Why is the EC so high? Who is wrong? need a professional here please!!

S

ste147

Well-Known Member
Right everyone, here is the problem.

I have Soft water so my EC is 0.1

I add 300 ml per 100 litres of Canna Coco A&B.

250 ml per 100 litres of Canna Boost (canna says i can use upto 400 ml per 100 litres)

150 ml per litre of Advanced Nutrients sensical bloom. (Advanced Nutrients says i should use 200 ml per 100 litres)

My EC rockets to 2.4!!!! is this too much?

Does anyone know a good formula to use to keep my EC under 2.0 as this information i believe is false and way too high.

BTW this is only week 2 of flower. thanks all.
 
H

Hemlock

Well-Known Member
ste147 said:
Right everyone, here is the problem.

I have Soft water so my EC is 0.1

I add 300 ml per 100 litres of Canna Coco A&B.

250 ml per 100 litres of Canna Boost (canna says i can use upto 400 ml per 100 litres)

150 ml per litre of Advanced Nutrients sensical bloom. (Advanced Nutrients says i should use 200 ml per 100 litres)

My EC rockets to 2.4!!!! is this too much?

Does anyone know a good formula to use to keep my EC under 2.0 as this information i believe is false and way too high.

BTW this is only week 2 of flower. thanks all.
Click to expand...


Yes it is to high add more water till you get to 2
 
Sir.Ganga

Sir.Ganga

New Member
I run a max of 1800 on my most aggresive girls. 1000 - 1200 ppm starting flower. If you want to use that formula you need to figure out the ratio's of each additive and adjust it accordingly to bring your ppm to the point you want.

Are you really making 100 litre batches? Do you have meters? Do you have a grow bible? All good things to have.

Mix only what you need, record everything and eventually you will have a schedule that works for you.

http://www.kindgreenbuds.com/cannabis-grow-bible.html this might help

Good Luck
 
S

ste147

Well-Known Member
Sir.Ganga said:
I run a max of 1800 on my most aggresive girls. 1000 - 1200 ppm starting flower. If you want to use that formula you need to figure out the ratio's of each additive and adjust it accordingly to bring your ppm to the point you want.

Are you really making 100 litre batches? Do you have meters? Do you have a grow bible? All good things to have.

Mix only what you need, record everything and eventually you will have a schedule that works for you.

http://www.kindgreenbuds.com/cannabis-grow-bible.html this might help

Good Luck
Click to expand...
wow u feed quite high, i make 100 litre batches at a time on an auto feed yes, im sure if i pulled 50ml off each mix i wud prob bring the ec down considerably. so is it true that your roots can take in excess of 2.0 ec fine? thanks for your help
 
Closetgardner

Closetgardner

Well-Known Member
SO WHERE IS MY PLANTS REDLINE? HOW HIGH CAN MY NUTRIENT SOLUTION GO?
The optimal nutrient strength for your plants will depend on 3 things – the age of your plant, the type of plant and individual variations amongst plants.
For example most older ( more than 4 weeks old ) fast growing plants can safely handle nutrient strengths up to 1200 PPM ( 2.4 EC ) once they are past the seedling or juvenile stage. Some individual plants can handle much higher concentrations than this - up to and over 2000 PPM ( 4.0 EC )!
The other way to get your plants to safely handle larger amounts of nutrients is to use a 3rd generation nutrient that incorporates ionic channelling technologies, such as Dutch Master GOLD NUTRIENT. These technologies allow for a typical plant to handle much higher nutrient strengths than normal. A plant that could handle only 1200 PPM ( 2.4 EC ) on a regular nutrient can easily handle 1600 PPM ( 3.2 EC ) with an ionic channelled nutrient like Dutch Master GOLD. Currently only Dutch Master GOLD NUTRIENT has this ionic channel technology.
The best way to tell if you have reached your plants maximum nutrient concentration ( the red line ) is when you start seeing the very tip of your leaves turn brown or yellow. This often looks like a small burn ( which it is ). Once you see this you know you have reached your plants maximal nutrient strength.
Once you know your plants red line or nutrient strength limit, it is a good rule of thumb to not let the nutrient concentration get more than 150 – 200 PPM beyond this ( 0.3 – 0.4 EC ). Hope this helps. Its from Dutch masters, it's the best explanation I can find.
 
Cocofeind

Cocofeind

Member
Add your addatives then test ec and only then add your main nutrient. add in smaller amounts to desires ec but like said earlier half strength sometimes even 1/4 strength.
 
superstoner1

superstoner1

Well-Known Member
Cocofeind said:
Add your addatives then test ec and only then add your main nutrient. add in smaller amounts to desires ec but like said earlier half strength sometimes even 1/4 strength.
Click to expand...
ass backwards. main nutes are always the first added. additives are just that, and are to compliment the main nutes. and some can lockout mains if mixed improperly.
water, nutes, additives, ph. in that order always.
 
S

ste147

Well-Known Member
Closetgardner said:
SO WHERE IS MY PLANTS REDLINE? HOW HIGH CAN MY NUTRIENT SOLUTION GO?
The optimal nutrient strength for your plants will depend on 3 things – the age of your plant, the type of plant and individual variations amongst plants.
For example most older ( more than 4 weeks old ) fast growing plants can safely handle nutrient strengths up to 1200 PPM ( 2.4 EC ) once they are past the seedling or juvenile stage. Some individual plants can handle much higher concentrations than this - up to and over 2000 PPM ( 4.0 EC )!
The other way to get your plants to safely handle larger amounts of nutrients is to use a 3rd generation nutrient that incorporates ionic channelling technologies, such as Dutch Master GOLD NUTRIENT. These technologies allow for a typical plant to handle much higher nutrient strengths than normal. A plant that could handle only 1200 PPM ( 2.4 EC ) on a regular nutrient can easily handle 1600 PPM ( 3.2 EC ) with an ionic channelled nutrient like Dutch Master GOLD. Currently only Dutch Master GOLD NUTRIENT has this ionic channel technology.
The best way to tell if you have reached your plants maximum nutrient concentration ( the red line ) is when you start seeing the very tip of your leaves turn brown or yellow. This often looks like a small burn ( which it is ). Once you see this you know you have reached your plants maximal nutrient strength.
Once you know your plants red line or nutrient strength limit, it is a good rule of thumb to not let the nutrient concentration get more than 150 – 200 PPM beyond this ( 0.3 – 0.4 EC ). Hope this helps. Its from Dutch masters, it's the best explanation I can find.
Click to expand...
nice post! thanks very much. rep added.
 
kenny ken 77

kenny ken 77

Well-Known Member
MrMeanGreen said:
1000 EC = 700ppm.

2.4 EC = 1680ppm
Click to expand...
I read recently that ppm conversions differ quite considerably between the three main continents' (U.S.-E.U.-Asia)TDS meters.And that the only true readings of all three is E.C./Ms as those are the actual base for the conversion to T.D.S. ppm meters.
 
You must log in or register to reply here.
Top