101 Already Asked Questions

flooding? as in flooding the bed so as to submerge the roots entirely? and then my next question - flooding every 3 hours during light cycle, is it the same in veg (18-6) and budding (12-12)? thanks for all the help! Also is it critical to have 2 hps or can it just be 1? atm i realli only have enuf space to experiment with 2 lights and i would prefer to use 1 of the lights to veg and 1 for budding that way i break down the cycle into a 2 cycle, less wait time =)
 
sarsface said:
flooding? as in flooding the bed so as to submerge the roots entirely? and then my next question - flooding every 3 hours during light cycle, is it the same in veg (18-6) and budding (12-12)? thanks for all the help! Also is it critical to have 2 hps or can it just be 1? atm i realli only have enuf space to experiment with 2 lights and i would prefer to use 1 of the lights to veg and 1 for budding that way i break down the cycle into a 2 cycle, less wait time =)
Click to expand...
Yes you will have to flood the bed (tray table) so that the roots get nutrient solution in order to propel the growth of the plants. Make sure that you include air stones in your res to oxygenate the water. This will also improve growth as well. You may also want to add 35% hydrogen peroxide to the water before adding your nutrients & ph.

Yes you will only flood every 3 hours during the light cycle. Some growers flood 1 time during the night cycle as well. In Veg you can keep the same schedule or flood every 4 hours. Keep in mind that every plant is different as well. If you see the plants are getting over watered then lower the schedule.

With lighting for a 4 x 8 table I would do 2 600s, 3 600s or 2 1000 watt hps lamps. Do not attempt this grow with 1. Youll be wasting your time. To tell you the truth if your attempting sog then go straight from clone right into flower. You can veg for 7-10 days if need be but any longer youll have a jungle.

Take a look at the pic below. This grower has 161 pots in a 4 x 8 in 5x5 square pots. He uses 2 600 watt hps lamps on a light mover. The yield is 3lbs 10oz dry weight every harvest. There are some commercial strains that will average more. Imagine putting two 1000s on the 4x8 or having 2400 watts with two 4x8 tables. 1200 to each table. thats 7lbs per harvest.
 

Attachments

  • 22826P10100221.jpg
    22826P10100221.jpg
    119.4 KB · Views: 270
Also remeber when you start to flood your table that you have to have the timingof the flood applied to the system. Some pumps may take 5 minutes toflood the entire table & others may take 15 mins. :peace:
 
i just put my recently germinated seed n2 a jiffy greenhouse and placed it n front of a heater n awaitnce 4 it 2 sprout. is this a good idea or should i move it from the heater

also someone asked a question awhile back that wasnt answered about alkacelzer and water. can this mix create co2 for the plants???
 
Remove from the heater asap. Keep seedlings in a cool dark place until they sprout. Do not expose to light until they sprout. Try to get a heating mat & set the temp on the mat between 75-80 degrees. The carbonated water thing is old school. Your not at that stage yet. When you get ready get oneofthose cheap CO2 Boost buckets. Theyll last from 60-90 days I think. Distilled water can be used, but as proper practice still read the ppm & ph. Good luck.
 
kk understood, 1 more question why would i use 35% peroxide b4 adding my nutrients? wouldnt that kill my plants? thanks for all the help southflorida
 
sarsface said:
kk understood, 1 more question why would i use 35% peroxide b4 adding my nutrients? wouldnt that kill my plants? thanks for all the help southflorida
Click to expand...

35% hydrogen peroxide will kill any bacteria in the water & will also provide excess oxygen to your roots. The best brand to get & what most growers prefer is Grotek H202 (Google it). I believe it is 2ml per gallon. The directions will be on the back of it. Make sure you properly mix it with a wooden spoon or what ever is your choice of mixing your supplements & nutrients. :hump: :peace: No problem Im happy to help. It helps me to stay sharp as well.
 
swisherhouse said:
how many plants is good for a 400 hps.
Click to expand...

The lamp should be 12-24 inches from the plants first of all. You can go by this or by the below chart. Depending on whether your growing bushes or SOG.

400 watt hps: 2.25 x 2.25= 5 square feet
400 watt mh: 2 x 2= 4 sq feet

600 watt hps: 3 x 3= 9 sq feet

1000 watt hps: 4 x 4= 16 sq feet
1000 watt mh: 3.25 x 3.25= 12.25 sq feet
 

Attachments

  • grow-light-height.gif
    grow-light-height.gif
    2.1 KB · Views: 196
  • hfreflectorareacoverage.jpg
    hfreflectorareacoverage.jpg
    57.5 KB · Views: 128
hey southflorida, is there anyway to cheap out on a chiller? i got all the parts and tools i need to do this, im just not too interested in shelling out 7-800$ for a chiller..
 
i would just like to say thanks a lot to southfloridasean. my seeds sprouted n a matter of days thanx 2 your help
 
hey southflorida, ive been doing research on co2, and id love to give it a try unfortunately i have funding only enough for 1 burner and monitoring system atm. I was wondering if co2 is better used in the baby/veg state or in the final budding stage and if i were to use co2 with the baby/veg would it be harmful to not use co2 in the budding stage after the plants have been in a co2 rich environment? Also if u know of any good brands or could recommend anything would be awesome! maybe a monitoring system too?


lol sorry for all the questions and tyvm for all the help uve been so far.
 
CO2 can be used for veg & flowering. Make sure to keep your ppm at 1500 thats really the only way CO2 will be effective. Also remember that fans can not exhaust while CO2 is being run. It will just waste the CO2 enrichment within the growroom. CO2 works best in a sealed growroom. But for this you will need aircooled lights or an ac within the room. :peace:
 
You must log in or register to reply here.
Back
Top