The Weed Nerd~

Status
Not open for further replies.

Noximus

Well-Known Member
im me....not sb not nevil not gypsey.......but i do breed with a seed mother.
hey man never heard back from you do you have any grow journals on here or any other forums? if not can you post some pics of your grows past and present?? if you've been breeding for 15 years , certainly you have some of these right????
 

panhead

Well-Known Member
i'm tired of hearing subcool lies and bullshit. everything he ever wrote he took from every great breeder and called it his. subcool is a mr. nice kinda guy.........he uses their genetics in every cross
Look man you've made your point,several times now,every member deserves the right to speak their mind but not at the expense of others enjoyment of the forums.

You dont like subcool,you dont like his products,you dont like how he does business,we have heard what you had to say now please move along.

There is a difference in posting your beliefs vs badgering somebody,you've had your say & everybody can read it now its time to allow others to enjoy the thread.

Please stop the harrassment.
 

Irie Genetics

Active Member
Earlier I posted about my funky Vortex seedlings. I wanna be clear that I wasn't bitching. I have grown enough DANK Subcool gear to not be offended by one pack that could have easily been MY FAULT. After having more time to look at my babies I think my soil was too heavy and/or wet and they had to push too hard causing the seed casing to rip off during the earthbreaking push... See... I FUCKED UP. I learned to not flood my babies and to use a lighter soil. An expensive lesson but I can order more seeds. I see that the 'tude is still giving away a free pack of Sub's seeds if you buy 10. I'll grab more Vortex and a pack of Pandora and end up with a freebie of 3D to replace my soggy Vortex. (heh, heh, soggy vortex)
I was asking if anyone has had this problem before or any advice so that I don't waste more seeds to simple mistakes.
I picked up a pack or rapid rooters today and I am gonna give Sub's method a run. I'm hoping my JTR, Time Wreck, Space Jill and 2 packs Qush arrive before the 1st so I can get some of them going on my next run!
Keep it kind. If you think you know everything you have PLENTY left to learn.
 

Ccoastal

Active Member
for disliking sub so much you sure are antsy to toss out random, pointless updates in here 15yearsofbreathing.

for those of you that disagree with him, i suggest ignoring him completely, add to ignore list if you must, but lets not bog down the thread.

please dont feed the trolls

Ccoastal
 

Noximus

Well-Known Member
just picked up my Ripped bubba(idk why but i just love saying that name lol) and my QUSH from the post office. complained about mail lady and her refusal to ring the doorbell. hopefully that will lead to less trips to that federally ran building. i know its not a big deal but i just dont like anything that has federal jurisdiction. 5 TGA strains down (AceOfSpades,TimeWreck,Querkle,RippedBubba,Qush) only 21 more to go!!! unless that querkle x Pre98 bubba they're testing now makes the cut then its only 22 more haha but by then i plan to have a nice amount of TGA gear. next on the list... cheesequake, jillybean, vortex, plushberry, space jill... in no particular oder . *disclaimer: subject to change to other TGA strains! lmao
 

Darwin Riddle

Well-Known Member
Has anyone grown Deep Purple yet? 15...let's see some of your strains! Quit yammering!! I used to look forward to updates on this thread....why do you have to be so negative?? Negativity is poisonous to the soul. Go plug Mr. Nice strains, somewhere else....you only make me NOT want try them!!
 

Senseimilla

Well-Known Member
just picked up my Ripped bubba(idk why but i just love saying that name lol) and my QUSH from the post office. complained about mail lady and her refusal to ring the doorbell. hopefully that will lead to less trips to that federally ran building. i know its not a big deal but i just dont like anything that has federal jurisdiction. 5 TGA strains down (AceOfSpades,TimeWreck,Querkle,RippedBubba,Qush) only 21 more to go!!! unless that querkle x Pre98 bubba they're testing now makes the cut then its only 22 more haha but by then i plan to have a nice amount of TGA gear. next on the list... cheesequake, jillybean, vortex, plushberry, space jill... in no particular oder . *disclaimer: subject to change to other TGA strains! lmao
Picking up seeds delivered by mail = federal jurisdiction no matter where you are.
 

DR. RESINTHUMB

Active Member
Interesting article for all you nerds....Weed (Marijuana) Potency When Growing Weed Indoors

Forget the big colas and stinky weed buds: It's all about the resin in the weed.
Weed (marijuana) is perhaps the only plant in history grown primarily for its trichomes (thc). Whether used for hashish or weed the objective is still the same: production and harvest of THC-rich trichomes (crystals). Yet often the indoor weed grower loses sight of the real goal of growing weed indoors. Bud size, density, coloration, flavor and odor are all of little value if they do not produce the euphoric sensations we seek. When growing weed indoors one of the objectives is to increase the level of thc content.

