Advanced Nutrients Sensi Grow A+B Help?

mikebass1

Well-Known Member
Just bought Sensi Grow part A+B

directions say 4ml per Liter every week

i will be watering out of a 1 gal milk jug.. so accordingly to the websites chart

i will need 0.54 fl oz of solution per jug? should i put 0.54 of both A & B into the jug making it 1.08 ? Or seperate them?

first time i'm doing this so.. i'm a little confused, i just dont wanna waste nutes or perhaps kill anything. lol

any input would be appreciated.:lol:
 

Sensibowl

Active Member
Just bought Sensi Grow part A+B

directions say 4ml per Liter every week

i will be watering out of a 1 gal milk jug.. so accordingly to the websites chart

i will need 0.54 fl oz of solution per jug? should i put 0.54 of both A & B into the jug making it 1.08 ? Or seperate them?

first time i'm doing this so.. i'm a little confused, i just dont wanna waste nutes or perhaps kill anything. lol

any input would be appreciated.:lol:
DO not put A&B together in the same jug. You should use them separately. And obviously, you want to use Grow during the veg cycle and Bloom during the flowering cycle.

Mix them separately, but use them together - i.e. Grow nutrients during Grow, Bloom during Bloom.

Make sense? If not, call AN. Their customer service is super supportive.
 

jimmy1life

Well-Known Member
Ive never even used sensi grow but Sensi I kno you do but you are confuseing there its supposed be mix PART A into the water then stir it then same amount of PART B right. Maybe not But with GMB thats how i applied all 3 in one hit.
 

hooked.on.ponics

Well-Known Member
Okay, here's a bit more explanation than perhaps is really necessary but I find if I understand the "why" something is done a certain way it makes it easier for me to remember how to do it.

The reason that base nutrients come in 2 or 3 parts in liquid solution starts with the fact that water is heavy. The heavier something is, the more it costs to ship it. The bigger a jug is the more room it takes up on a shelf and that means more shelf space, more storage space in the warehouse, and so on. All that costs money. So the smaller and the lighter something is the better it is for the customer.

To get the jugs smaller and lighter, they have to put cram more nutrients into the same liter bottle. But you can only do so much cramming before no more will "fit". If you go too far the nutrients start to grab onto other nutrients in the solution and bind together as a insoluble salt. It's like how you can add salt or sugar or something to a glass of water. It will dissolve but if you keep adding more and more you'll reach a point where no more will dissolve. Well when you start talking about fertilizers you're talking about a lot of different salts in the same glass of water and some of the ingredients in those different salts are strongly attracted to each other and want to hook up. If you don't have enough water to keep those ingredients dissolved they bind up, fall out of solution as crud at the bottom of the bottle, and won't dissolve back no matter what you do.

Obviously that's bad, since your plants can really only consume nutrients in the soluble liquid form. If they bind up, they're useless.

A full nutritional base nutrient contains enough different nutrients that if you have everything in one bottle you have to have a crapload of water to keep them all soluble. Buuuuut, if you divide them up so that the ones that are most strongly attracted to each other are in two or more different bottles, you can use a LOT less water, make the nutrients a lot more concentrated, and give the customer a product that costs less to ship to the store, takes up less room on the shelf, and thus costs a lot less at the register (not to mention being a hell of a lot lighter to lug home).

But if you mix an A & B nutrient together without more water, you'll instantly get those highly-attracted ingredients hooking up and falling out of solution.

So what people mean when they say you can't mix them together is that you can't mix them together at the concentration they come at in the bottle.

You DO WANT to mix them together. The way you do that is in water. So say you're making up a gallon of nutrients to give your plants. You get your gallon jug, fill it with your water, and then you add the nutrients to it one by one. So you'd measure out the right amount of A, pour that into the water (avoid splashing), and then stir it up really well. Then you measure up your B, pour that into the water that already has the diluted A in it, and stir that up. Because you've diluted each thing before you added the next, you don't have any of the ingredients "hot" enough to grab onto something else and drop out of solution.

Once you've mixed everything you're going to use into the jug, you feed your plants - again, avoid splashing. If you get nutes on your plants you can "burn" them.
 

patlpp

New Member
Just bought Sensi Grow part A+B

directions say 4ml per Liter every week

i will be watering out of a 1 gal milk jug.. so accordingly to the websites chart

i will need 0.54 fl oz of solution per jug? should i put 0.54 of both A & B into the jug making it 1.08 ? Or seperate them?

first time i'm doing this so.. i'm a little confused, i just dont wanna waste nutes or perhaps kill anything. lol

any input would be appreciated.:lol:
@Phonics above has it right on: Put your A part 1/2 oz in first, stir, add part b 1/2 oz, stir. A word of caution though when you use the calculator. There is a note on the upper portion telling you for GROW that you should use 1 ml/l for cuttings, 2ml/l for small plants and 4ml/l for mature. So I would say only go full blast the last week of veg. Yet that statement is not on the bottles
 

hooked.on.ponics

Well-Known Member
That's an excellent point. I went through my backissues of Rosebud a couple months back when I first noticed that 1ml/L, 2ml/L, and 4ml/L section on their fold-out chart and noticed that their first charts didn't have that at all. It's still not terribly prominent. It's one of those "all the old growers know this without being told" kind of things that can be hard to remember to teach to new growers sometimes.

The list of stuff that isn't on the bottles would fill a book, really. There's only so much they can put on a label as there's only so much room. At a certain point I'm sure they just have to say, "well we've done what we can, the rest is up to the grower to learn what they need to be doing."

They've really done some amazing stuff like the whole pH Perfect technology and so on that makes it incredibly simple to grow really well even if you're brand-new to hydroponics but I think there's always going to be an element of knowledge and skill required on the part of the grower.
 

Sensibowl

Active Member
That's an excellent point. I went through my backissues of Rosebud a couple months back when I first noticed that 1ml/L, 2ml/L, and 4ml/L section on their fold-out chart and noticed that their first charts didn't have that at all. It's still not terribly prominent. It's one of those "all the old growers know this without being told" kind of things that can be hard to remember to teach to new growers sometimes.

The list of stuff that isn't on the bottles would fill a book, really. There's only so much they can put on a label as there's only so much room. At a certain point I'm sure they just have to say, "well we've done what we can, the rest is up to the grower to learn what they need to be doing."

They've really done some amazing stuff like the whole pH Perfect technology and so on that makes it incredibly simple to grow really well even if you're brand-new to hydroponics but I think there's always going to be an element of knowledge and skill required on the part of the grower.
I'm loving the pH Perfect 2-part base nutrients. And I agree that most growers know about the dosages, but the newbs still need things to be explicit. I know it would have helped me in the beginning...
 

Sir.Ganga

New Member
Bottle instructions are basically a guideline of use. The purchase of a couple of meters like PH and PPM is a much better way of measurement than any bottle instructions. Use their instructions to set up a base line then using your meters dial in the range you want. 200-300ppm for seedlings,400-900ppm for different stages in veg, and 900-1200ppm for full grown or flowering girls.

Good Luck
 
Top