I'm Not F%ckin' around with This Hash Thing Anymore

[t0k3s]

100 gets you 10.

whats the max you have done

 

[fdd2blk]

whats the max you have done

in what? i use machines for mixing so it's hard to say. with a machine i can go up to 2000 grams of trim at a time.

 

[t0k3s]

in what? i use machines for mixing so it's hard to say. with a machine i can go up to 2000 grams of trim at a time.

2000g's a load!dam so you would average around 200g's of hash from one load..i think my max was like 30g's lol thats lightweight compared to yours.

 

[fdd2blk]

2000g's a load!dam so you would average around 200g's of hash from one load..i think my max was like 30g's lol thats lightweight compared to yours.

using the bubblator machine i could get about 20 - 30 grams at a time. i've only done 1 run in the full sized washer so far but i got over 100 grams.

 

[t0k3s]

using the bubblator machine i could get about 20 - 30 grams at a time. i've only done 1 run in the full sized washer so far but i got over 100 grams.

i think this year im saving lots of trim and getting a washer

 

[Rudy18]

Do you grind up the trim? I think that Jorge Cervantes guy did when he did his, dont know but i thought you might get more yield doing that.

 

[fdd2blk]

Do you grind up the trim? I think that Jorge Cervantes guy did when he did his, dont know but i thought you might get more yield doing that.

no, do not grind your trim. you will end up with ground plant matter in your hash. the trick is to be as gentle as possible with the trim. once you start breaking down the actual plant matter you contaminate your final product.

 

[Bamm Bamm]

ahh fuck I cant use mine for hash I ground mine all up..argh..I'll make butter I guess..I've been smoking hash all day you guys inspired me=) My chick showed up and was like..Sooo what have you done Im like well...Smoked some hash and some more and watched some movies=)

 

[t0k3s]

no, do not grind your trim. you will end up with ground plant matter in your hash. the trick is to be as gentle as possible with the trim. once you start breaking down the actual plant matter you contaminate your final product.

i think i read in a previous post of your's, that the material should be able to tear but not crumble down to keep your hash more pure.

 

[fdd2blk]

Please do not press your wet resin. You need to absorb the water out of the wet resin by placing the bag with the wet resin on a shami, or a stack of paper towles. Then place your wet resin on a drying screen (as you see in the photo) to properly dry, never press your resin while it is still wet. Water will be trapped inside your resin and will never properly dry. It will mold after time, guranteed, plus you are selling water to your customers. Not good.

Dry powdered resin is worth more to the customer, the customer can always press it there self when they want. Resin powder burns easier.

The meat grinder extrusion press was our idea. The resin powder was dried properly using the shami method and then left to completly dry for a minimum of 7 days on a drying rack before it was extrusion pressed using a comercial meat grinder
This was an experiment and I would not use it again.

You can always make your own ice, buy filling ziplock bags full of water and placing them in the freezer the night before. Then all you have to do is break up the ice with a hammer. You can actually stack alot of bags full of water in a normal kitchen freezer.

Aqua Lab Tech

which photo? i went thru the thread again and can't find it. i'm ready to run another batch and i want to dry it properly this time. i plan on having at least 200 grams so i will need a big area to spread it out to dry. i don't have a screen that big to lay it all on. i have a wire screened strainer that came with the bubblator. i can sift it thru that to break it up into crumbs but from there i'm wondering how to dry it. i have plates and trays i can spread it out on but they trap moisture underneath. do i need to run over to the craft store and just get a big piece of screen?

 

[Bamm Bamm]

Man I just smoked a big bowl or that last hash again..FDD lmk if your doing that hash this week I can give you a hand if you need I've got some time off

 

[Aqua Lab Tech]

which photo? i went thru the thread again and can't find it. i'm ready to run another batch and i want to dry it properly this time. i plan on having at least 200 grams so i will need a big area to spread it out to dry. i don't have a screen that big to lay it all on. i have a wire screened strainer that came with the bubblator. i can sift it thru that to break it up into crumbs but from there i'm wondering how to dry it. i have plates and trays i can spread it out on but they trap moisture underneath. do i need to run over to the craft store and just get a big piece of screen?

Check out the first photo, in my other posts, the big thing with the yellow screens!!!
That photo has everything you need in it.

Here is a link to by the proper drying rack that will be plenty for you.
Screen Frame Rack w/ 20 Slots - Aluminum

Below are some more photos of some drying setups.

Aqua Lab Tech

 

[fdd2blk]

Check out the first photo, the big thing with the yellow screens!!!
That photo has everything you need in it.

Here is a link to by the proper drying rack that will be plenty for you.
Screen Frame Rack w/ 20 Slots - Aluminum

Below are some more photos of some drying setups.

Aqua Lab Tech

there it is. i think i saw the rack and just over looked what it was. badass is what that is. i need to invest in a roll of screen. you are correct about the mold. i either have to store mine in the freezer or an open container. if i seal it overnight it start to form mold. the club i am suppling is begging for more but i want to dry it right this time. i think it will melt nicer as well. mine bubbles but doesn't really "melt".

funny i just started this new thread before i saw your post. note the time stamp and your posts time stamp. .........https://www.rollitup.org/general-marijuana-growing/58167-i-think-i-ll-make.html#post644113

 

[fdd2blk]

so once dry i was thinking of grinding it in a coffee grinder to get it nice and powdery then hand pressing it. will this work?

 

[fdd2blk]

Check out the first photo, in my other posts, the big thing with the yellow screens!!!
That photo has everything you need in it.

Here is a link to by the proper drying rack that will be plenty for you.
Screen Frame Rack w/ 20 Slots - Aluminum

Below are some more photos of some drying setups.

Aqua Lab Tech

i'm scared. when i let it get too dry it gets hard like gravel and won't bind together. what do i do now? .................View attachment 86614



for some reason i can't see all your pics.


.

 

[Aqua Lab Tech]

Do not be scared. This is how hash really will be, unless you have Super quality. You will need to slightly heat your hash now, to get it to press into a 50 gr bar or whatever you want to do with it.

Laminating machines also make good presses.

Or try selling it in powder form? I know the clubs want it in solid form. It is really better kept in powder form so the medical patient can do what he or she likes with it. Meaning smoke it in powder form or press it and smoke it pressed. This way is more medical friendly. In powder form you know that it is unadulterated.

Plus it will not mold as easily if sold wet.

I do not know why you can not see my photos? Anybody else with the same problem?

Aqua Lab Tech

 

[cali-high]

i would lightly mist it then press it together for a final dry....

but im just making a guess im no hash professional

 

[iBLaZe4tozErO]

I actually like my hash in that form. Its just harder to store vs one solid piece but some of the best hash ive had came like that. Or dulicate the piecemaker and really press the shit out of it.

 

[cali-high]

i can see your photos

 

[iBLaZe4tozErO]

I actually like my hash in that form. Its just harder to store vs one solid piece but some of the best hash ive had came like that. Or dulicate the piecemaker and really press the shit out of it.

aqua labs take on heat seems kool take a oven bag then put hash in one corner. Dip it in warm/ hot water temp may vary. Then press