Idea about co2

[Oakhurstweedhead]

Ok so I seen them extract limonene from an organge in a centrifuge(sp)vial well imagine this after looking up
the video as the cap isn't fully on the gas as it's is boiling off is escaping through the threads right?

Well think of this pack a vial on the bottom with dry ice put your kief or plant material in then another layer of ice put a 25 ui ss screen over then cap it puncture pin size holes around the cap and tighten it up then soaks rag put it in the microwave til it's hot as fuck. Go outside and wrap the cloth with a rubberband putting it upsidedown into a plastic bowl and backing off to a safe distance to let it do it's thing my thoughts are
the pressurized tube and liquid carbon dioxide boiling inside forces the expanding gases to rise to the solid top pushin the pressurized co2 through the material and forceing resins through the screen onto the lid of the cetrifuge vial as it's looking for a way to escape( that being the tiny holes in the lid below your screen) inside the vial I'm wondering if this would work for a small scale extraction being partially safer to make as it would be plastic not glass and co2 won't combust and is pure what do you guys think is it gonna be a big fail or possibly work I'll be tryin. It in a few days when I grave some vials so pretty much bho without a place for a nozzle just closed on 1 end and the force of expanding causes the liquid co2 to push through the holes on the bottom and leave the resin I'm stoned and tired sorry if it seems stupid

 

[Oakhurstweedhead]

Look up liquid carbon dioxide extract on YouTube

 

[oHsiN666]

so there is a way to do CO2 extractions at home?? do i need a Tanisium Extractor?? been hearing mad good things about Co2 hashs and concentrates.

 

[washedmothafuka]

No you need lab grade equipment or a $1k+ extractor. Just do bho.

 

[cannabineer]

Carbon dioxide goes critical at 31.1ºC = 87ºF, and a pressure of about 1100 psi. For a sub-crit extraction you have to operate at about room temp. Even so, with those pressures, specialist equipment is recommended. A vial would just grenade on you. cn

 

[oilmkr420]

so there is a way to do CO2 extractions at home?? do i need a Tanisium Extractor?? been hearing mad good things about Co2 hashs and concentrates.

check out my vid on youtube showing how i extract w co2, "420 honey oil extraction co2."

 

[oilmkr420]

No you need lab grade equipment or a $1k+ extractor. Just do bho.

you dont need to spend 1k on a vessel. you could spend more or less, but i sell co2 extractors starting at $200 bucks for an entry level unit, i also have them as pricey as $700 6,000 psi. its a 5 foot vessel and weights a ton. so you need lab equipment for bsho, all needs to be sparkless equipment, vaccuum distalation equipment, rotovap etc. co2 needs none of that. no purging needed.

 

[washedmothafuka]

HOLY FUCK!!!! CO2XTRACTOR...YOU FUCKING SIGNED UP FOR ROLLITUP NOW?!?!?! This guy is a clown.

You don't sell shit, your method is super scrappy and produces nearly nothing. Get the fuck out of here and stop spamming 3 different forums with your non-sense.

Mods...please just ban this guy now, he doesn't do anything but troll. Period.

 

[oilmkr420]

View attachment 2062505View attachment 2062505wow yr somekinda late bloomer or wut???

 

[oilmkr420]

clown, tell me you dont use a plastic bottle w butane now do yah? lol

 

[oilmkr420]

Carbon dioxide goes critical at 31.1ºC = 87ºF, and a pressure of about 1100 psi. For a sub-crit extraction you have to operate at about room temp. Even so, with those pressures, specialist equipment is recommended. A vial would just grenade on you. cn

high pressure vessel, gauge,valve, is bout it. thermometer! scale, co2, any co-solvent, bingo bango. 5th grade set up.

 

[oilmkr420]

check out my vid on youtube showing how i extract w co2, "420 honey oil extraction co2."

not from washedmouth you havent!!!

 

[oHsiN666]

hahaha, washedmouth...that kid. anyways. he needs a little insight. i need to talk to you. i have heard of the Tamisium Extractors. can i extract with Co2 with one of them? can you please provide me more info on your device. i am high intrigued. i love making oil. i ditched the plastic extractor and have never looked back! the taste is sooooooo much cleaner. i can taste the citrus in my oil form the Tangerine Dream i blasted!! its so good i can stop my self from smoking it til im coughing my brains out. nah, its actually pretty damn smooth to, i really dont cough at all, but if i take too many in a row, i most def will!!! please tell me more about your device. do you have a website? or is it just direct deposit it into your Paypal? do you have an eBay account? please, please, please tell me more!!!!

 

[oHsiN666]

i have a friend tell me about liquid Co2... is this a good idea? a Tanisium Extractor is in my future this year for sure! maybe just the table top model but im so in love with that device!!

