Planing on building an indoor grow show? Let me design it for you on autocad first!

[Dragon'sHoardSeeds]

You still think I'm a fraud Scoobydoobydoo?

 

[Dragon'sHoardSeeds]

There wasn't enough clearance in the room to put the fans inside. Does anyone know if rain could make these fans short out?

 

[ScoobyDoobyDoo]

You still think I'm a fraud Scoobydoobydoo?

Why do you continue to talk shit? And to answer your question...yes actually. Based on your designs, comments, and recommendations I don't think you should be giving advice to anyone.

 

[Dragon'sHoardSeeds]

If you think you can do better or have recommendations on what products to use or a different way to set it up then please speak up.

 

[Dragon'sHoardSeeds]

Why do you continue to talk shit? And to answer your question...yes actually. Based on your designs, comments, and recommendations I don't think you should be giving advice to anyone.

You started talking shit first for no apparent reason. Just because someone is new doesn't mean they don't know what they are doing.
I'm an original Overgrow member where my knowledge was common Knowledge.

https://www.rollitup.org/marijuana-plant-problems/528884-hermies-hermies-hermies.html

 

[Dragon'sHoardSeeds]

Why do you continue to talk shit? And to answer your question...yes actually. Based on your designs, comments, and recommendations I don't think you should be giving advice to anyone.

LMAO. If you think you can do better than, let's see your' design. Scoobyfuckingdoobydouchebag!

 

[ScoobyDoobyDoo]

You started talking shit first for no apparent reason. Just because someone is new doesn't mean they don't know what they are doing

you are absolutely right. but anyone that designs rooms like you do pretty much seals his own fate. there's a reason you are the only one posting in this thread...figure it out. to real growers here on RIU it is very apparant that you have absolutely no experience in designing rooms or choosing grow equipment. honestly, i kinda felt bad for you but seeing that you won't let it go i really don't care anymore. the simple fact you thought that an a/c exhausted carbon dioxide shows how very uneducated you are. the fact that you just designed a trailer that has 4 air conditioning units, 6 intake 6" fans and 6 4" exhaust fans with filters on them is basically a testament to your inability to actually design anything. it's almost funny at this point. i could go on but it's really pointless.

word to the wise...if no one posts in your thread and you continue to hang here by yourself then you might have some issues that you need to work out off the forum.

p.s. anyone looking for a real autoCad design should feel free to stop by this thread for advice from a real grower and a design that is much more professional. https://www.rollitup.org/grow-room-design-setup/519884-free-lighting-cad-program-attention.html

 

[Dragon'sHoardSeeds]

Scoobydoobydouchebag where are you? Lickin you dirty cunt now?

 

[Dragon'sHoardSeeds]

you are absolutely right. but anyone that designs rooms like you do pretty much seals his own fate. there's a reason you are the only one posting in this thread...figure it out. to real growers here on RIU it is very apparant that you have absolutely no experience in designing rooms or choosing grow equipment. honestly, i knda felt bad for you but seeing that you won't let it go i really don't care anymore. the simple fact you thought that an a/c exhausted carbon dioxide shows how very uneducated you are. the fact that you just designed a trailer that has 4 air conditioning units, 6 intake 6" fans and 6 4" exhaust fans with filters on them is basically a testament to your inability to actually design anything. it's almost funny at this point.

LMAO!

If you search for the Co2 generator he mentioned then you will see that it is meant to be exhausted outdoors to exhaust the heat that it puts off. I made it 6in intake because they are the booster fans that work at that CFM. Putting another Canfan 4in HO would have been more expensive and not necessary. If you have separate rooms then that is the way you need to treat it. Like I said if you can come up with a better way to do it then let's see it.

6 4" exhaust fans with filters on them. Okay then you saying this says to me shows that you don't know what the hell you are talking about! I separated the CFM needed in order to move the most amount of air trough the room. Because the filters I chose are not inline filters!

word to the wise...if no one posts in your thread and you continue to hang here by yourself then you might have some issues that you need to work out off the forum.

p.s. anyone looking for a real autoCad design should feel free to stop by this thread for advice from a real grower and a design that is much more professional. https://www.rollitup.org/grow-room-design-setup/519884-free-lighting-cad-program-attention.html

By the way scoobydoobybouchebag, this isn't autocad. It's an inferior program that they give away for free. Because it sucks!
Maybe you should act like a grown up instead of a little two year old and say your sorry!

If anyone else think that this douchebag is correct than speak up and I will not post again.

 

[Dragon'sHoardSeeds]

If anyone knows a cheaper way to cool these rooms via central air. Then please speak up.

Okay, here's Leroy's awesome (and rather expensive) shipping container grow show.
This shows what it should look like when growing from seed to pick a mother plant.

