Gomziel
Member
nice of u to offer help. but ima on the other side of the world.Nuke Em' is an OMRI certified organic product that will solve your mold problems if it is used correctly. Everything in it can be found in bread. Safe and effective at all stages of growth. I have even sprayed it on a freshly cut bud to see if it left any bad taste etc...no prolems at all!
Kills mites dead too!
Key points in using Nuke Em':
1. NEVER use with lights on. Citric acid is the reason.
2. Always make sure your plants are hydrated.
***Water 2 hours before lights out to be sure they're transpiring.
***** If your plants are locked up they are not hydrated. You want your plant transpiring well when you apply Nuke Em'. If you are not sure on this issue then flush your plant until the ppm out the bottom is 400 or less...wait 1 light cycle for them to snap out of the lock out....run water through again and be sure the ppm's are still below 500. It can increase quite a bit if your root zone is toxic. This will make a big difference in your results...this corner cannot be cut!
3. It takes 3 applications but they can be done back-to-back. Spray and let the plants dry . Then repeat this process 2 more times. This can be done in 1 lights off cycle. If your airflow is where is should be your plants could be sprayed every hour. This will kill the powdery mildew/mold.
The strength I recommend is there 1oz/32oz concentration.
I am the distributor for Washington State. If you are in the Seattle area I can get you direct pricing. I also have samples. To be clear, this is not a marketing ploy. I am just very concerned about people using harmful chemicals on their cannabis. There is no reason for it. I am a retired pharmacist and after 20+ years around chemicals taught me the less you expose yourself to the better.
I can be reached at 206-818-0844.
Craig
i will try my luck via amzon or somthing like that
tnx