Search results

Using what I could find, I sticky-tacked some nuts to the valve floats on all the aquavalves in the veg tent. I'm hoping this fixes the problem for good. This has been the main negative to the autopots is that the aquavalves don't always work like they should. Autopot should adjust this for the...

https://www.rollitup.org/t/autopot-issues-problems-solutions-and-fixes.1097171/ I just found this post which goes over the problem I was having with my aquavalves and how to fix it. Apparently placing a washer or weight on the valve float will ensure that the valve works properly. I will test...

You can see the stem in this photo. Tonight I checked the aquavalves to make sure that they are functioning properly. The problem that occurs is the plant bases stay full of water and do not ebb & flow as designed. This was an issue I ran into last year although issue is a strong word because...

No reason, some of the plants were leaning over when I transplanted. I'll try to take a good picture of that when I get a chance. It does look like that though. The growth is crazy if you really compare both photos post transplant. The first picture was taken about a day after transplant and...

The plants continue to grow. The runty BBB seems to be recovering.

I transplanted my plants into their 2.2 gallon veg containers yesterday afternoon. It was relatively simple to transplant out of the dividers that the plants were previously in. There were .55 gallons of coco/perlite for each plant in the divider. I subtracted this from 2.2 gallons and that...

On to the next page. AREA 51 IS FINALLY COMPLETELY BUILT!!! There were three new 20A circuits installed with new outlets for each circuit. This gives me four total 20A circuits in the room, plus the A/C. I am not using nearly this many watts but it sure is nice to be operating with safe...

The electricians rescheduled until today. Here is a shot of the plants from yesterday. There has been a lot of growth. 10/23 10/20 The autopots are working just fine but I did need to top water the smaller plants in the feeder on the left in the photos.

One seedling did not make it. I have 2x BBB, 3x The Hive, and 2x GMS. I will throw one GMS away when I transplant to veg. Placed these pots in the easy2grow feeder. I know I forgot to fill the capillary holes in the dividers so I'm not sure the autopots will really work until the transplant...

All 8 seeds have germinated. I will be replanting these in a few weeks into their final veg containers where they will veg until the new year. I'm looking forward to my first harvest hopefully in March.

Discovered last night that the whole room in on one 20A circuit. I have no clue how I let that happen when the room was being built. Costly error, but I'm going to get that fixed. This shouldn't delay the grow very much if at all.

At least six of my seeds have germinated! I have two of each strain so far. Here's a gratuitous picture of my flower area with only the UV light bars turned on. Everything is set up in the grow. Over the next couple of months I will need to do only a limited number of tasks: Get extension...

The grow room, Area 51, is almost completely set up. There is very little left to do and nothing that needs to be done until the plants are done vegging. I started: 2x Blueberry Bang Bang 3x Grand Master Sexy 3x The Hive So far, 1 BBB and 1 GMS have sprouted. I need 6 total. Anything above...

The garage was a nightmare to get rebuilt but I am finally about done! Getting things rolling again.

I believe my autopots are working now. They just needed to be level. The garage is patched and now all that needs done is paint. I need to transplant asap so I'm hoping I can move my supplies in there sometime next week. Moving right along. This journal might get a little more interesting...

So far so good with V basis and autopots. Easy as pie

I did a major defoliation and rearranged the tent. I believe the issues i have been having with the auotpots are due to the bases not being level. If this is so, it should not be a problem in the garage.