Why is my leafs drooping someone help me?

[mememolly]

My other seeding's leafs are all straight but this one is kinda drooping more and more what could be wrong with it?

 

[Clonex]

Its a little stretched , add some more hydroleca clay to it to support stem ,
let it grow , it will be fine, imo
Clonex

 

[mememolly]

Its a little stretched , add some more hydroleca clay to it to support stem ,
let it grow , it will be fine, imo
Clonex

So add the hydroton ontop of the rockwool?

 

[Clonex]

So add the hydroton ontop of the rockwool?

Yes , it will help support it , with no ill effect , i do the same ....

 

[MrGhettoGrower]

You may be give'em too much light I'm not hip to the LED's but
I'm thinking this is too much and you should have'em under
cfl's or my personal favorite is fluorescents

 

[Clonex]

You may be give'em too much light I'm not hip to the LED's but
I'm thinking this is too much and you should have'em under
cfl's or my personal favorite is fluorescents
View attachment 2040897

Led's are full spectrum and perfect for this , i have to disagree , Flo's work fine also , but no need to change.....

 

[mememolly]

my plants are getting worse you can see the leafs are getting wrinkly and doesn't look too healthy and it hasn't grown in 3 days what should i do?
View attachment 2042355

 

[Clonex]

The picture link not working .....

 

[ogreballerina]

my plants are getting worse you can see the leafs are getting wrinkly and doesn't look too healthy and it hasn't grown in 3 days what should i do?
View attachment 2042355

Re pot with good soil and perilite mixture ASAP...and try putting them under another light source. Even a couple CFLs will help.

LEDs are cool and everything...but they still don't have enough blue / white light for vegging. I know it says it does..but it doesn't.

 

[mememolly]

so i should transplant my hydroponic into soil and change the light to CFL?

 

[mememolly]

The picture link not working .....

heres some pictures i took i filled the hydroton on top of the rockwool

 

[MrGhettoGrower]

These pic's are a lot better the seedlings are very dark green so what
and how much you feeding'em in ppms it's possible over feeding of nutes
it don't look like ph but you never know you are using good ph and ppm
meters yes I heard then LED light are okay with mixed reviews some growers
like'em some don't but what I was thinking you should start'em using
cfl's or flo's cause them LED's are too much for the seedling I'm never
use them~

 

[mededcannabis]

View attachment 2040588View attachment 2040589

My other seeding's leafs are all straight but this one is kinda drooping more and more what could be wrong with it?

they are stretching(thats correctable as mentioned). what are your water temps, room temps, ph, what are you feeding, how much air are you pumping into the water, these are possible issues to address right now.

 

[mememolly]

My ph is 5.6-6 and im feeding about 1/4 of (2.1.6) (5.0.1) (0.5.4) some hydroponic stuff. And im pumping with 2 80 gallon pumps into 90 gallon of water. Room temp is 71-72 . I just switched my LED to CFL right no.

 

[Clonex]

My ph is 5.6-6 and im feeding about 1/4 of (2.1.6) (5.0.1) (0.5.4) some hydroponic stuff. And im pumping with 2 80 gallon pumps into 90 gallon of water. Room temp is 71-72 . I just switched my LED to CFL right no.

From what you say , everything seems fine , it's not the light , do you have any Canna Rhizotonic ??

 

[mememolly]

No don't have any Canna Rhizotonic is it useful? I can get some. I also got PPM meter but i don't know what the PPM should be right now any idea?

 

[Clonex]

• seedlings and clones: 100-250 ppm
  10 days - 2/3 weeks: 500-600 ppm
  one month - flower: 800-1000 ppm
  flower: 1000 ppm, slowly raise to 1300
  never exceed 1300 until experienced and always remember to check ppm of water and add to base numbers.​

  
  
  ​