View attachment 2197879

If anyone wants to view these drawings in 3d then download the DWG True view
and email me. [email protected]

Here's the products I designed it after

6 of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=TR2X8AA&eq=&Tp=
8 of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=COGCRBII05&eq=&Tp=
16 of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=COGC15&eq=&Tp=
6 of each of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=AEFCF04HO&eq=&Tp=
http://www.bghydro.com/BGH/itemdesc.asp?ic=AEFSC062&eq=&Tp=
http://www.bghydro.com/BGH/itemdesc.asp?ic=AOCCF033&eq=&Tp=
http://www.bghydro.com/BGH/itemdesc.asp?ic=AFAAIFHC06&eq=&Tp=
and 4 and 6 inch ducting
4 of these:
http://www.lowes.com/pd_317019-2251-LRA127CT1_4294749561+4294830825+4294803701_4294937087_?productId=3199365&Ns=p_product_qty_sales_dollar|1&pl=1&currentURL=/pl_120000_4294749561+4294830825+4294803701_4294937087_?Ns=p_product_qty_sales_dollar|1&facetInfo=Window|12000.0
12 of these P.L. Midi Reflectors:
http://www.altgarden.com/lighting/reflectors/pl-reflectors-with-rail-socket-2.html
12 of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=HLRBMH04DL&eq=&Tp=
4 of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=HLRBHPS04DL&eq=&Tp=
6 of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=HLBADILT06240D&eq=&Tp=
yes they work for 400W bulbs too.
2 of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=HLIFT5ML28&eq=&Tp=
4 of each of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=PRTRAYEJP&eq=&Tp=
http://www.bghydro.com/BGH/itemdesc.asp?ic=PRTRAYEJP&eq=&Tp=
http://www.bghydro.com/BGH/itemdesc.asp?ic=PRSEEDRM32&eq=&Tp=
http://www.bghydro.com/BGH/itemdesc.asp?ic=PRDOMETNGW&eq=&Tp=
2 of each of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=PRHM2&eq=&Tp=
http://www.altgarden.com/propagation-rooting/heat-mats-and-thermostats/digital-temp-controller-for-heat-mat.html
and two 24"x24" tables that are 30" high

My puter's being a piece of fecal matter and I had to reboot. Here's what the flower room trays should look like when growing from clones.

View attachment 2197995

You'll need 32 of these:
http://www.bghydro.com/BGH/itemdesc.asp?ic=COGCRBII03&eq=&Tp=

If anyone knows a cheaper way to cool these rooms via central air. Then please speak up.

 

[ScoobyDoobyDoo]

If anyone knows a cheaper way to cool these rooms via central air. Then please speak up.

i thought you were the designer though? i mean, it seems pretty logical the HUGE errors you have made in this design. plus if you can't figure out how to cool that space without 4 air conditioners then what's the point of getting you to design a room. i'm not even getting into the clusterfuck you made out of the intake and exhaust fans. i literally can't stop laughing.

 

[patrickkawi37]

im confused? if you got 4 acs.. why do you have 6 inline fans? again why do you need 6 inline fans? wtf. and unless that air is "cool" that your blowing across them, i dont care if you got 16 of those bitches it isnt going to do anything but waste electricity

 

[Dragon'sHoardSeeds]

im confused? if you got 4 acs.. why do you have 6 inline fans? again why do you need 6 inline fans? wtf. and unless that air is "cool" that your blowing across them, i dont care if you got 16 of those bitches it isnt going to do anything but waste electricity

Because you need Fresh air, Duh. I agree. If the air from outside is too hot then you use your' A/Cs and take in fresh air when you need it. If the air is to cold then you need a heater. Trust me guys I am one smart son of a bitch. and I have been through this over and over again. Your fan controllers will not take in to much air when your A/C is running. If it is too hot outside then put your fans on a on/off timer that will exchange the air about every hour. The way I have it set up you only need to run the fans for 2 minutes to refresh the air. It's common since. I think I'll design a system with one exhaust and two intakes per room. I'll just have to put extra ducts and bends in the intake, which will reduce the amount of CFM. Like I said if anyone has any input too improve the design than let me know please.

 

[Dragon'sHoardSeeds]

i thought you were the designer though? i mean, it seems pretty logical the HUGE errors you have made in this design. plus if you can't figure out how to cool that space without 4 air conditioners then what's the point of getting you to design a room. i'm not even getting into the clusterfuck you made out of the intake and exhaust fans. i literally can't stop laughing.

If you were as intelligent as I am then you would realize that they are not errors.

 

[Dragon'sHoardSeeds]

I don't mean to seem arrogant. But I really do have this down to a science. Please stop slandering me and make any suggestions that you would think would improve the design. I will take them in consideration and if I deem them logical then I will adjust my designs to fit.

 

[Dragon'sHoardSeeds]

i thought you were the designer though? i mean, it seems pretty logical the HUGE errors you have made in this design. plus if you can't figure out how to cool that space without 4 air conditioners then what's the point of getting you to design a room. i'm not even getting into the clusterfuck you made out of the intake and exhaust fans. i literally can't stop laughing.

Just like everyone else I don't know everything. That is why I ask people with HVAC experience to speak up and help too improve the design.

