World Of Hempy

Shivaskunk

Well-Known Member
Looking at those bitches again...damn some will be 9-10 feet when flowered...lol i wish i was on my laptop id show ya a jungle cluster fuck that i had in an 8 k watt room with overgrown plants.....

You may want to top the fuck out of those right before flower too or get lots of twine and get ready to tie em down.
 

CaliMackdaddy

Active Member
Last pix of the 4x4 as a veg cab (till pre seasonal ODG). I'm thinking of turning some moms into 50/50 per/verm or 2/1, so I only have to water every 5 days or so. Hence some new clones that I just took Friday. These moms may just get stuck in veg for the upcoming season. Will post pix of the veg n bloom tents once I have them set-up.

Pix in order: Clones just transplanted to cups; 2Ls about to go to 12/12; Low shot of everything; complete 4x4 tent. Peace!!

View attachment 2498757View attachment 2498758View attachment 2498759View attachment 2498760

Forgot to add the rest of the clones from the original clip are males for my breeding project (at a later date). I take 5 of each just so I know I will get atleast one lol. Atm all 5 rooted on all of them, I got 100% on my last batch of clones :)

Edit again >.< Question to anyone that has done any breeding in hempys. Would there be any issue running males in a hempy? I personally wouldn't think there would be any difference/problem, just thought i'd check. Thanks
Beautiful cab man, plan on setting up a 2x4 very similar to it, looks like it works perfectly as well.
 

drdank50

Well-Known Member
12 weeks!!! Ya, i bet if you checked the bottom has weaved itself into a nice tight knot. Momma prolly just needs her roots trimmed back, or make a new mom. Are those fresh clones in the pic? How old are they? If they were just taken off the mom, they will flip back. That bright purple vein is wicked. Can see where you get the purpling from, very nice :)
Shaggn,

The clones shown in the pic are a week after transplant. I plan on letting them veg for another week to get them to like 9-10" tall. The plush will get about 2.5-3x in stretch, so I am shooting for about 28-30" per clone hopefully with a nice yield :) They purple up very nice as seen previously. This round, I have Qrazy Train, Plushberry, and Blue Dream Haze. Pics to follow as they progress.
 

Dr.J20

Well-Known Member
Hey yall,
of the 9 beans i started, 7 popped. 7/9 is a bit above 75% and the diesel crosses are my least fresh seeds, so i still love my mini-hempy cup methodology. All 3 purple kush, the northernberry, and 3/5 diesel crosses popped. One of the diesels that didn't pop with the rest is showing signs of pulling through and popping above the soil but she'll be off on her own under a T5...if she survives germination, she'll get thrown under my 90w ufo by herself, under 12/12--just a WTF experimental run, i'm only planning on growing out 4-6 of these (depending on sex of course). but anywho, pics soon!

I'll be chopping my headband and northernberry fuckups in the flowering room either end of this week or first of next week so I can turn it back into a nice little veg home for these new girls...and away we go! :bigjoint:

*ps. when i get my first set of true leaves I will start pic-documenting and start a thread or journal that will go up in the WoH hempy grow links thread

be easy,
Dr.J
 

smoothness

Active Member
Got the buddies ex gf in a plastic bag in a ditch huh? lol. Those plants are enormous. You should lolipop the bottom 1/3 of those monsters 10-14 days after you flip to flower bro...you wlill get chunky nugs. I would buy a fuckload of cfl as well and hang em all around the lower portions of those plants. If you do those two things you will be stoked come harvest.
i want to do the cfl but i dont know how to go about it. and trimming was hard for me... it hurt cutting them like that. and how much lower foliage would i have to trim off to lolipop it. each mother has at least 20-30 colas.. and i was thinking about putting a soccer net over them. they cant support themselves up as it is already idk how they will be able to when they flower.

and my bestfriends gf.... well lets just say i watch alot of breaking bad... jk..or am i?
 

CaliMackdaddy

Active Member
i want to do the cfl but i dont know how to go about it. and trimming was hard for me... it hurt cutting them like that. and how much lower foliage would i have to trim off to lolipop it. each mother has at least 20-30 colas.. and i was thinking about putting a soccer net over them. they cant support themselves up as it is already idk how they will be able to when they flower.

and my bestfriends gf.... well lets just say i watch alot of breaking bad... jk..or am i?
On breaking bad didnt they throw bodies in acid?
 

smoothness

Active Member
Looking at those bitches again...damn some will be 9-10 feet when flowered...lol i wish i was on my laptop id show ya a jungle cluster fuck that i had in an 8 k watt room with overgrown plants.....

