LION~of~ZION
Well-Known Member
What nute regimen are you using jonny?
Youve dialed those girls in just right
Youve dialed those girls in just right
My BlueWidow Cross...
- Thread starter JonnyBlunt88
- Start date
momartin31
Active Member
Hey what up jonny B. I just gotta ask, how come when i move my plants up to the 400 watt light the leaves start curling down, temps are staying around 80 with the light on. feeding with 500-600 ppm every other day. Whats the prob?
JonnyBlunt88
Well-Known Member
Thanks Rock...good to see you around again.
I've got these nutes down, so the schedule starts
between week one and two depending on how
healthy the seedlings are.
These BW have taken well, and the nutes have gone
up from 500ppm at week two, to 750 now on week
five.
Momartin...PM'd...
BlueWidow seedlings on day 29 from seed...
Space in my Veg. chamber is getting limited, and
I plan on picking up a Metal Halide bulb to setup in
my closet with my switchable ballast. I have a 400w
HPS going in there now, but I want to vegetate these
Bluewidow for at least two months.
One more shot...
I will be taking clones from all my BW, labeling them, and
using one from each to pre-sex. Clones soon to come...
I don't use feeding charts anymore for Flora Nova.
I've got these nutes down, so the schedule starts
between week one and two depending on how
healthy the seedlings are.
These BW have taken well, and the nutes have gone
up from 500ppm at week two, to 750 now on week
five.
Momartin...PM'd...
BlueWidow seedlings on day 29 from seed...
Space in my Veg. chamber is getting limited, and
I plan on picking up a Metal Halide bulb to setup in
my closet with my switchable ballast. I have a 400w
HPS going in there now, but I want to vegetate these
Bluewidow for at least two months.
One more shot...
I will be taking clones from all my BW, labeling them, and
using one from each to pre-sex. Clones soon to come...
LoudBlunts
Well-Known Member
pics??????
JonnyBlunt88
Well-Known Member
Wish granted...
LoudBlunts
Well-Known Member
why veggin for at least 2 months?
wont they be too big for the cab? or you are flowering them in the closet????
wont they be too big for the cab? or you are flowering them in the closet????
JonnyBlunt88
Well-Known Member
I want to show the full potential of the strain, and what
these girls can produce.
I plan on removing my veg. chamber from my SC to drop
the 600hps down and give my Bluewidow over 4ft. of
head room to flower...I can't wait...
these girls can produce.
I plan on removing my veg. chamber from my SC to drop
the 600hps down and give my Bluewidow over 4ft. of
head room to flower...I can't wait...
LoudBlunts
Well-Known Member
talk about growing monsters!
LoudBlunts
Well-Known Member
im lost....who is that????
JonnyBlunt88
Well-Known Member
Thanks Lacy, When are you going to start your
outdoor? That should be interesting.
Pics down blunts...That was a colleague that I
hooked up with some BB. Thet put a few under
a 1000w bulb on drippers...Looks good Ash.
I have been busy, but today my BlueWidow are
going to be taken out of the veg. down stairs,
and put under 400w of Hps still vegging at 18/6.
This will be temperary, and my veg. chamber will
be moved to a much better room.
For now, the veg. chamber will be taken out and
all the bulbs will be used in the new setup and
should be much better.
I picked up some new rooting gel, and six BW
clones will be taken later.
Pic of the new flowering chamber coming up...
outdoor? That should be interesting.
Pics down blunts...That was a colleague that I
hooked up with some BB. Thet put a few under
a 1000w bulb on drippers...Looks good Ash.
I have been busy, but today my BlueWidow are
going to be taken out of the veg. down stairs,
and put under 400w of Hps still vegging at 18/6.
This will be temperary, and my veg. chamber will
be moved to a much better room.
For now, the veg. chamber will be taken out and
all the bulbs will be used in the new setup and
should be much better.
I picked up some new rooting gel, and six BW
clones will be taken later.
Pic of the new flowering chamber coming up...
LoudBlunts
Well-Known Member
i aint going nowhere man. loyal to the t. you already know!
JonnyBlunt88
Well-Known Member
Yeah Blunts...inspire me...What's the ETA on
the closet...I've spent all day modifying my
cab.
How you doing Rock...More to come...
You will have to stick around a while for the
results Fac...
My Veg. chamber has been dismantled for
flowering purposes, and my BlueWidow have
stepped up to the next level...
They were just dry seeds 32 days ago, and
now have forced me to give them more space.
They will now be finishing there vegetative
cycle under this 400watt HPS bulb, and have
over four ft. of headroom.