 

[ScoobyDoobyDoo]

You started talking shit first for no apparent reason. Just because someone is new doesn't mean they don't know what they are doing.
I'm an original Overgrow member where my knowledge was common Knowledge.

https://www.rollitup.org/marijuana-plant-problems/528884-hermies-hermies-hermies.html

wow, you started that thread on 3 weeks ago and not a single person responded to it. you seeing a pattern here?

By the way scoobydoobybouchebag, this isn't autocad. It's an inferior program that they give away for free. Because it sucks!
Maybe you should act like a grown up instead of a little two year old and say your sorry!

If anyone else think that this douchebag is correct than speak up and I will not post again.

i assumed it was autocad because that was the title of your thread. i guess you just admitted to lying.

Because you need Fresh air, Duh. I agree. If the air from outside is too hot than you use your' A/Cs and take in fresh air when you need it. If the air is to cold then you need a heater. Trust me guys I am one smart son of a bitch. and I have been through this over and over again. Your fan controllers will not take in to much air when your A/C is running. If it is too hot outside then put your fans on a on/off timer that will exchange the air about every hour. The way I have it set up you only need to run the fans for 2 minutes to refresh the air. It's common since. I think I'll design a system with one exhaust and two intakes per room. I'll just have to put extra ducts and bends in the intake, which will reduce the amount of CFM. Like I said if anyone has any input too improve the design than let me know please.

where to start? i really don't even know. i feel like i'm over here doing your job for you. couple questions...what controller is going to allow you to manage multiple a/c units and fans on a single unit? why not use a single minisplit or dual minisplits on the same compressor? if you have a ton of a/c then why not seal the room? you don't need fresh air if you have Co2. how are you gonna run ducting to the exhaust fans when they all have filter on them? are you REALLY mounting fans on the outside of this thing? why do you have SO MANY fans? why do you have SO MANY carbon filters? anyone with design or grow experience would know that you don't want the flower room at the entrance. how are you supposed to get to you propogation room or drying room when the lights are off in flower? for safety reasons the doors should always open inward...that's design common sense. i could keep going but this is boring as hell.

If you were as intelligent as I am then you would realize that they are not errors.

i think we already established how flawed your designs really are.

I don't mean to seem arrogant. But I really do have this down to a science. Please stop slandering me and make any suggestions that you would think would improve the design. I will take them in consideration and if I deem them logical then I will adjust my designs to fit.

you have the art of bullshit down to a science. that's for sure.

 

[Dragon'sHoardSeeds]

wow, you started that thread on 3 weeks ago and not a single person responded to it. you seeing a pattern here?



i assumed it was autocad because that was the title of your thread. i guess you just admitted to lying.



where to start? i really don't even know. i feel like i'm over here doing your job for you. couple questions...what controller is going to allow you to manage multiple a/c units and fans on a single unit? why not use a single minisplit or dual minisplits on the same compressor? if you have a ton of a/c then why not seal the room? you don't need fresh air if you have Co2. how are you gonna run ducting to the exhaust fans when they all have filter on them? are you REALLY mounting fans on the outside of this thing? why do you have SO MANY fans? why do you have SO MANY carbon filters? anyone with design or grow experience would know that you don't want the flower room at the entrance. how are you supposed to get to you propogation room or drying room when the lights are off in flower? for safety reasons the doors should always open inward...that's design common sense. i could keep going but this is boring as hell.



i think we already established how flawed your designs really are.



you have the art of bullshit down to a science. that's for sure.

You are fucking retarded and you have absolutely no Idea what you are talking about. I stated that the program you suggested was autocad which isn't. And yet you clammed was Autocad. I already told you, I have so many fans because splitting the need CFM into separate fans moves the most amount of air out of the room. And if odor control is a problem then it wouldn't make much since to have
one or more of the fans unfiltered!

https://www.rollitup.org/grow-room-design-setup/519884-free-lighting-cad-program-attention.html

I just got a like on this thread! And I've already have had 4-5 people asking to me to design their room/s
All you are doing is proving to people what a fucking douchebag you are! You should be banned from this
forum! This guy is way too stupid to even understand what I am talking about. like I said if you can design
a better room than lets see it!

 

[Dragon'sHoardSeeds]

Scoobyfuckingdoobydouchebag, Where are you? Trying to suck your own cock now?

This guy is soo suffering from envy! Everyone report this piece of fecal matter and get him banned!
He ^ is what everyone is talking about when they say these forums are full of assholes!

 

[Dragon'sHoardSeeds]

• you don't need fresh air if you have Co2. how are you gonna run ducting to the exhaust fans when they all have filter on them?
  
  
  
  ​
  
  
  
  

Yes you don't need fresh air if your Co2 generator burns O2 and turns it into Co2. But I don't even think extra Co2 is necessary. The fresh air from outside is way better than closed in rooms. And if you are not smart enough to see how I will make one exhaust fan with two carbon filters on it, then just what and see. You fucking stupid piece of shit!