Hi, I'am still in the throws of building my 'mini-cab' .. and still need to get some 3.7" Aluminium Ducting (getting some is much harder than I thought) ..to connect up the DIY 3.7" Cool-Tube. Basically and in short : I have 2 air-rigs.. 1) cooling the cool-tube , 2) venting the cab connected to the Carbon Filter - main exhaust...
I've figured that I should be able to run CO2 in here.. I also have a 250w Lumatek Dimmable Ballast in there so if when I shut the main exhaust off the temps get that bit too high I can run the 250w Lamp at either 175w or 150w (if necessary) ..
^ I have this mini-CO2 fish tank canister, and am unsure if it'll be enough for the size of this cab...or for how long it will last ???
***** ANYONE WHO'S CLUED UP ON "CO2" ETC.. PLEASE HELP !!! *****
I like to make my cabs as professional as possible...So I really want to do this properly despite the small size of this unit, I'll have 1X Scrogged & lST'd plant in a 5L Res.. I'll find out the exact measurements of the Cab...cos no doubt I'll need to work out PPM etc..
I also help this thread becomes useful to other on RIU members that wish to try their hand at a professional install (no matter what size)
Hope ya'll like the pics so far.... Below I've added a LINK to my thread where the above Cab. is made more or less from scratch! Please feel free to take a look and add any productive comments etc....
https://www.rollitup.org/grow-room-design-setup/551472-ztelthys-100w-hps-tv-cabinet.html
As always +REP for all the best answers and most helpful/useful comments etc.. - ZTELTHY