Looking to make a switch

hyroot

hyroot

Well-Known Member
What's your grow area? 4 area 51 panels will cover a 5x5 - 6x5. 4 hans panels will cover a 4x4. Apache at660 will cover a 4x4 - 5x5. 4 apache at200 will cover a 6x6. Or you can hang vertically around 32 Cree a19 globes from home depot.

those are the top led panels.

for Chinese led. Lower par.. vipar / evergrow (Nova) have a 400 watt that supposedly covers a 4x4.
 
hyroot

hyroot

Well-Known Member
PICOGRAV said:
I don't know if you could flower Afghan properly with Hans panels or the beloved Apache.
Click to expand...
other than hating and instigating arguments you base this on what......?. you are an led grower yourself. I don't understand your thinking. I would love to try apaches. But A51 and Hans are more cost effective and run less watts. Apaches are the only led lights that are able to drive their leds 100%.. Apache's have the highest par rating of any panel. I'm pretty sure Multipass is doing afghan under 4 hans panels. Hans use Cree leds too.
 
UOENO

UOENO

Active Member
Geezy101 said:
just looking for some guide with LED's. I currently run a 600w + 400w hps in flower.

what do i need to get in comparison for LED'S. im a bit confused on these lights and whats required.


here is a light on ebay.

how many of these would i need to replace 600+400 hps

http://www.ebay.ca/itm/Red-Blue-Mix-Hydroponic-LED-Panel-Grow-Light-110-225-V-/200715395710?pt=US_Hydroponics&hash=item2ebb91e27e&_uhb=1


thanks
Click to expand...
I really wanted to go LED but they cost alot plus compared to the Gavitas PRO DE 1000 made not get any LED period.

check this video out:http://www.youtube.com/watch?v=5weG40bdumo
 
TRIBUNAL

TRIBUNAL

Well-Known Member
I used the 225 Hex Band panels which were probably made in china.
I used them for the sides of the plants and CFL's for the tops.
I can't say much for the results because I made mistakes in the grow, too many variables.
However All 3 panels which were purchased by two manufactures craped out after about 5 months almost no LED's even light up anymore.
Perhaps that brand will be better though, goodluck.
 
GreenSanta

GreenSanta

Well-Known Member
i can only speak for a51 and would recommend them. usually around 700 watts of leds will match ur 1000watts hps. also i can only speak for their older models (590watts)and they grow HARD nugs
 
Mechmike

Mechmike

Well-Known Member
I agree with that. About 700 watts of quality LED is a rough equivalent to 1000 watts of quality HPS. That's one main of the reasons I use LED. HPS may produce a bit more lumens per watt but because of the absolute control over spectrum LEDs can offer much higher usable PAR light at comparable wattages. The heat issue can be a big deal in a warm climate and with high power costs which makes LED much more attractive. I also love that each LED is a light source all to itself which makes the possibilities for getting the light perfectly on target pretty interesting.
 
You must log in or register to reply here.
Top