Trichomes (thc) and it's resins
Trichomes come in many shapes and sizes and are used by plants for many different purposes. Weed uses its trichomes for a variety of purposes, some of which require THC and other cannabinoids to be effective, and others that do not.
The primary goal of any plant including weed is to create and nurture seeds to the point where they will be viable for future growth. Trichomes help prevent seed damage from dessication, insects, animals, light degradation and fungal disease. Perhaps the most successful function of trichomes in the proliferation of weed is their attractiveness to humans.







An important thing to remember is that heavy trichome production is not necessarily an indication of a potent weed plant. Some marijuana (weed) strains have moderate layers of trichomes yet pack only a headache.High thc content in weed is best.
This is because the resins that flow within may or may not hold the THC and other cannabinoids that we are looking for.
Indica weed varieties often look more heavily crystallized than Sativas, yet typically don't have the same mind-warping capabilities. Even with a known high-THC clone, THC level and cannabinoid ratios may change depending on environmental conditions.
What defines drug strain marijuana is the plant's ability to convert cannabidiol (CBD) or possibly cannabichromene (CBC) into THC. If we as growers do not provide the plant with reason to make this conversion it likely will devote its energy elsewhere, to aid in its survival for the plant when growing weed indoors.







Environmental Influences on THC Levels
It takes high quality genetics to produce high quality weed, but genetics in marijuana are only half of the equation. The genetic structure (genotype) only plays 50% of the role in determining the appearance and quality of a given marijuana -weed plant. The other half is usually determined by environmental factors and conditions such as light, temperature, humidity and the soil nutrition.Increasing THC Levels in weed is simple if you follow certain rules described below. All these factors play a role in both physical and chemical nature of weed - marijuana's trichomes. THC levels in marijuana are very inportant to consider.
The best way to take a look at how the environment affects THC production is to look where on the marijuana plant has naturally adopted a high THC profile. As weed - weed has spread around the world it has taken on many different traits to help in its adaptation to varied areas. The best drug varieties have always been found at equatorial, high altitude locations. The one thing which both of these variables have in common is high light intensity and a large amount of UV light in the spectrum.
Recent tests in outdoor plots of marijuana clones that were grown at different altitudes have shown that there is connection between higher altitude and increased thc potency. This likely means that THC-rich resins act to protect the marijuana-weed plant and its seed from both higher light intensities and ultraviolet presence. It's no surprise that marijuana has developed a chemical to protect itself against the Sun's damaging UV rays, as they can be injurious to all forms of life,plant and human.THC levels in marijuana are very inportant to consider.
In a marijuana-weed plant's search for survival, energy put towards unneeded processes is wasted. Therefore a high-THC weed plant grown in a low THC environment will likely produce a medium THC result.


Humidity also plays a role in plant THC resin production. Although some potent equatorial weed - marijuana strains do seem to occur in highly humid areas, most high-test land races have evolved in drier areas, like Afghanistan. Increasing THC Levels in weed is simple if you follow certain rules described below.The aridity of the areas of Afghanistan where Indica marijuana-weed strains have evolved is quite apparent by the trait of large dense thick flower clusters. This would only be an advantage in an area of low humidity, as marijuana plant flowers will mold in anything more.
There are many examples of non-marijuana plants producing a resin in order to protect themselves from drying out. The waxy coating on cactus and other succulent type plants is a big example. Marijuana flowered in humid conditions will often have a longer stalk on the glandular trichome than the same of marijuana strain grown in drier conditions. While this may give the appearance of being very crystallized, it will likely contain less THC than the same plant grown in a drier environment. THC levels in marijuana are very inportant to consider.


