Search results

i use a 600 hps for everything, if your only going to have 1 light then an hps is the way to go, if you want more blue then the sonagro bulbs are the one to get, you see a plant likes blue light for veg but it does not need all the blue light a mh produces, i find i get best results with the...

first of all get the car coolant idea out of your head, coolant is actually a worse conductor of heat than plain water, the only reason it is used in cars is to lower the freezing point of the water and to raise the boiling point and to lubricate the water pump and seals, it has no use in a grow...

as long as the room its in has the door open then it will circulate throughout the rest of the house and be fine

check my vid out http://www.youtube.com/watch?v=sjbLYNePQGA my tent is 5x5 and im running 1200 watts in it, air flow is critical in tents especially when your running big lights, tents have a tendancy to build up humidity so constant venting is almost mandatory

http://www.youtube.com/watch?v=sjbLYNePQGA check out my setup on this vid, i have 2 600's cooled with a 100 cfm fan then i have a can 9000 filter on the top of the tent with a 4 inch 180 cfm fan with a speed control so its turned down to 60-70% for the sake of noise and to make sure that i wasnt...

i like it so far, what i would do is ditch the cfl's-t5;s in favor of a 250 mh, you only need a little bit of light to grow moms and veg, and just remember, watt for watt floros and cfl;s produce more heat than hid's and an hid is easy to cool with a vented hood, i would vent to rooms seperatly...

here is my setup http://www.youtube.com/watch?v=sjbLYNePQGA im venting in to the attic also, your fan and stuff is more than adequate to cool a 600, i would put your filter up as high as you can get it then run the duct down to the hood and have the fan pulling on the other side of the hood and...

you would be way better off with 4 600's in a space that square, unless you threw a light mover in there there would be a ton of wasted space on the sides where there is not much light, here is a pic of my old flood and drain 4x8, the 7.5 foot length is good but the width will either be unusable...

ill bet this happened, you put water on them then you put the light right right down on them and it dried out the soil causing the seeds that had just poped the shell to dry out and die, i dont turn any light on until they come out of the ground just for this reason

ok dont foliar feed with lime.....baaaaaad idea, second if the plant has just been put in the pot you can take it out and shake off most of the bad soil then put it in good stuff, oh and the little bumps on the bottom of the stalk are normal, if you were to put another inch of soil around the...

how about if they did this

7 is cool, what you do is mix up your nutes then adjust ph, if you get a lot of nutes built up in the soil it will raise ph but that does not sound like thats going on here, as long as the plants look good i wouldent worry

peat moss is the shit, thats basicly what pro mix is, peat moss perlite and verniculite, i have the best results with that

i always add a littlebextra lime to the sunshine mix and then just water away, the fox farm hydroponic grow big is buffered to 6 so i havent used ph up or down once in this whole grow

i noticed the same thing, i thought i had a bunch of bunk seeds that would not germ in a towell so i tossed them in the dirt and they popped right out

i usede to do this all the time when i was in high school, i found the best places fo rpublic planting are around librarys and such where they have irrigation systems in place already, maybe a few in the local police chiefs house also

with the basic grow skills under control 200 grams is a realistic figure without co2 and sog

stressing plants is the wrong thing to do, thats old 70's folk lore....ever heard of putting a nail through the stem????? all bunk shit that was done by old growers who didnt know any better, the same goes for if you are going to chop it down and stick it in water... your only going to hurt your...

actually a dilute nute solution will do more to pull the salt buildup out of the plants, i would also consider a clearing solution like florakleen or final phase, but if those are not available to you use like a 10% nute solution to flush with

it sounds like its just a mutant, possibly from stress, i had an ice plant that grew leaf blades from half way out of its big fan leaves, it turned out fine