cid=7746747894634133078&sa=X&ei=dqskTujQBofiiAKxp932CQ&ved=0CJkBEPMCMAQ
BendBrewer
Well-Known Member
Beer 30 for me so don't think I am ignoring you. More than happy to help with builds. That's my gig. Shoot me a PM if I don't check in tomorrow.
I forget were I post most of the time.
I forget were I post most of the time.
dopeyG
Well-Known Member
lol ya i'm the same. it says on your profile if u ever go there. It must be especially hard after 30 beer lol. Those pumps are pretty cheap eh? i have yet to move into my house yet but when i do i will be starting for sure. i just had to chop down my 4 plant crop because my gf didnt want to drive 15 hours with them in the trunk of her car, thinking we would get pulled over so i had to detroy them. i'm kinda glad tho because these hydors interest me. does hydro grow faster??? than soil i mean.
dr herbal
Member
dwc is the best hydro by far if you ask me so simple and the results speak for them selves (do dwc search loads results) all you ned is a bucket with lid (i use brewers 30ltr buckets) cut a 5in hole in the middle put in 5in net pot full of clay pebbles.....put water in the bucket add air stone and place an air pump above the water line(stop water flowing into the pump) you dont need big air pump really but more air bigger and quicker you plants will grow in gen anyway lol just remember the biger the root zone gets the more oxygen the more the rootzone require`s
another good thing with dwc is you can move the plans as n when needed so in theory more plants in your space if wanted
the down side is changing all the buckets dose get too become anoying checking ph/cf on every bucket insted one rez so could do what bend brewer dose and make it an rdwc but then the pots are more or less set where they are but there good n bad too every method mate
hope that helps mate
another good thing with dwc is you can move the plans as n when needed so in theory more plants in your space if wanted
the down side is changing all the buckets dose get too become anoying checking ph/cf on every bucket insted one rez so could do what bend brewer dose and make it an rdwc but then the pots are more or less set where they are but there good n bad too every method mate
hope that helps mate
pazuzu420
Well-Known Member
I've created a two cabinets now, one for flowering and one for vegging. Each has it's own external rez with valves sets that let me pump them out with the same pump that I use to power each system. Both systems are low pressure aeroponic systems and seem to be producing quite well. The cloner/veg just explodes roots in 7-10 days and then proceeds to do so throughout the veg cycle. I spent many many an hour researching systems and then implimented pieces from each to come up with the final product. I say final but I've already got my eye on a new tote that will maximize the grow area that I plan on purchasing and having ready to install right after harvest so I can move stuff from the veg cabinet over.
I think a few of the major advatages are how easy it is to monitor the rez, how easy it to empty and clean the rez, everything is designed to tear down to be cleaned (only important places are glued up), When I stack a bunch of totes on the bottom rez it looks exactly like that a stack of totes. I've placed them close enough that with a little black pipe insulation in the kinda dark room and you just don't notice the plumbing. There are quite a few pics in the threads contained in my sig. Here is a general shot....
It is not 
usually backlit I did it for effect ..this is before I put in the exhaust and veg cabinet.
I think a few of the major advatages are how easy it is to monitor the rez, how easy it to empty and clean the rez, everything is designed to tear down to be cleaned (only important places are glued up), When I stack a bunch of totes on the bottom rez it looks exactly like that a stack of totes. I've placed them close enough that with a little black pipe insulation in the kinda dark room and you just don't notice the plumbing. There are quite a few pics in the threads contained in my sig. Here is a general shot....
It is not usually backlit I did it for effect ..this is before I put in the exhaust and veg cabinet.
Devildog93
Well-Known Member
Don't have pics of my old setup. But it went as follows.
18' X 16' X 8' room (IIRC)
8-1000W HPS lights w/GroStar reflectors + ballasts
4-4X8 flood/drain tables 45 plants per table
2-45 gallon reservoirs
4-submersible pumps 2 in each res for redundancy in case of failure (can't remember brand name or GPM) Both pumps in each res were tied into the plumbing. If one failed, then the other one could pump. If both failed, I was out of luck I guess.....never happened though.
Each res fed two tables. It was not a full automatic setup, I would go down and check them, then turn on pumps as needed
I had two drain holes and return plumbing in each table, and would simply pull plugs (8 in all) when the tables filled. The plugs were in the far end of each table and the rockwool was cut out at that spot to be able to plug/unplug the drainholes.
For the medium, I used 6X12 Rockwool slabs, with side plastic removed, and filled each table completely like a jigsaw puzzle, cutting them to fit if needed, like insulating a wall.
So, each table was basically a giant rockwool slab. I then took white/black poly plastic and laid it across each table, then drew cross lines. At each cross point I would cut an X then place a plant there.
I put the poly in (white side up) to both shield the root zone from light/heat, and to also keep a decent humidity in the root zone. Never once did it dry out. The massive amounts of rockwool allowed for huge roots from all the plants. I would have to cut the rockwool slabs apart after harvest in order to dispose of them.
No CO2 added, only constant venting thru 8"Vortex and carbon filter, and nothing but GH nutes and tap water and pH down.
