my First time with Auto's !!!

[Raisondetre]

thats my first with auto's have germinated 3 of moby dick auto . i used 2 sylvania grolux f 18w/gro florscent i know its not enough for vegging . i using clean water water from market mixed nutrients sufficiently . Using just this mixed water for watering. 13 days left with grolux i think they are growing slowly and i got metal halide 150w yesterday and set up.
first week under grolux 18 watt


question :
1:is that enough(my metal halide ) for vegging and flowering or must i buy a higher kelvin for vegging what must i do ?
2:in which day are they go to flowering ?
3:whats the situation about my plant ?

info's:
<<light<<<metal halide 150 w general electric 12,000 lumen 4200 kelvin *model ARC150/TD/UVC/742/RX7s-24

<<nutrients<<
Hesi root complex
Hesi tnt complex
Hesi supervit

<<<pot<<<
4 liter little note i changing the pots in morning with 4 liter .

<<<soil<<<

biobizz light mix ( i was extra mixed with vermiculite and worm casting )
i CANT G&#304;VE &#304;NFO ABOUT HUM&#304;D&#304;TY AND TEMPERATURE MY HYGROMETER HAVE BROKEN UP

the newest picture taken under metal halide (today) !! so 13 days with sylvania f 18 w 1 day metal halide total 14 days
i need yours feedbacks/opinion and answer!!! sorry for my bad english
thnx alot

 

[StewartWarner]

1 yes
2 there auto flower right? (yes) then 20/4 schedual asap lol or just 24 man there already flowering.
3 there streatched from the dinky light repot them up to the first leaf set if u want otherwise let em grow

 

[tyedyed60]

Its best with the autos to put them directly in their final pot as soon as it sprouts, & as for the light, Im lazy & just go 24 but some do other ways but its the simple way for me & I havent had any problems..

 

[Raisondetre]

1 yes
2 there auto flower right? (yes) then 20/4 schedual asap lol or just 24 man there already flowering.
3 there streatched from the dinky light repot them up to the first leaf set if u want otherwise let em grow

yea dude have repot now share the new pics in 5 min !! thanks alot for suggestion

 

[Raisondetre]

Its best with the autos to put them directly in their final pot as soon as it sprouts, & as for the light, Im lazy & just go 24 but some do other ways but its the simple way for me & I havent had any problems..

i go for 24!! i go directly to final pot next time, you said right thnx tyedyed60

 

[Raisondetre]

update new pic's!!!!!! stewart your right dude the roots have come out have seen the roots but i forgot to take picture about the roots

 

[Raisondetre]

some new picture's !!!!!!!!!!




close-up

 

[tyedyed60]

There looking pretty good....

 

[Raisondetre]

&#304; need a advice is is the 4 liter pots enough for final stage (moby dick autoflowering) or must i repot them to a larger pots ???

 

[Zoltan44x]

Id go with 8 - 10 liter pots. Good luck.

 

[StewartWarner]

glad to see things are going good man keep it up.

 

[cypress green]

Why use MH lights,juicy on power,use L.E.D's or giant cfl's,a lovely 300w giant dual spectrum bulb on those plants & theres no changing from daylite bulbs etc,the plant takes wot it needs wen it needs it,no heat,cheaper 2 run than HP/MH bulbs,no chopper worries or high electric bills,loadsa places 2 get them.Try 'em!

 

[brandon.]

Don't listen to Cypress Green, if you have a 150w MH, USE IT! You'll get better lumen output from your MH than from a comparable LED or CFL setup. You'll barely see a bump in your electricity (if you even do), the only thing that you'd have to worry about is heat. As long as you can keep your temps under control, you'll get a much better yield and final product from your MH. It'd be even better if you could switch to a HPS during flowering.

 

[Raisondetre]

Don't listen to Cypress Green, if you have a 150w MH, USE IT! You'll get better lumen output from your MH than from a comparable LED or CFL setup. You'll barely see a bump in your electricity (if you even do), the only thing that you'd have to worry about is heat. As long as you can keep your temps under control, you'll get a much better yield and final product from your MH. It'd be even better if you could switch to a HPS during flowering.

yea dude i know and have got electricity problems cant go over 150 watt you true ive just search the lumens which ones better which have got better lumen and etc 2 months investigating and read many articles about the cfls mh,hps,leds and choose the mh maybe its enough for flowering and vegging stage because kelvins is 4200 . in the last month about flowering can buy 3200 kelvin or 2700 hps for better result (your right) thnx for suggestion sorry for bad english brandon

 

[Raisondetre]

glad to see things are going good man keep it up.

thnx dude ..

 

[Raisondetre]

new update !!!!
iv changed the places about 1 and 3




close up!!

i dont have got any idea why is third one so thin and frail :S

 

[MrKringle]

Do u have fans on them? That'll thicken them up. Its like going to the gym for us. I guess. And, I hear autos don't like to be really fucked with. Put it in its final pot and use the biggest light YOU can afford. Their life cycle is so short any interuption can mess them up. Good luck. I'm gonna try soon as my autos show up, if they even do..

 

[Loola]

They look a bit streched. Did u added more light? How are they now?

 

[Raisondetre]

my parents catch me up but they have no idea for which plant its!!!!for a any risk i transport my plants to my friend i dont added new pics sorry about then .pics comes up in 2-3 days

 

[Raisondetre]

They look a bit streched. Did u added more light? How are they now?

no dude i dont added. same light goes on i will add new pics in 2 days