Flushing: pros and cons
Much time and thought has been put into the feeding needs of each part of marijuana's life cycle, yet for some reason the final stages of resin development always seem to be ignored. But the vegetative period of plant growth is only setting the platform for us to produce the trichomes that we are after.
Flushing in particular seems to be something that is over-emphasized by many of today's growers. Many growers "flush" their plants with straight water or clearing agents during the final weeks before harvest in an effort to improve taste and smokeability. The theory is that this forces the plant to use up stored nutrients that may affect these qualities. Although this is certainly true to some extent, what many are forgetting is that not all nutrients can be moved within the plant.
Nitrogen, which is the main factor in poor-tasting bud, can be moved within the plant. If not present in the root zone a plant will take it from the older leaves to support newer growth. Calcium, however, is a nutrient that cannot be moved within the plant, if it is not present in the root zone it is not available for growth. Little research has been done on nutritional requirements of cannabis during the final stages of flowering, but it seems likely that calcium is vital as it is crucial in cell division. A calcium deficiency at later stages could therefore adversely affect trichome production.
This is not as serious of a concern for soil-based growers, as lime or other calcium sources which are mixed into the soil likely will provide sufficient nutrition even while flushing with pure water. But hydroponic growers using very pure water sources with little naturally occurring calcium could have problems. Flushing is certainly a valid technique, but is easily overdone and is not a quick fix for overfeeding earlier in the flower stage.
Some studies have shown that high potassium levels have a negative influence on THC production,4 which would correlate to the general belief that while hemp crops uptake more potassium than phosphorous, the reverse seems to be true for drug and seed cannabis crops.2 A study on how to minimize THC levels in hemp crops showed that THC levels in newer leaf growth decreased as nitrogen levels were increased.5 As no THC measurement was taken from floral clusters we can only speculate that the same would likely hold true in buds. This would also explain the good results that most growers have flushing their plants, as nitrogen is the nutrient most easily flushed from the soil.


Companion planting
Much research is still needed on the interrelationships of plants in the garden. Little is known about common vegetable garden plants effect on each other, let alone how they may react with cannabis.
Growing certain plants in proximity to each other has been documented to cause noticeable effects on growth, both positive and negative. The main companion plant that has attracted interest with underground marijuana researchers is stinging nettle (Urtica dioica) which has been said to increase essential oils in many plants.6
Breeding for potency
Marijuana is unique from an evolutionary standpoint in being the only plant in history that in some cases has been grown and bred for over two decades under nothing but artificial light. It is very likely that there have already been some genetic changes that have taken place as a result of this. All plants, especially cannabis, will quickly adapt to a new habitat by adding or dropping traits over successive generations. With breeders doing potentially as many as three or four generations per year, over 20 years there is great opportunity for drift from original genotypes.
Some "oldtimers" of the cannabis community have theorized that the use of high pressure sodium (HPS) light as a sole source of lighting has resulted in unconscious selection for lower THC parents during breeding.7 This theory is based on the assumption that ultraviolet light is a large causal factor in the plants production of THC. As HPS lights produce little in the way of UV, the lower potency plants could look the most vigorous in early selections (before flowering) as they would have a genetic advantage over high THC plants (less wasted energy).
A common way of conducting a breeding program where space is limited is to start large seed lots and then select the best individuals for flowering. Vic High and others have done some preliminary research into creating high UV environments by adding tanning or medical UV lights to their regular lighting for early seedling selections.8 As most Dutch breeding is done behind closed doors it is unknown whether this is used by any breeders in Holland.

Delving through the history of marijuana cultivation you will find a myriad of techniques used to supposedly increase THC production. Much of this is little more than hippie folklore, but over the years some techniques have appeared which seem based on some amount of science.
Although some of the younger growers these days may never have used a metal halide light, many of the older set still swear by them as a complement to high-pressure sodiums in the flower room. With the advent several years ago of the Son-Agro HPS bulbs and others like it, which offer a higher amount of blue in the spectrum than standard HPS, many growers have felt that that they can do away with metal halides altogether. Growing strictly under sodiums has its advantages in terms of yield per watt, but is still lacking as far as a balanced spectrum when compared to a mix of HPS and halide.
Anyone that has ever seen a mixed light garden can testify that the healthiest, most crystallized buds occur where the two spectrums overlap. Again this brings us back to the UV factor, as metal halide bulbs emit a fair amount of UV while HPS emit almost none. Most growers employing halides in conjunction with HPS do so at a 2:1 HPS:halide ratio. Many growers, especially those restricted to one light, have been having good success using one of the new enhanced metal halide bulbs such as Sunmaster, which have a more balanced spectrum than either sodium or regular halide alone.
Glass and plastic materials used in greenhouses and air/water cooled light reflectors will block most useful wavelengths of UV from reaching plants. Luckily, recent research has shown that allowing UV to enter the greenhouse has many advantages on non-cannabis crops, and so some European greenhouses are beginning to switch to UV transparent glazing materials. Trade names for some of these products are Planilux, Diamant or Optiwhite. Plastic made from polymethylmethacrylate (PMMA) also transmits UV-B (the type that we are looking for). Traditional greenhouse coverings such as polyvinyl chloride (PVC), fiberglass, polycarbonate or regular glass allow little if any UV-B transmission.9
Harvesting in the morning ensures that your plant will be at peak THC content, as cannabis has shown THC fluctuations peaking in morning and dropping during the day. Some growers leave their lights off for several days before harvest to increase potency. This seems to have some scientific validity as light has been shown to degrade THC, hence the morning peaks. As light is the degrading factor and the plant still has the ability to manufacture THC during darkness, leaving the lights off for a day or two before harvest likely utilizes the plants stored potential for THC conversion without any opportunity for it to be degraded into cannabinol (CBN) and other breakdown products.8
Your magnifying glass is your friend.Traditionally marijuana has been harvested when the pistils die and the calyx starts to swell into a false seed pod. These days the best growers are getting much more detailed in their harvesting criteria. They take a close look at the trichomes themselves to judge peak harvest. Evidence that this is the only real way to tell peak maturity is in Sagarmatha's strain Matanuska Tundra, which ripens resin glands while most pistils are still alive and white. This seems an odd twist of evolution but proves that the pistil color and ripe glands do not necessarily have any correlation.