I yielded HUGE off that setup. It was as perfect as I could ever imagine , despite the fact it wasnt quite fully automatic with the feeding regimen ( and other than the electricity bill).
18' X 16' X 8' room (IIRC)
8-1000W HPS lights w/GroStar reflectors + ballasts
4-4X8 flood/drain tables 45 plants per table
2-45 gallon reservoirs
4-submersible pumps 2 in each res for redundancy in case of failure (can't remember brand name or GPM) Both pumps in each res were tied into the plumbing. If one failed, then the other one could pump. If both failed, I was out of luck I guess.....never happened though.
Each res fed two tables. It was not a full automatic setup, I would go down and check them, then turn on pumps as needed
I had two drain holes and return plumbing in each table, and would simply pull plugs (8 in all) when the tables filled. The plugs were in the far end of each table and the rockwool was cut out at that spot to be able to plug/unplug the drainholes.
For the medium, I used 6X12 Rockwool slabs, with side plastic removed, and filled each table completely like a jigsaw puzzle, cutting them to fit if needed, like insulating a wall.
So, each table was basically a giant rockwool slab. I then took white/black poly plastic and laid it across each table, then drew cross lines. At each cross point I would cut an X then place a plant there.
I put the poly in (white side up) to both shield the root zone from light/heat, and to also keep a decent humidity in the root zone. Never once did it dry out. The massive amounts of rockwool allowed for huge roots from all the plants. I would have to cut the rockwool slabs apart after harvest in order to dispose of them.
No CO2 added, only constant venting thru 8"Vortex and carbon filter, and nothing but GH nutes and tap water and pH down.
I yielded HUGE off that setup. It was as perfect as I could ever imagine , despite the fact it wasnt quite fully automatic with the feeding regimen ( and other than the electricity bill).
BendBrewer
Well-Known Member
Once you get it dialed they sure do grow faster. I have plants 4 week into flower that are 3 - 4 feet tall that I cut from the mother on May 15th. Cloned them for 2 weeks, vegged them for 20 days and now they are in tomato cages budding away.
dopeyG
Well-Known Member
I like this idea. i like that it is cheap and compact. you have a perpetual grow??? how much you pull how often off of how many plants??? and i like that it is easy to tak apart quick if needed as well
pazuzu420
Well-Known Member
Well unfortunately my state has small plant limits 4 flowering and 12 in veg state, now with no height restrictions 
This the first go around with the hydro systems so not sure how often yet but I will have some sort of perpetual grow happening. Before I put these into flower i took cuts which are now vegging. I kept the strongest, hopefully the purplest pheno, cut as a mother plant to which I'm appplying some LST to keep it short and save space in the small cabinet. So these will be ready to go in as soon as the others are ready for harvest.
Shouldn't be too much long I figured about 30-35 more days on a 60 -65 flowering time..
This the first go around with the hydro systems so not sure how often yet but I will have some sort of perpetual grow happening. Before I put these into flower i took cuts which are now vegging. I kept the strongest, hopefully the purplest pheno, cut as a mother plant to which I'm appplying some LST to keep it short and save space in the small cabinet. So these will be ready to go in as soon as the others are ready for harvest.Shouldn't be too much long I figured about 30-35 more days on a 60 -65 flowering time..
Heathro
Well-Known Member
I did soil before and after a ton of research i went to this aeroponic set up, it is by far the BEST and offers the Fastest growth rates possible.. It is really pretty simple to use, just fill the resivour add nutes and monitor ph and ppm.. you can see Inches of growth every day once the roots take over.
http://www.icmag.com/ic/showthread.php?t=113425
http://www.icmag.com/ic/showthread.php?t=113425
dopeyG
Well-Known Member
i like the idea of aeroponics but it seems like it would require someone to be around all day so that if anything goes wrong you are their to fixt it. I work 5 days a week. I think hydro would be better because if a pump stops for a few hours so what?? right?? i mean the roots arent getting sprayed they are submerged right??? or am i wrong??? I dont really want to do soil. Is hydro or aeroponics still an option for me if i work fulltime?
Luger187
Well-Known Member
im not too sure how long the roots can go without being sprayed in aeroponics. no matter which option u choose, u should get extra parts incase they fail. it would suck to have it fail right after u leave for work, then u dont find out until the stores close, so u gotta wait until morning to get the parts. by then the plant may get fucked up. not sure if like 8 hours would kill em though
BendBrewer
Well-Known Member
You seem to be worrying a bit too much before you even start. It's not like we hoover over our systems all day long. Check it once a day for any problems and check the ph and ppms. And it's dark half the time so we can't check it. In my rdwc if the pump were to die I would have plenty of time to replace it without harming the plants. My concern at that point would be ph and ppm fluctuation inside the individual buckets but it would be minimal.
What could do a lot of harm quickly is Air Pumps going out or more likely, your air stones getting clogged. This can hurt your roots in a hurry.
What could do a lot of harm quickly is Air Pumps going out or more likely, your air stones getting clogged. This can hurt your roots in a hurry.