Club 600

jigfresh

Well-Known Member
Nah bro... it was funny. Only issue I had was no fuckin tits. Much better as Nice fuckin tits, lol. Reminds me of another acronym that's R rated. DSL, hahaha.
 

Bobotrank

Well-Known Member
Oh shnap! Dude, how the fuk did I miss that? I knew there was something obvious I was missing. SEE WHAT HAPPENS WHEN I'M NOT STONED?? lmfao. . . I'm off to conquer the world. Or at least try. Have a good one, Jig buddy!
 

treemasterskunk

Active Member
hahaha u guys are nuts..... but correct, as i gave not even a half decent explaination of info for my question!! lol....apologies everyone...

i got a 424 nft tray which just didnt fit in to my closet , lol, but it doesnt matter as i have acomplishe what i wanted to do anyways..:)


Cheers guys
 

3eyes

Well-Known Member
soooooo..... would at least get a reply ! lol

no-one has ever cut a NFT tray down then??? come on guys.....thought one of you must have thought about it ...

I need to take 15 mm off each end....anyone ever tried??
It might work as your only taking the curved lip off if you do try it just make sure light can't get in to the roots and res
 

tip top toker

Well-Known Member
It's the wrong trousers Grommit and they've gone wrong!

You're a bad man, i'e been sat around all night cus of you and your pictures. A Close Shave is next me me list :D got em all.
 

Crystalized

Active Member
I went shopping and got a yield master 2 supreme, an eco plus inline fan classic with a 4 inch end, a phresh filter 4"x12"/200cfm , 25 ft of 6
" ducting, and a 600 watt hps with 600watt balast. This will be for a secret jardin tent silver edition. I haven't opened any of this stuff and played with it yet. Any suggestions on changing anything?
 
heya guys i jus been to check on hern shes still wet at 1.5 inch below soil surface, i had to chop a fan leaf off her coz it was so bad, can anyone had a leaf this bad before? caqn anyone tell me whats up with her?i know she had bad heat stress but ive got the heat sorted now shes still getting worse though
DSC00259.jpg
 

jigfresh

Well-Known Member
how long will you flower for jig?? on the 1 week veg i mean,
Probably 8-9 weeks of 12/12.

I went shopping and got a yield master 2 supreme, an eco plus inline fan classic with a 4 inch end, a phresh filter 4"x12"/200cfm , 25 ft of 6
" ducting, and a 600 watt hps with 600watt balast. This will be for a secret jardin tent silver edition. I haven't opened any of this stuff and played with it yet. Any suggestions on changing anything?
I'm not sure that fan will be enough to cool things. Especially with the 25 feet of ducting. Is there any way to cut that run down? And you are pulling through a filter. I don't think I have the whole picture. What cfm is your fan rated for? You might need a 6" fan to cool the light and pull through the filter.

heya guys i jus been to check on hern shes still wet at 1.5 inch below soil surface, i had to chop a fan leaf off her coz it was so bad, can anyone had a leaf this bad before? caqn anyone tell me whats up with her?i know she had bad heat stress but ive got the heat sorted now shes still getting worse though
I've had leaves like that... mine were from heat. My heat is always pretty constant, so I don't know if it will keep affecting the leaves after it's been sorted. Also, mine could have been from too much light as well. Is that a possibility in your set up? In my opinion it's heat though.
 

curious old fart

Well-Known Member
heya guys i jus been to check on hern shes still wet at 1.5 inch below soil surface, i had to chop a fan leaf off her coz it was so bad, can anyone had a leaf this bad before? caqn anyone tell me whats up with her?i know she had bad heat stress but ive got the heat sorted now shes still getting worse though
View attachment 1786547
She's starving to death and having to eat her leaves for nutrition.

