Search results

I did soak them, also maybe had a heavier mix as I just poured some in without measuring.

After spraying with bt is it common to have alot of the pistols turn brown? sprayed at sundown.

does this combo seem right, BXEB-L1120Z-50E8000-C-D3 , forward voltage is 38.4v, max current is 2.8a, with this driver, hlg-185h-C1400b, I could power 3 strips, at 1.4A, and dim them to less?

Thanks for this, it helps and I'll get my head around it more today.

I tried looking at the how to power led thread, is there some basic way to see how many strips a driver will drive. I want to run them at low power but with the ability to increase. I have made a bunch of quantum board lights and one strip light but I was helped by others determining the strip...

Maybe I should go with a only 5000k +- strip instead of the warm white/cool white.

Thanks for the input, looking more for a 5000k, should have been more specific.

What I was thinking was for my veg area which is 108" x 40". Thinking two fixtures with 4 strips or 6, approx 50" x 20", I can make the fixture from al sheet, and attach the strips with the driver mounted on top of the fixture. I'm not really worried about the cost, just want to use my drivers...

I have a few drivers that I bought for some reason that I don't know, but if I wanted to build lights with these useing some led stripps what are my options? I have built lights but there was always the recommended driver so it was easy. Here is what I have: 1ea) HLG 240H-C1050B, 2EA) HLG...

Been using 45s and get about 2 lb per average, 3 is good. Part of the thing about larger pots is you can water less often, if your automated then no problem. My starts in 3 gallons need to be watered twice a day now, they are about 3' tall.

Just give them plain water at that age.

Why do you say that? mine take that all the time, not talking about seedling. I will alternate with plain water, but at 1500 ppm nothing here is crispy. I do agree about over feeding. I have only used the 1500 ppm measurement for the mature girls so why wouldn't my plants be burnt? Usually...

If you have a mature plant it could take 1500 ppm water, for the small ones less is better. My water is 380 from the well and I usually want to be approx 1200 for the plants. The runoff seems to be a little more generally. After a while, you need to clean and calibrate the ppm meter, it can...

I would say no nuts for a while, ideally the leaves will be pointing upward. as just mentioned, you should have a way to measure how much nutrients are in your water, and the runoff. My guess is too much, the water coming out of the pots should be 1500 ppm. This is just a estimate, but if it...

Looks to me like they are revegging, definitely spray with bt every week. I think these will go another 8 weeks +-.

For tapping or drilling aluminum wd-40 works as good / better than oil. Very easy to drill and tap with a cordless drill.

You hit the nail on the head there. i only have the one solarcure on the left side angled to the center, the uva is going on the right side. The room is 36" x 60", the fixture was approx 24" above.

I used the solar cure, Flower Power F40 (4 foot) )(it was my best run, really frosty. took the summer of for out door but getting ready to start again. I had mine on 4 hrs at mid cycle. I'm adding this too. HLG 36 UVA, going to run it 12 hrs.

I wouldn't, why is it always the woman that wants to mess with stuff.

Yes, cbd critical mass, wondering how long to let it go for? one in the front, other is a swiss cheese.