Search results

  1. InTheValley

    CXM22 DIY Build for 2x3 - Advice Wanted

    I use 2 of the 185-c1400s, they do just fine. Im not one to get all into the #'s of efficiency and all that crap. Efficacy is another thing, because after all, the Spectrum, and how well the Cob itself produces usable light for the plant. Because if you have everything dialed in correctly...
  2. InTheValley

    CXM22 DIY Build for 2x3 - Advice Wanted

    Hey Justchillin, I get 65 because i use a mix of 4000k 80cri and 3500K90cri, where 4000K80 is usually a 70factor and 3500k90cri is 60, so i use in-between for 65. so, if my lux is 40,000-- I DIVIDE that by 65, gives me about 615 PAR. SO, i drill a 3/8 inch hole in the Lid of my lux meter, (...
  3. InTheValley

    CXM22 DIY Build for 2x3 - Advice Wanted

    i use this one, and drilled a hole in the lid, then calibrated it with scotch tape till I get the PAR value = to lux conversion factor. ( 65 ) Sure, its not exact, and its not $126, but it gets you in the general idea of PAR and intensity to dial things in better then using nothing at all...
  4. InTheValley

    CXM22 DIY Build for 2x3 - Advice Wanted

    54 watts each cob (4) at 12 inches will roast the leafs. These cobs are no joke,
  5. InTheValley

    The far red thread

    might want to get a Sonoff timer for it. few bucks well worth it for this puck. You simply splice an extension cord, and just plug it in.
  6. InTheValley

    CUSTOM LIGHTING SCHEDULE DURING BLOOM

    we are rollin along. day 26 from seed. Front right, is 90% male, all the rest lookin female. 18 inches tall. We are on day 7 of the light cycle. ( day 5 real time ) also, scored a bean in some bagseed, which popped today and is in the cup. No clue what it is, but its awesome stuff,lol...
  7. InTheValley

    Chlorophil patterns

    calmag man, I can see it on your older leafs too. The "saw" look is usually calmag or heat/light.
  8. InTheValley

    Chlorophil patterns

    Man, try to get a LUX meter to dial it in. If your leafs dont straightn out, you might be short on Mag. Do you use calmag? You should be atleast given her 1ML per gallon, Up to 4ML half way thru flower, when u have 4 weeks left before chop, drop it back down to 1ML per gallon. Mag is very...
  9. InTheValley

    Chlorophil patterns

    light to close and might have to low humidity man, just sayin, keep eye on it
  10. InTheValley

    CUSTOM LIGHTING SCHEDULE DURING BLOOM

    yes, these have been on 12/12 since seed, but switched to 6/10 on Saturday.
  11. InTheValley

    Showing off the girls!

    llokin good man,
  12. InTheValley

    CUSTOM LIGHTING SCHEDULE DURING BLOOM

    well, i have 1 female show on the 6on 10off light schedule. Its the 1 i fimmed.
  13. InTheValley

    CUSTOM LIGHTING SCHEDULE DURING BLOOM

    I still shake my head everyday over this, would of been choppin in 2 weeks. 150 tops,
  14. InTheValley

    CUSTOM LIGHTING SCHEDULE DURING BLOOM

    here was my last run before i chopped it down due to horrible humidity problem i couldnt control. and the run before this one ended up with mold and had to trash 90g because i freaked out,lol.. 65 days from seed, 5 days into flower. 2 plants, 3 gallon fabs, I chopped it down on this day.
  15. InTheValley

    CUSTOM LIGHTING SCHEDULE DURING BLOOM

    i use Recharge, microbs, they love the molasses. Ive used this watering combination last run, but was watering 8 times a day. they loved it. I have my nutes and medium dialed in. I use Cocoloco straight.
  16. InTheValley

    Medium that would not need ANY ph adjustments?? Pro-MIX? Just water and walk away.

    man, KindSoil, and FFOF, just add water, Most RO water is 6.5.. Poland spring i know is. but most RO water can be 6.5-7.3 i think it was. KindSoil is awesome stuff. Its as easy as it gets.
  17. InTheValley

    CUSTOM LIGHTING SCHEDULE DURING BLOOM

    man, i really hate the journal section of this forum.. Im going to put the updates in this thread if thats not a problem, seein its pertaining. went to 6/10 today, here is what they look like, 500 PAR today, and started bloom nutes, so they get Recharge, Calmag, MegaCrop, and PH Perfect AN...
  18. InTheValley

    Dumb question about dimming

    cover your windows, but yeah, dimming isnt no big deal. Its not always sunny on a cloudy day.
  19. InTheValley

    CUSTOM LIGHTING SCHEDULE DURING BLOOM

    OG strains hate defoliation, so heads up on that. Ive tested it, seen 30% reduction. here is the link to my test journal, https://www.rollitup.org/Journal/inthevalley.972627/
  20. InTheValley

    CUSTOM LIGHTING SCHEDULE DURING BLOOM

    didnt get to the thread start yet. If this works out, it will take 45 days to flower a 10week strain. So knocking 25 days of the flower phase. an 8week strain will take 36 days, and a 6 weeks strain will take 27 days to finish,lol, thats pretty fast.
Top