I setup a single 1/4" tube on a dual output
airpump, and will have it on 24/7 to aeurate
the water once the pump is setup...For now
I am flushing with Ph'd water, and will
start nuting tommorow...
Some minor pruning was done today, and my
BW should be adjusting to the HPS very soon.
Pics of their new Flowering chamber to
come...
This will be my temperary Veg. chamber until
it is moved to a remote location...
These BlueWidow will be
vegetating for at least another two weeks
under this 400watt HPS bulb.
the closet...I've spent all day modifying my
cab.
How you doing Rock...More to come...
You will have to stick around a while for the
results Fac...
My Veg. chamber has been dismantled for
flowering purposes, and my BlueWidow have
stepped up to the next level...
They were just dry seeds 32 days ago, and
now have forced me to give them more space.
They will now be finishing there vegetative
cycle under this 400watt HPS bulb, and have
over four ft. of headroom.
I setup a single 1/4" tube on a dual output
airpump, and will have it on 24/7 to aeurate
the water once the pump is setup...For now
I am flushing with Ph'd water, and will
start nuting tommorow...
Some minor pruning was done today, and my
BW should be adjusting to the HPS very soon.
Pics of their new Flowering chamber to
come...
This will be my temperary Veg. chamber until
it is moved to a remote location...
These BlueWidow will be
vegetating for at least another two weeks
under this 400watt HPS bulb.
LoudBlunts
Well-Known Member
no no no johnny i was saying that you were one of the first to inspire me. one of the first journals i looked at when i joined, from front to back. i have to at least give you respect of showing you my work. thanks for all the help bro!!!!!!
and the cab is almost done.
i didnt tell you that i became impatient and bought a grow tent? well that was going smooth, but i've shut down operations because of move going on and security.
the cab will be functional soon. i got the tent to grow out my mothers and to start it. i dont think my cab will be good to start mothers in. nor from seed for that matter
and the cab is almost done.
i didnt tell you that i became impatient and bought a grow tent? well that was going smooth, but i've shut down operations because of move going on and security.
the cab will be functional soon. i got the tent to grow out my mothers and to start it. i dont think my cab will be good to start mothers in. nor from seed for that matter
JonnyBlunt88
Well-Known Member
Got ya Blunts...GL with the new op. and the move.
I'm sure you'll figure something out to accomodate
those mothers...I'll be around for any ideas you
have.
At day 33 my BlueWidow are still adjusting to the
400w hps. I took six clones today from four
different BW, and will be pre-sexing them once
they root under a 600w to determine sex.
As far as my cloning method, this is what I use...
Razor Blade
DYNA-GROW rooting gel (on a good reccomendation)
2" rockwool cubes
Heat pad
Plastic tray w/clone dome
100w CFL mount and bulb
These BW clones were taken from the bottom
internodes of four plants, and dipped in rooting
gel.
They were then put into 2" rockwool cubes that
had been soaked for 24 hours in distilled water.
The cube was squeezed out, and the clones were
cut one at a time at a 45 degree angle and scarred.
This is basically slitting two sides of the
clone about 1/2" from the bottom for better rooting.
Excess leaves were removed to put more energy
into establishing the roots.
They were then put in this tray with some Blueberry
and Whitewidow. They remain a constant temp of
about 78F, and stay very humid under the dome. My
clones normally root in about two weeks, but
well see what this DYNA gel will do...
They were labeled with a sharpie, and I should find out
the sex in few weeks...
I'm sure you'll figure something out to accomodate
those mothers...I'll be around for any ideas you
have.
At day 33 my BlueWidow are still adjusting to the
400w hps. I took six clones today from four
different BW, and will be pre-sexing them once
they root under a 600w to determine sex.
As far as my cloning method, this is what I use...
Razor Blade
DYNA-GROW rooting gel (on a good reccomendation)
2" rockwool cubes
Heat pad
Plastic tray w/clone dome
100w CFL mount and bulb
These BW clones were taken from the bottom
internodes of four plants, and dipped in rooting
gel.
They were then put into 2" rockwool cubes that
had been soaked for 24 hours in distilled water.
The cube was squeezed out, and the clones were
cut one at a time at a 45 degree angle and scarred.
This is basically slitting two sides of the
clone about 1/2" from the bottom for better rooting.
Excess leaves were removed to put more energy
into establishing the roots.
They were then put in this tray with some Blueberry
and Whitewidow. They remain a constant temp of
about 78F, and stay very humid under the dome. My
clones normally root in about two weeks, but
well see what this DYNA gel will do...
They were labeled with a sharpie, and I should find out
the sex in few weeks...
LoudBlunts
Well-Known Member
looking good!!!!!!!
