Best investment to increase output?

cues

Well-Known Member
Seriously though, I have recently become interested in the best way of increasing the gpw ratio and experimented with sequestered Pb as an additive. It worked great. Medium sized nugs weighed half a pound! I have given some to a mate to try but haven't seen him since. Went around to ask but there were just a load of gone-off milk bottles on his doorstep.
Damn, exact same thin happened when i experimented with the arsenic.
 

PurpleBuz

Well-Known Member
I suggest try adding some supplemental lighting with either T5 HO blue\Actinic sidelights or some MH with some blue spectrum. The T5s will have minimal heat issues compared to MH while the MH will give more lumens
 

PurpleBuz

Well-Known Member
Seriously though, I have recently become interested in the best way of increasing the gpw ratio and experimented with sequestered Pb as an additive. It worked great. Medium sized nugs weighed half a pound! I have given some to a mate to try but haven't seen him since. Went around to ask but there were just a load of gone-off milk bottles on his doorstep.
Damn, exact same thin happened when i experimented with the arsenic.
lead ? you want to smoke lead? yeeew
 

cues

Well-Known Member
Right, this time REALLY seriously!
My experiences?
No.1. Hydro.
No.2. Scrog.
3. pH
4. Strain (IMO having the strain to suit your space/grow style matters far more than having 'the latest' strain). i.e., no point in trying to scrog a true sativa in a 1x1 under a cfl.
5 temps and co2 exchange
Ahh, i can't be assed! it goes on but ain't hard That's what riu is for. Just keep tuning things until you can't be assed anymore, you're growing enough or you
have ran out of time and space.
Somewhere you will find a balance if you get 2 IMPORTANT things right. Kn, Ex and TLC levels are vital.
A deficiency of Kn and Ex will kill plants quicker than anything. An excess of either will do the world of good. One can compensate for the other to some extent. An excess of both will do amazing things.
However, low levels of both can still produce good results outdoors providing levels of TLC are kept within suitable parameters, Cannabis tends to have a fairly large range of TLC requirements but can be easily overdosed by the over-enthusiastic grower. It's probablly the no.1 cause of plant death.
 

jondamon

Well-Known Member
OP

Your problem is that 60CFM fan.

Yes definitely get a 400CFM fan. This will solve your issue.



J
 

Dwezelitsame

Well-Known Member
best thing i could think of short of magic
is genetics - nuting els i i can think of - lot of shit out der on da market cause peeps believe, an will buy

but id like to see two f2's of da same plant side by side wit any product used on one next to another - wit nutin onit
show me da diff an i will buy

most ofit just snake oil hokus pokus spend yo duckets on genetics
stop spendin on da bullshit sayin dose seeds are to much $$ are day fkn crazy
i get great results i spend on genetics

not fuckery, dats whut most addatives are, like a fishen lure - get dem to bite - all inda advertisment - was not there B 4 gotta sell it, get them to buy

an day are goud at it to


glucktoya broda

I an I
Rastafari
 

Shik

Well-Known Member
Dwez, I like you. lol

Alright, I ran a indica -sativa it was too much and too little. Although it was called Magical by some and Beautiful by others, it didn't really pass the test for me.

It is also the clone I have now running.

So - In store then, new fan, new lights, buckets, air pumps, new genetics. Man the bill adds up so fast. Cram out tripple the profit in 3 months, yet - it is the money I set aside to pay the bills next few months. Kind of an ultimatum. lol
 

Shik

Well-Known Member
My strain is called Guava OG.Or maybe flip that, I was never really sure. Its a med strain, so mainly body experience.

I forgot to mention, I bought a microscope to check trics, Digi PPM and PH meter, was doing it all by hand before.

Thanks for your opinions guys, I suppose I pretty much know what to do!

Over and out! ~ Flying sky high ~

lol
 

Dwezelitsame

Well-Known Member
pure indica gona give you a short tight plant
next time go hibrid like a OG larger fuller plant and will rock yo world

gluck
 

LBH

Well-Known Member
Lots of yield boosters out there

-more light

-co2

-scrog

-try hydro

-Study longer and harder on feeding appropriately, I use the "less is more theory" like many old timers
 

Shik

Well-Known Member
Just thought I would drop an update.

Changed from tent to room, added 400 cfm fan, 2 more 600w's, carbon filter, instead of using DWC, going with sort of a Hempy style bucket but not quite there yet.

Atm, only have 2 600w's in flower, using my third on a digi balast reduced to 300w for vegging my clones in a separate room.

Some pics!!

From this:
2012-12-07 22-39-23.391.jpg

To this!:
IMG_0043.jpgIMG_0044.jpgIMG_0045.jpgIMG_0046.jpgIMG_0047.jpgIMG_0048.jpg

Ignore my net... Lol I ran out of screws to make my grid so I just did what I could. Keeps growing though, so probably going to have to fix it.

Edit: Had to add a pic my wifey sent me. <3 her
IMG_0034[1].jpg
 

LBH

Well-Known Member
Looks good but when the lines of the screen move like that, it's not doing it's job. The lines need to be much tighter to hold the branch in position. The 2 are at war and the line should be winning.
 

Shik

Well-Known Member
Before my net was 4'x3', the strings were perfect. Now its 4'x5' and I had a friend help me do it, I figured I was going to have to redo it. =/

Also the tops are so bendy that its still training them, the next day I move them to the next line, and the next day I move to the next line.

I will revist the net though, and thanks for stopping by LBH I've actually read your tutorials long before I began. =)
 
Top