 

[washedmothafuka]

Wow...your the one asking if Co2 is actually a good idea. Come on...if you've done the slightest bit of research you would realize that the effort needed to make a quality co2 concentrate is significantly more than that of bho. Plus...the shit you've been producing looks garbage and I've only seen you put out what....like .5 grams of oil in those three vials...

You need a better control of your temperatures. OhsiN...You finally got bho down and now you're already going to blow $1000k to do co2? This guy is a fucking troll. Don't believe me if you want, but he was already banned from GC for trolling so hard.

 

[oilmkr420]

you could listen to someone I already labeled associated w a bunch of lames, ass city. or you can open your minds to new breakthrough techniques that will have you yielding like this $8.00 & $5.00 extraction from the same oz of weed/trim mix. show those kinda yields washedmouth w tane, cost you like $40 to do the smaller batch suckafish!!! look @ the depth of the oil, nice, creamy, no purge recipe!!! translucent. you can read through the oil to the print on glass!!!

 

[oilmkr420]

hahaha, washedmouth...that kid. anyways. he needs a little insight. i need to talk to you. i have heard of the Tamisium Extractors. can i extract with Co2 with one of them? can you please provide me more info on your device. i am high intrigued. i love making oil. i ditched the plastic extractor and have never looked back! the taste is sooooooo much cleaner. i can taste the citrus in my oil form the Tangerine Dream i blasted!! its so good i can stop my self from smoking it til im coughing my brains out. nah, its actually pretty damn smooth to, i really dont cough at all, but if i take too many in a row, i most def will!!! please tell me more about your device. do you have a website? or is it just direct deposit it into your Paypal? do you have an eBay account? please, please, please tell me more!!!!

people have been comming from all over cali to get my instuctions, w out needing to post pictures, or really anything but write my findings. w that people where reading my posts, tracking my l.a. craigslist ad, and giving me calls here and there. ass city was the driving force of my new studies and their hate just led me to overcome objective over objective to where anyone w a brain could see all signs pointing in favor of using co2 as a solvent vs butane hands down, blindfolded, pepsi challanged one after the other, and butane was obvious. fresh yes, but noticably different taste, spicey throat thing, and it made me fiend another dab. hands down, undisputed, cleaner, meaner,greener, all discribe co2 xtrax. i do paypal, i dont drive-got a horse, and have good customer satisfaction ratio who ive made backyard co2 xtractors start comming out the woodworks. shops dont want you knowing this shit, cuz it will flood the market if we all did it. so we still kinda need fools to extract w butane to keep the value high!!! dab for a fraction of shop costs. pm me as i dont want to be trolling here!!!

 

[oilmkr420]

Wow...your the one asking if Co2 is actually a good idea. Come on...if you've done the slightest bit of research you would realize that the effort needed to make a quality co2 concentrate is significantly more than that of bho. Plus...the shit you've been producing looks garbage and I've only seen you put out what....like .5 grams of oil in those three vials...

You need a better control of your temperatures. OhsiN...You finally got bho down and now you're already going to blow $1000k to do co2? This guy is a fucking troll. Don't believe me if you want, but he was already banned from GC for trolling so hard.

it was less than that total. 0.1 is what those vials had in each one, to go to lab for annalysis. still yields more than a can of butane wut i had in those three vials, lol.

 

[washedmothafuka]

You still extracted a lot more shit than you should of. It looks good, but not fantastic. Keep it up, you still have a lot of improvement to go.

It yeilds more because you have more impurities btw, that's why your oil is darker.

And you know you can multi-reply right? It makes it a lot easier. But holy shit man...you like to ramble ramble ramble!

 

[oilmkr420]

i have a friend tell me about liquid Co2... is this a good idea? a Tanisium Extractor is in my future this year for sure! maybe just the table top model but im so in love with that device!!

whats that thing cost anyways? cant do co2 w that. bang, 1000 ways to die episode. could probably achieve near results w a simple check valve, tank to tank transfer/extraction, but I havent tested it yet. Im always willing to ditch a method for a better one, and since nothings perfected and still in the research phases, I try new things, stick to what works, and let inspiration and technique have their influence on methods i employ, but its an always changing thing that progresses and may be very different in the near future. so when new findings happen, i will post those as well. you guys really dont hate like ass city be hatin. so thanks for that, washmouth got lots of love forya 2, cuz without that negative feedback to overcome i couldnt have convinced people on my own as thuroughly as you guys let me convince them. start creepin out the woodworks. like i said, i have no problem paving the way for a old forgotten lost art, and replacing the common knowledge that is today, for a superior method thats safer. that shit pays for itself w the first couple batches, and its your foot in the door w the clubs. if you so choose that route, thats all you guys whoever wants it. i have other plans.