A small 25x or more pocket microscope, which can be picked up inexpensively at any electronic store, works well for taking a closer look at trichome development. What we are examining are the capitate stalked glandular trichomes, which will be a round gland head supported on a stalk. The coloration of these gland heads can vary between strains and maturity. Most strains start with clear or slightly amber heads which gradually become opaque when THC levels have peaked and are beginning to degrade. Regardless of the initial colour of the resin head, with careful observation you should be able to see a change in coloration as maturity levels off.
Some cultivators wait for about half of the heads to go opaque before harvest to ensure maximum THC levels in the bud. Of course nothing tells the truth more than your own head, so try samples at various stages to see what's right for you. While you may be increasing the total THC level in the bud by allowing half of the glands to go opaque, the bud will also have a larger proportion of THC breakdown products such as CBNs, which is why some people prefer to harvest earlier while most of the heads are still clear.
Indica varieties usually have a 1-2 week harvest window to work with, while Sativas and Indica/Sativa hybrids may have a much longer period to play with.
Kali Mist: It looks good, but does it have phat trichomes?
With the growing popularity of personal hashmaking through precision screening, many growers are starting to pay closer attention to the development of glands. The use of different size screens to separate glands of different sizes can only broaden our knowledge of the subtle nuances of trichome quality.
Growers using the same clone line over many crops have an excellent opportunity to play with some of these different techniques, as the main variable will be the environment, not the plant. Keep in mind that different strains may react very differently to the same techniques so be careful about drawing general conclusions.
Marijuana growers must look closer at their crop than the average farmer to achieve a premium product. Rows upon rows of beautiful plants are of no use if they do not glisten with the THC-laden trichomes that are the object of our quest.
Nurture your trichomes and feed your head!




Marijuana has been around for a long while. Its source, the hemp plant (cannabis sativa), was being cultivated for psychoactive properties more than 2,000 years ago. Although cannabis contains at least 400 different chemicals, its main mind-altering ingredient is THC (delta-9-tetrahydrocannabinol).The amount of THC in marijuana determines the drug’s strength, and THC levels are affected by a great many factors, including plant type, weather, soil, and time of harvest. Sophisticated cannabis cultivation of today produces high levels of THC and marijuana that is far more potent than pot of the past. THC content of marijuana, which averaged less than 1 percent in 1974, rose to an average 4 percent by 1994.
For the highly popular form of marijuana called Sinsemilla (from the Spanish "without seeds"), made from just the buds and flowering tops of female plants, THC content averages 7.5 percent and ranges as high as 24 percent. As for hashish, a resin made from flowers of the female plant, THC levels may be five to ten times higher than crude marijuana’s.
 

bshdctr

Well-Known Member
Hovering-
Awesome to see your buds make an appearance on the latest episode! MAN those GQ x JTR buds were fat for a l gallon flower pot..
 

nugbuckets

Well-Known Member
001.jpg

just got my "test" order from Sow Amazing...CQ, and Space Dawg.....ordered on 4/20 when i couldn't get through to attitude......two packs, with shipping to the upper mid-west, 9 day delivery.....$100 total with promo, that they gave me themselves.....i forgot to enter it!......my total was $116......they only charged me $100....

....they won me over.....ordering JTR, Chernobyl, Ripped Bubba, Querkle, TimeWreck, and they throw in Qush for free....not bad.....
 

hovering

Active Member
Hovering-
Awesome to see your buds make an appearance on the latest episode! MAN those GQ x JTR buds were fat for a l gallon flower pot..
Thanks :-)

The GQxJTR isn't going away, it is too good (just not 'elite' in my book). I am making sure that the phenos survive in the medical community if I can't keep them.
 

TorontoGQ

Well-Known Member
Excellent Article/Posting .....See this is what this weed nerd forum is about......Education to broaden our minds and outlooks on things about growing a plant we love.....Not whether or not a breeders strains are from seed or clone only.....really who cares as long as the end product is proper proper.....
 
Status
Not open for further replies.
Top