:peace:
cof
 

whodatnation

Well-Known Member
heya guys i jus been to check on hern shes still wet at 1.5 inch below soil surface, i had to chop a fan leaf off her coz it was so bad, can anyone had a leaf this bad before? caqn anyone tell me whats up with her?i know she had bad heat stress but ive got the heat sorted now shes still getting worse though
View attachment 1786547
That looks like old heat damage.
You also said the soil she is in is a wasteland correct? maybe you should put her in a place thats not a wasteland... might help imo.
Also the bout with high heat you had also didi damage to the root system and it will take time to recover. Id just pop more beans and start over, i get depressed seeing ill plants in my garden.
 
oh right ive jus gave her 2 litres water with ph 6.6 with half dose ionic coco bloom and 3/4 dose ionic coco grow also added 2 drops of superthrive fingerrs crossed that will help, i head it can sho in hours if its working that right? cheers for the help curious + rep :D
 

Crystalized

Active Member
the fan is rated for 160 cfm i hope i got steered in the right direction. I think i was told to use a regular fan in the tent to keep the temp down a little i think.
 

treemasterskunk

Active Member
thanks jig,

i am going to chop on monday (my first grow so v. excited :) ), and want to get everything sorted ready for a week or so later (when these ladies have dried), to put in fresh ladies, and a new system.

going to use the previously discussed, (now correct lenght lol) resevoir, nft system 424?? , and going to put 5 clones in there,

veg for about 2 weeks , then flower. hopefully i get the dates right so its ready for just before crimbo.

any thoughts , suggestions or estimates of yield with such a short veg time with these other parameters...

Thanks guys.

TMS
 
I've had leaves like that... mine were from heat. My heat is always pretty constant, so I don't know if it will keep affecting the leaves after it's been sorted. Also, mine could have been from too much light as well. Is that a possibility in your set up? In my opinion it's heat though.
shes only under a 600 and is around 2 feet away now due to the inititial damage, shes still growing but the tips of leaves are curling up and as soon as ive got her nearly healthy i'm going to start moving the light a bit closer so i can judge each day if it gets too close know the distance she prefers.

That looks like old heat damage.
You also said the soil she is in is a wasteland correct? maybe you should put her in a place thats not a wasteland... might help imo.
Also the bout with high heat you had also didi damage to the root system and it will take time to recover. Id just pop more beans and start over, i get depressed seeing ill plants in my garden.
no shes indoor grow potted in 11 litre tub of 80% westlands+ 20% perlite she was me first planted all me baby girls are now potted in coco soil, as i'm going to be using coco i baught coco nutes and didnt want to have to buy more nutes jus for the one plants and i asked the guy and he sed that they will work just not as well as in coco soil, anyways all way thru germ and veging she only every had plain tap water that had been stood a day occasionally mixed with still bottled water she was fine and thriving all way thru veging untill i put her into 12/12 with the light too close (this was about a week ago) since then she also sufferd heat stress as the temp got to 40c or 104f, so i added another fan and also a new oscilating fan i have the cool air being blown from below the plant upwards towards the light which helps the hot air rise and plant stay cool much better so now shes sitting jus at 29c or 84f,

like i sed ive got more beans in vegging and putting sum more in germing tonight as got me order arrive in post today :D yay 38 feminised seeds n 4 normal lol jus intime for xmas too since theyre all around 8 week flowertimes :D
 

jigfresh

Well-Known Member
the fan is rated for 160 cfm i hope i got steered in the right direction. I think i was told to use a regular fan in the tent to keep the temp down a little i think.
To me, a 160 cfm fan isn't going to cool everything. I think most of us in here are using 6" or 8" inline fans rated for 400+ cfm's. It might work though. If all the boxes are still closed I would exchange for a bigger fan. A regular fan, like an oscillating one you use at home, will be good for moving air around in the room, and is good at moving air towards the air being sucked out... but it won't really cool things very much. That's what the exhaust fan is for. Hope that helps a little.
 

treemasterskunk

Active Member
question guys.....


in the flushing stage now, and i have ph'd my water down a bit to get it to 6.0.

should i be doing this, or running straight tap water into bubble buckets??

asking cos i can find no info on it anywhere...

thanks guys

TMS
 

Heads Up

Well-Known Member
Tree, sounds good to me ph'ing your water first to be safe. If I used my tap water to flush it might kill my girls, it's over 8.

Edit. I agree with you jig, a bigger fan is needed, a four inch just won't suck the heat out with a filter connected.
 

whodatnation

Well-Known Member
Any water getting to your girls should be ph.

I also agree that the 4 inch wont cut it.
You will also need a bigger filter because you dont want to exceed the cfm rating on it.
 
Top