You may want to top the fuck out of those right before flower too or get lots of twine and get ready to tie em down.
Topping would only make them girls bushier... 9-10 ft? Damn... My friend who has grown a few times said some of those moms are one lbers. I hope they are but I highly doubt it. I'm moving those moms to another house soon someplace noone but I know where it is. I'm wondering if I can run 6 600watters somehow on a 15 amp breaker. If not i might have to wire it straight to the breaker box on a dedicated breaker. Wondering how I can put the cfls around the room without it just wasting electricity and actually make a difference. And how do u tie it down to control height? Tie it around the top colas? Damn that's alot of twine! Any instructional help would be nice k thanks bye
 

smoothness

Active Member
yes, was hydrofluoric acid specifically.. if you ever have to use it.. the lesson learned is.. not in a bathtub, it'll eat most things, except for specific plastics :P
Yes I know. I used to twiddle with red phosphorous meth back in the day. Growing weed makes meth look like rocket science
 

jela10

Well-Known Member
I'm wondering if I can run 6 600watters somehow on a 15 amp breaker.
Smooth, got this for you regarding your wattage: You'll need 3600watts total for 6 600w lamps..
A 15 amp circuit can carry only a total of 1440 watts safely, which is 80% of the 1800 watts found by multiplying the volts times amps,15 x 120 x 80%= 1440. (2 600w lamps)
The numbers for a 20amp service aren't much more enlightening....1920 watts (3 600w lamps) and you would have to have 12gauge wiring to achieve that safely if swapping out the breaker.
Bathrooms in my neighborhood typically run 20amp services for extra appliance capacity (heaters, hair dryers, spa motors). If there is a bathroom adjacent to your grow room you could steal from that circuit through the wall. Then you could run 5 -600's max.
 

CaliMackdaddy

Active Member
Did some training, tied down the 2 tops on each so i can get some nice short bushes, first time doing it with this method.. how'd i do?


2013-01-28 17.32.49.jpg2013-01-28 17.32.54.jpg2013-01-28 17.32.58.jpg2013-01-28 17.33.03.jpg
 

smoothness

Active Member
Smooth, got this for you regarding your wattage: You'll need 3600watts total for 6 600w lamps..
A 15 amp circuit can carry only a total of 1440 watts safely, which is 80% of the 1800 watts found by multiplying the volts times amps,15 x 120 x 80%= 1440. (2 600w lamps)
The numbers for a 20amp service aren't much more enlightening....1920 watts (3 600w lamps) and you would have to have 12gauge wiring to achieve that safely if swapping out the breaker.
Bathrooms in my neighborhood typically run 20amp services for extra appliance capacity (heaters, hair dryers, spa motors). If there is a bathroom adjacent to your grow room you could steal from that circuit through the wall. Then you could run 5 -600's max.
I use 240v tho.
 

pmedicate

Member
Hey guys sorry to get a little off topic, but I'm trying to do an auto watering hempy bucket system with 100% perlite in an ebb n flow table. Ive been searching for info and grows but I'm having a hard time digging much info over the net. Can someone help me? I basically want to know how often I would have to water and if I can run a constant drip feed or something. Is it as effecient as using a hydro set up with hydroton as the medium? Thanks.
 

jela10

Well-Known Member
Singulated the nugs from the main colas tonight...some went into jars and some into paper bags (pheno differences). Can't help but share, sorry for the shitty focus....delirious tremors...you can imagine (LOL).
DSC02930.jpgDSC02932.jpgDSC02933.jpgDSC02937.jpgDSC02939.jpgDSC02942.jpgDSC02941.jpg
 

drdank50

Well-Known Member

WattSaver

Well-Known Member
Hey guys sorry to get a little off topic, but I'm trying to do an auto watering hempy bucket system with 100% perlite in an ebb n flow table. Ive been searching for info and grows but I'm having a hard time digging much info over the net. Can someone help me? I basically want to know how often I would have to water and if I can run a constant drip feed or something. Is it as effecient as using a hydro set up with hydroton as the medium? Thanks.
If you are going to run hempy style, then you'll only need to water every 2 to 3 days, (maybe daily depending upon the stage of growth). In the hempy method you're using the small rez up between waterings and you're not recycling the run-off. If you are planning on more frequent waterings to keep the perlite at a higher moisture level then skip the hempy and just let the pots drain through the bottom. There are a few examples recirculating perlite bucket systems in the past 30 pages, that may help you make a decision.
 

Moebius

Well-Known Member
Finally got round to taking a few more cuttings.



Built a couple of trolleys for my cloners, it makes a big difference not having them directly on the floor and being able to move them around easily.

 

Moebius

Well-Known Member
I've been so busy moving re-organising my grow and moving things about. Haven't really had time to update WoH on the progress of my grow.

Anyways, the Royal Cheese has grown too big but its pinched now and manageable. ... I actually threw out 3 Moms before I tasted the weed because I only wanted short plants, but that same day I tasted some of the dried and jarred Royal Cheese and it tasted like the old skool UK cheese, so Im keeping it.

I have 6 or so GDP going in 2L Hempys also. They are just doing their own thing and are beginning to bud at around 3 weeks.

Will post pics tomorrow, when light go on. .... oh, that's a point ... Ive switched over to light OFF at night to try and get some of the purple to show through on the GDP. Not sure if it will make a difference but either way the bud tastes really good.
 
Top