The Flying Circus

F.M.I.L.Y

F.M.I.L.Y

Well-Known Member
I am really digging the Whodat fabric pot with the Saints emblem on it!!! Maybe some small PC fans on the Top section my help with the temps or even one of those small In-Line Booster fan exhausting from the top. I am sure you will figure it out I mean look at this set up you built, it rocks!

Peace

FM
 
whodatnation

whodatnation

Well-Known Member
I gotta use what I have on hand atm. I may pull a ghetto cardboard ducting move, and just pump ac directly into the cabs... I will also think about covering the building itself in vines to provide more shade.

Thanks fam :-)


Oh, the custom fabric container,, pretty bad ass eh! If you know which trickster to get in touch with you could have one of your own :-)


100_4493.jpg
 
F.M.I.L.Y

F.M.I.L.Y

Well-Known Member
Duct tape and cardboard are golden bro, sounds like a plan with the A/C flowing right in.

This would be a better design for your Fabric Pots IMO. lol
77065 NY Giants Banner.jpg
 
Thundercat

Thundercat

Well-Known Member
LOoks awesome with the plants in there! That screen is gonna be totally full this time man, and that girl on the bottom too WOOT!
 
whodatnation

whodatnation

Well-Known Member
Great to have you on board Joz!

Hope I can help ya out, doobs.

Its going to be beyond full lol Good thing I got two dehumidifiers on hand!
 
jigfresh

jigfresh

Well-Known Member
genuity said:
time to hire some lil people,with lil picture takeing devices...haha.less pics,for a grow of this magnitude,,,,haha(magnitude),is all good.
Click to expand...
Not sure if you were talking about the magnitude I'm thinking of or not but still made me laugh. pop pop !
 
DST

DST

Well-Known Member
totally feel you on the pic front, very hard to get the whole story with a vertical grow.

And ouchy oochy ouch ouch, very very hot sir??? hope you get it dialed lad.
 
supchaka

supchaka

Well-Known Member
Im kinda cornfused what changed to make the temps go up? Your boxes and environment were already dialed in to 600's yeah?
 
Thundercat

Thundercat

Well-Known Member
So your pretty creative and handy at DIYing things Whodat, you think you would fanagle a cool tube for the light to ride up and down in the middle of? Perhaps a bracket at the top holding the tube to the ceiling with the light right in the middle, have some holes drilled around the top to allow air to be pulled in. Then at the bottom of the cool tube mount an small inline fan pulling air in through the top. Just brain storming.
 
yeps420

yeps420

Active Member
whodatnation said:
Stuffed it full of plants last night :-) 4 on the outside and a biggie on the bottom all spread eagle like.


my temps are 80f on the lower section and 90 up top,,, Ima have to come up with something... I do have 2 six inch centrifugal fans collecting dust,,, may have to rig something up... If I had more scratch on hand I would just get a nice big ac for the building,,,, probably after harvest ;-) thats assuming I get there.


Plantes!
super silver sour diesel X platinum bubba X OG kush <<<<<<< sounds crazy right?!?! :hump: x 10.
^^^ those are on the outside.
The big girl on the bottom is some seeds I made a year and a half back. She is MVK.











As some of you may know, it can be quite difficult getting good pics growing like this. One of my favorite things about growing is taking pictures, and not being able to move them is getting in the way of that... Will see how I handle this :eyesmoke:





View attachment 2681444View attachment 2681440View attachment 2681442View attachment 2681443View attachment 2681445
Click to expand...
Could it get any better. ..
Damn nice work. ..
How awesome is the training work. ..

Pure gold. .. 24 k+++

Even from the bleeder seats its a great show. ..

Pulling up a seat for this one. .. Jar in hand, popcorns hot and canna butter is melted. ..

Puff, puff, pass. ..
 
DST

DST

Well-Known Member
My thinking on my current environment and what I may change, may help your thinking who'. I have been thinking about this for a while (takes me ages to get round to some things!) Currently I have cool tubes and have oscillating fans blowing up the outsides of the cool tubes for air circulation, those are on the floor. My cool tubes pull air in from the cab environment through a 10 inch can and 8 inch fan, that also sit on the floor. That keeps the cool tube tower reasonably cool, with the only slight problem being that the second 600 in the tower is getting air that has already been pulled over the first 600, so is never as cool to the touch (you can still rest your hand on it, but you can rest you hand on a raidiator and it stil "raidiates" heat!) Anyway, at the top of the cab I have another 5 inch ruck with carbon filter attached pulling air from the top. My inlet port is at the bottom of the cab. Now, my simpleton thought. Heat rises, cool air is heavier than hot air, plants generally have wind blowing onto them from above, cool air passing over the leaves. I often have wind burn on some of the bigger fan leaves that are on branches stretching to get to the light. If air was blowing from above I don't think this would necessarily happen. My temps are normally around 25 in summer, 20 in winter, so they are not a big issue, but on hot day can go up to 30c. I would like to avoid this. The solution to all this slight misconfiguration was for me to turn everything upside down (what a pain in the ass that would be..). So have my oscillating fans attached to the roof, my inlet port pulling in cool air form outside blowing into the oscillating fan and then down into the cab, and perhaps but maybe not entirley necessary would be to have the 10 inch can above (that would be the biggest pain in the arse!!!!). Anyway, rambling and needing to finish this joint:)
 
You must log in or register to reply here.
Top